High quality 136*148*1.6mm 8-wire FRP agm battery composite separator wholesale E-glass for Power Systems fiberglass yarn
- Category: >>>
- Supplier: Jiangyin,Xufang,Chemicals,Co.,Ltd.
Share on:
Product Overview
Description
Product Description
Features
1.The sb Pb Ca grid alloys and high purity raw materials, battery self discharge, 25 DEG C storage for three months, self discharge rate <2.0%; suction fluid volume is very large, suction speed, good water permeability, absorption and keep the battery rated capacity of electrolyte.
2.AGM battery has good charging efficiency, the specific surface area is large, the porosity is high, so long as the electric liquid frequency is lack, it can guarantee that the oxygen generated by the positive electrode can spread to the negative electrode through the separator.
3.The group adopts tight assembly, less resistance (usually 0.2-0.4m), suitable for high current discharge; small aperture, which can effectively prevent the short circuit of the battery.
4.Due to the adoption of lean solution design, gas recombination efficiency higher, more than 98%, so there is no acid mist from escaping; high chemical purity, does not contain any self discharge impurities
5.The initial capacity is high, third cycle period can reach 100% above the rated capacity; acid resistance and good oxidation resistance
6.Have good low temperature discharge performance, low resistance.
2.AGM battery has good charging efficiency, the specific surface area is large, the porosity is high, so long as the electric liquid frequency is lack, it can guarantee that the oxygen generated by the positive electrode can spread to the negative electrode through the separator.
3.The group adopts tight assembly, less resistance (usually 0.2-0.4m), suitable for high current discharge; small aperture, which can effectively prevent the short circuit of the battery.
4.Due to the adoption of lean solution design, gas recombination efficiency higher, more than 98%, so there is no acid mist from escaping; high chemical purity, does not contain any self discharge impurities
5.The initial capacity is high, third cycle period can reach 100% above the rated capacity; acid resistance and good oxidation resistance
6.Have good low temperature discharge performance, low resistance.
Application
1. UPS power supply2. Electrical power system
3. Railway signal
4. Telecommunication equipment
5. Emergency lighting
6. Fire control and Alarming system
7. Generator starting
8. Electrical car and Motor-cycle
9. Value-regulated
10. Solar & Wind power.
3. Railway signal
4. Telecommunication equipment
5. Emergency lighting
6. Fire control and Alarming system
7. Generator starting
8. Electrical car and Motor-cycle
9. Value-regulated
10. Solar & Wind power.
Specification
Technique: | Chopped Strand Fiberglass Mat (CSM) |
Mat Type: | Facing (Surfacing) Mat |
Fiberglass Type: | E-glass |
Softness: | Soft |
Color: | White; yellow |
Thickness: | 0.01-3.0mm |
Width: | 0-1500mm |
Binder Content: | 15 |
Application: | Construction |
Packing & Delivery
We Recommend
Highest Quality LED New Small Electric Cars For Disabled Persons Car sale cheap
$1,460.99 - $1,642.99
