Share on:
Silver3D SLS Printing Powder Data Sheet | ||||||||||
Physical | PA12 | PA12-GF | PA12-CF | PA6 | PA6-GF | |||||
Packed Density | 0.52g/cm3 | 0.64g/cm3 | 0.45g/cm3 | 0.50g/cm3 | 0.65 g/cm3 | |||||
Particle Size (D50) | 55 μm | 50 μm | 45 μm | 65 μm | 62 μm | |||||
Part Density | 0.96g/cm3 | 1.25g/cm3 | 1.09g/cm3 | 1.14g/cm3 | 1.14 g/cm3 | |||||
Tensile Strength | 46MPa | 48 MPa | 65 MPa | 64 MPa | 59 MPa | |||||
Tensile Modulus | 1350 MPa | 2950 MPa | / | / | / | |||||
Elongation at Break | 25 % | 8.9 % | 4 % | 15 % | 5 % | |||||
Flexural Strength | 44 MPa | 61 MPa | 85 MPa | 75 MPa | 75 MPa | |||||
Flexural Modulus | 1280 MPa | 2340 MPa | 2800 MPa | 1450 MPa | 6500 MPa | |||||
Izod Impact Strength (Unnotched) | 25 KJ/m2 | 36 KJ/m2 | 18 KJ/m2 | 30 KJ/m2 | 15 KJ/m2 | |||||
zod Impact Strength (Notched) | 6.9KJ/m2 | 8.7 KJ/m2 | / | / | / | |||||
Melting Temperature (Powder) | 185 ℃ | 185 ℃ | 186 ℃ | 198 ℃ | 198 ℃ | |||||
Melting Temperature (Sintered Parts) | 178 ℃ | 178 ℃ | 178 ℃ | 193 ℃ | 193 ℃ | |||||
Notice:The data contained in this document is based on trials carried out by our Research Centers. Properties are dependant upon process conditions and mechine used, so these figures are only given for information. |