CONTEC 5 6 7 8 9 10L available Oxygen Concentrator oxygen generator
- Category: >>>
- Supplier: Contec Medical Systems Co. Ltd.
Share on (1600629258179):
Product Overview
Description
Product Description
Introduction
CONTEC21-X Oxygen Concentrator consisted of air compressor, adsorption tower of molecular sieve, sensor and flowrate controller.
With the molecular sieve to be absorbent, the machine adopts PSA(pressure swing absorbers ) method to directly concentrate medical
oxygen with high concentration from the air.
It is small and mobile. The machine takes the advantages of small in volume, light in weight, convenient in moving (as it has
turning truckle), stable in performance, high in safety, easy in operating, low in noise, safe in working, which complies with
requirements of medical device.
The machine has a wide application, including clinic, hospital, oxygen bar, plateau outpost, gym center, etc.
Function
1)With working indicator
2)Built-in filters to pure the gas
3)Oxygen concentration status indicator
4)Oxygen flow indication
5)Function of accumulating time
6)Function of timing shutdown
7)Alarm for power failure
8)Alarm for high/low pressure protection
9)Alarm for low flowrate
10)Alarm for high temperature
Performance
Maximum flowrate recommended: 10 L/min
Oxygen Output Concentration Levels: 93 %±3 %
Flowrate range: 0.5 L/min~10 L/min
Flowrate change at maximum recommended flowrate with 7 kPa back pressure: <1 L/min.
Outlet pressure: 20 kPa~50 kPa
Input Power Consumption: 700 VA
Electrical Requirements: AC110 V±10 % ~ 60 Hz±1 Hz
AC220 V±10 % ~5 0 Hz±1 Hz
AC220 V±10 % ~ 60 Hz±1 Hz
Operating noise: ≤60 dB(A)
Safety categories
1) Type of protection against electroshock: class Ⅱ equipment
2) Degree of protection against electroshock: Type BF applied part
3) Degree of protection against ingress of water: IP21
Accessories
Humidifier bottle
User manual
Power cord
Nasal cannula
Physical characteristic
Dimension: 508 mm×260 mm×530 mm
Weight: 28 kg
Environment
a) Temperature: 10 ℃~40 ℃
b) Relative humidity: ≤80 %
c) Atmospheric pressure: 860 hPa~1060 hPa
CONTEC21-X Oxygen Concentrator consisted of air compressor, adsorption tower of molecular sieve, sensor and flowrate controller.
With the molecular sieve to be absorbent, the machine adopts PSA(pressure swing absorbers ) method to directly concentrate medical
oxygen with high concentration from the air.
It is small and mobile. The machine takes the advantages of small in volume, light in weight, convenient in moving (as it has
turning truckle), stable in performance, high in safety, easy in operating, low in noise, safe in working, which complies with
requirements of medical device.
The machine has a wide application, including clinic, hospital, oxygen bar, plateau outpost, gym center, etc.
Function
1)With working indicator
2)Built-in filters to pure the gas
3)Oxygen concentration status indicator
4)Oxygen flow indication
5)Function of accumulating time
6)Function of timing shutdown
7)Alarm for power failure
8)Alarm for high/low pressure protection
9)Alarm for low flowrate
10)Alarm for high temperature
Performance
Maximum flowrate recommended: 10 L/min
Oxygen Output Concentration Levels: 93 %±3 %
Flowrate range: 0.5 L/min~10 L/min
Flowrate change at maximum recommended flowrate with 7 kPa back pressure: <1 L/min.
Outlet pressure: 20 kPa~50 kPa
Input Power Consumption: 700 VA
Electrical Requirements: AC110 V±10 % ~ 60 Hz±1 Hz
AC220 V±10 % ~5 0 Hz±1 Hz
AC220 V±10 % ~ 60 Hz±1 Hz
Operating noise: ≤60 dB(A)
Safety categories
1) Type of protection against electroshock: class Ⅱ equipment
2) Degree of protection against electroshock: Type BF applied part
3) Degree of protection against ingress of water: IP21
Accessories
Humidifier bottle
User manual
Power cord
Nasal cannula
Physical characteristic
Dimension: 508 mm×260 mm×530 mm
Weight: 28 kg
Environment
a) Temperature: 10 ℃~40 ℃
b) Relative humidity: ≤80 %
c) Atmospheric pressure: 860 hPa~1060 hPa
Company Profile
Q: Are you manufacturer or reseller?
A: We are manufacturer who has more than 25 years experience on research & design, production and sale.
A: We are manufacturer who has more than 25 years experience on research & design, production and sale.
Q: Where your factory located in? How can I visit it?
A: Our factory located in Qinhuangdao city, Hebei Province, P.R.China, about 2 hours by train from Beijing. We warmly welcome for
your visiting!
your visiting!
Q: Do you support customization? such as provide box according to my design or print my logo on the gift box or device?
A: Of course, we support OEM/ODM service. we can help design box according to your requirement. Moreover, we can also make mould
to provide device with different appearance.
A: Of course, we support OEM/ODM service. we can help design box according to your requirement. Moreover, we can also make mould
to provide device with different appearance.
Q: How can i place an order?
A: We support alibaba trade assurance order, you can place order directly or contact us to draft order and send you payment link;
we can also issue invoice for you to pay by TT/Paypal/LC/Western Union etc.
A: We support alibaba trade assurance order, you can place order directly or contact us to draft order and send you payment link;
we can also issue invoice for you to pay by TT/Paypal/LC/Western Union etc.
Q: How many days for shipping after payment done?
A: Sample order will be sent within 2 days after receiving sample fee. 3-20 days for general order according to the quantity.
Customized order need mutual negotiation.
A: Sample order will be sent within 2 days after receiving sample fee. 3-20 days for general order according to the quantity.
Customized order need mutual negotiation.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
