Массажный пистолет Suzhou, контроль качества, инспекционная служба, Служба контроля качества

Share on:


Price:168,00 $
Price in USD:Details

Quantity:


Product Overview

Description



Product Description


Brand name
Weproving Inspection
Service type
Initial Production Check, During production inspection service, Pre-shipment inspection service
Inspection Place
Most Chinese Cities, Vietnam
Inspection Report
Detailed Inspection Report will be issued within 24hours


Company Profile






FA/SA-(Factory/ Supplier Audit)
By Factory or supplier audit, the client will get a general knowledge of basic conditions of suppliers, so that they are able to have a comprehensive consideration in selecting suppliers, which includes not only price factor, but also the production capacity, payment risk, leading time risk, and quality risk.

Mainly includes:
Supplier legitimacy: Business license; house proprietary certificate; export license; bank basic account and collecting account and so on.
Production capacity: Factory area,Production equipment, staff and storage area, etc.
Quality control: Quality control procedure documents and the quality department fulfillment degree.
PSI/FRI-(Pre-Shipment Inspection)
Pre-Shipment Inspection refers to an inspection carried out when all the goods are produced and packed completely. By conducting a sampling check in accordance with the AQL standard, to have an overall assessment of the quality of the goods.

Mainly includes:
quantity check, workmanship check, product size and weight, product performance parameters, product color, outer carton measurement, various labels and LOGO, etc.


IPC-(Initial Production Check)
Initial Product Check is done before production and after the materials is ready. Initial Product Check is to
make sure before the goods are produced, all kinds of materials are correct, and conform to the golden sample. It can effectively avoid the risks caused by incorrect material or other errors in the production of goods. To stop problems before they start.

Mainly includes:
Material textures (see if needs to be sent to the laboratory), color, size, feel, physical and chemical
performance, etc.
DPI-(During Production Inspection)
During production inspection will be carried out when the goods are 30% finished. This inspection can find out
whether the factory has problems and deficiencies in the production process. Help the factory to improve the production process, strengthen the quality control, and truly reflect the production progress and quality of goods. It can effectively show the problems existing in the actual production of the factory and help to improve in time.

Mainly includes:
Quantity check, workmanship check, production schedule check, and if product sizes and other parameters meet the requirements




CLC/CLS-(Container Loading Check)
Container Loading Check is to supervise the container loading process when the factory shipping the goods. It can effectively
avoid loading incorrect goods, or incorrect quantity, short or over shipment.

Mainly includes:
Check quantity, loaded product, container status (cleanliness, moisture, rust, holes, etc.); and monitor the loading process to ensure no damaged products and outer carton are loaded into the container.
Also remind factory to reinforce products when container is not full.
The whole supervision process will continue till all the goods are fully loaded and the container was locked with the lead seal of shipping company




1. Quantity Check
Generally, quantity check will be performed in during-production inspection(DPI), Pre-shipment / final inspection(PSI/FRI), Full inspection and container loading check(CLC). It includes cartons quantity check and products per inner package check. And for final inspection, the products must be 100% finished and at least 80% finished.





The actual numbers will be recorded in the report as below:




2. Workmanship
Workmanship is a very important section in the whole process of inspection. It will cause in FAIL if the number of defects were too much. Generally, the inspection standard is according to AQL standard, the form of ANSI/ASQZ1.4 (MIL-STD-105E). For sample size and the defects acceptance, level II and 0 for Critical, 2.5 for major and 4.0 for minor will be adopted, if there is no special requirements from clients.






3.ON-Site Test
Testing is the most important part of inspection.
The main purpose is to check the basic function of product, the safety, durability, and all other performances.
The test items varies according to the products kinds.
Below are some common testing items for your reference:








4. Package & Product Measurement
Generally, measurement check includes package size & weight check and product size & weight check.
The check quantity is 1pc per item with the tolerance of 10% for package and 5% for product, if the actual results were different from the spec or requirements.


5. Client's special requirement
If clients have their own requirements of the products, pls inform me.Almost all requirements can be achieved, and pls refer to the bellow chart for more details.












1. Why do I need shipment inspections or factory audits?
In case of any poor quality, incorrect shipments, unreal information from suppliers. Inspection and audit are the most efficient way to protect buyer’s right.

2. How to book the inspection?
-Client sends us the inspection inquiry 2-3days in advance. We contact Factory to confirm the inspection.
-Client Confirm the inspection plan and pay. Then we perform the inspection and feedback inspection report within 12hours after inspection.

3. What we need to provide you for inspection?
-Factory contact number
-Products information as well as your special quality control requirement if you have.
-Some client will send approved samples also.

4. What information does the inspection report include?
Our written reports are very detailed, including accurate description of all defects and inconsistencies, statistic analysis based on the highly recognized AQL standard and plentiful spot pictures for illustration.
A written report + Inspection video + Original pictures will provided with 24hours after inspection

5. What the Inspection rate?
Inspection general rate is USD168.00/Man-day for most coastal ctities. Specific inspection rate depends on product type, order quantity and inspection address.
This quotation contains all cost: travel cost + inspection cost + report cost. No other fee need.
Our maximum workload in 1day is around 6hours.

6. What payment method that we accept?
Bank Transfer, Paypal or Alibaba trade order.
Inspection payment always need be prepaid 100% before inspection.





Please feel free to contact me, I will always be at your service!!!






0.0617 s.