YC90S 2 3450 rpm 1.5 hp 1.5hp single phase electric motor
- Category: >>>
- Supplier: Fujian Malasong Motor Co. Ltd.
Share on (1600588639680):
Product Overview
Description
YCL series industrial 0.5HP single phase electric motors
SPECIFICATION
Type | YC80B-4 |
Power | 0.5HP/0.37KW |
Current | 4.4A |
Voltage | 220V |
Frequency | 50HZ |
Speed | 1380 rpm/min |
Eff | 60% |
Power Factor | 0.64 |
Tst/Tn (Times) | 3 |
Tmax/Tn (Times) | 2 |
Isn/In(Times) | 6 |
PACKING & DELIVERY
We have Carton and Plywood for choices
Company Profile
SERVICE
MOTOR KNOWLEDGE
What are the factors that affect the temperature rise of the motor
① The voltage is more than 10% higher than the rated value, causing the magnetic field strength of the stator and rotor to increase, resulting in increased iron loss and heating. When the voltage is lower than 5% of the rated voltage, since the load power is basically constant, then the stator of the motor The coil must increase the current to make the motor run with overload, which is the jingle of the electrician: the high voltage burns the light bulb, and the low voltage burns the motor.
② In the mechanical part of the motor, the bearing of the motor is damaged, which increases the load of the motor and causes the temperature rise of the motor; the end cover of the motor is damaged, causing the rotor of the motor to run out of the outer circle, the rotor of the motor is swept, and the motor is heated.
③The foundation of the motor is not installed firmly, causing vibration and friction and heat.
④ The cooling fan blades of the motor are damaged, or the cooling air duct is blocked, resulting in poor heat dissipation and increasing the temperature of the motor.
① The voltage is more than 10% higher than the rated value, causing the magnetic field strength of the stator and rotor to increase, resulting in increased iron loss and heating. When the voltage is lower than 5% of the rated voltage, since the load power is basically constant, then the stator of the motor The coil must increase the current to make the motor run with overload, which is the jingle of the electrician: the high voltage burns the light bulb, and the low voltage burns the motor.
② In the mechanical part of the motor, the bearing of the motor is damaged, which increases the load of the motor and causes the temperature rise of the motor; the end cover of the motor is damaged, causing the rotor of the motor to run out of the outer circle, the rotor of the motor is swept, and the motor is heated.
③The foundation of the motor is not installed firmly, causing vibration and friction and heat.
④ The cooling fan blades of the motor are damaged, or the cooling air duct is blocked, resulting in poor heat dissipation and increasing the temperature of the motor.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
