US Wall Plug POE Injector with 48V Power Supply IEEE802.3af for Most Cisco/Polycom/Aastra IP Voip Phones Camera and More

Product Overview

Description

US Wall Plug POE Injector with 48V Power Supply IEEE802.3af for Most Cisco/Polycom/Aastra IP Voip Phones Camera and More, 10/100Mbps Introductions

Notice:

Our POE injector Power input :4&5(+), 7&8(-);
It support 802.3af standard POE products. But please make sure it also have same power input.
Some 802.3af product only support 1&2(+), 3&6(-) power input, not support :4&5(+), 7&8(-). It not work with such product.

Introduction:
This Non standard active PoE injector is a simple and convenient power supply equipment for PoE or Non PoE devices via only an Ethernet cable, which will save your trouble about power line cabling and save cost. This PoE injector not have auto detection function and directly supply power to the network devices by force as soon as you connect them, so you must be sure that powered devices conform to standard IEEE 802.3af in order to protect them from burning.

Features:
1. Power Output

Rated voltage: DC12V/DC 48V/DC15V/DC 24V

Rated current: 2A/1A/0.5A

Power pin: 4&5(+), 7&8(-);

Data Pin: 1236

Network interface: 100M;

2. Power Input

Rated Voltage range: 100~240VAC

Frequency range: 50~60Hz

3. Applications:

Non PoE Device such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices.

Photos: