Lamellar Settling Lamella Plate Vertical Clarifier With Flocculant Into Separator For Waste Water Treatment
- Category: >>>
- Supplier: Qingdao,All,Universe,Machinery,Equipment,Co.,Ltd.
Share on:
Product Overview
Description
Product Overview
The lamella settler is a device mainly used in water separation to remove solid from water by means of gravity.
Because of the Lamella technology, a Lamella Settler with minimum 20% footprint of a conventional one is still capable of
processing the same water amount. This technology based on Shallow Tank Theory uses inclined plates to separate solid from water flow, reaching a high separation rate. The sludge cohered to plates will slope down to the conical bottom for further dewatering and concentrating, while the upper flow clean water is collected by the container above.
Because of the Lamella technology, a Lamella Settler with minimum 20% footprint of a conventional one is still capable of
processing the same water amount. This technology based on Shallow Tank Theory uses inclined plates to separate solid from water flow, reaching a high separation rate. The sludge cohered to plates will slope down to the conical bottom for further dewatering and concentrating, while the upper flow clean water is collected by the container above.
Application :
Lamella clarifier can be used in the treatment of industrial wastewater, surface water, reused water.
It could remove SS, oil/grease and parts of COD/BOD
*Pulp & paper
*Electroplating
*Metal processing
*Muddy water
*Coal slurry
*Crystal grinding wastewater
*River water
Equipment Features
1. Capacity 5-120m3/ h.
2. Efficient treatment of high concentrations of solid waste water (grit, clay, lime, metal particles).
3. The smallest floor area , maximum capacity
4. Install both in indoors and outdoors (but the ambient temperature needs above 0 °C).
5. Slope sedimentation tank can create a good laminar flow environment, to achieve better precipitation effect
6. Intensive design, minimize the hydraulic interference caused by wind or temperature changes
7. Suitable for on-site unattended automatic continuous operation.
8. Life time of carbon steel material> 10 years; Life time of stainless steel material> 20 years.
It could remove SS, oil/grease and parts of COD/BOD
*Pulp & paper
*Electroplating
*Metal processing
*Muddy water
*Coal slurry
*Crystal grinding wastewater
*River water
Equipment Features
1. Capacity 5-120m3/ h.
2. Efficient treatment of high concentrations of solid waste water (grit, clay, lime, metal particles).
3. The smallest floor area , maximum capacity
4. Install both in indoors and outdoors (but the ambient temperature needs above 0 °C).
5. Slope sedimentation tank can create a good laminar flow environment, to achieve better precipitation effect
6. Intensive design, minimize the hydraulic interference caused by wind or temperature changes
7. Suitable for on-site unattended automatic continuous operation.
8. Life time of carbon steel material> 10 years; Life time of stainless steel material> 20 years.
Detail Images
Main technique parameter:
Packing&Shipping
Installl
Our Comapny
Our Service
Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* We are available 24 hours for customers.
*Service concept: Exceed clients' expectation.
*Presale service: Free comprehensive and detailed *technology consultancy, help client find the most suitable lift or solutions.
*In sale service:guidance of installation and debugging and free training of operation, care and maintenance.
* Sample testing support.
* We are available 24 hours for customers.
*Service concept: Exceed clients' expectation.
*Presale service: Free comprehensive and detailed *technology consultancy, help client find the most suitable lift or solutions.
*In sale service:guidance of installation and debugging and free training of operation, care and maintenance.
After-Sales Service
* Training how to install the machine, training how to use.
* Engineers available to service machinery overseas.
*After-sale service: 12 months warranty service of whole machine and lifetime maintenance;
*Quick responses: inquires or after-sale questions be replied within 24 hours.
*Parts supply: we have a complete parts supply network and can guarantee sufficient parts reserves and timely supply, with only
cost charge after guarantee period.
* Engineers available to service machinery overseas.
*After-sale service: 12 months warranty service of whole machine and lifetime maintenance;
*Quick responses: inquires or after-sale questions be replied within 24 hours.
*Parts supply: we have a complete parts supply network and can guarantee sufficient parts reserves and timely supply, with only
cost charge after guarantee period.
FAQ
1Q:How to buy your idea products?
A:You can provide us your water sources, water quality, flow rate and ground area (connect us for more details).
2Q:How to pay?
A:TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
3Q:What is the delivery time?
A:It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
4Q:How to pack the products?
A:We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
5Q:How do you manufacture your equipment?
A:Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending.
6Q:How to install after the equipments arriving destination?
A:We will provide detailed illustrations to you. Our technicians to will help you online .
A:You can provide us your water sources, water quality, flow rate and ground area (connect us for more details).
2Q:How to pay?
A:TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
3Q:What is the delivery time?
A:It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
4Q:How to pack the products?
A:We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
5Q:How do you manufacture your equipment?
A:Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending.
6Q:How to install after the equipments arriving destination?
A:We will provide detailed illustrations to you. Our technicians to will help you online .
Contact Us
We Recommend
