CNC Controller kit stepper motor with supply power with controller board 4 Axis name 23 stepper motor kit
- Category: >>>
- Supplier: Suzhou Penny Machinery Equipment Co. Ltd.
Share on (1600635286754):
Product Overview
Description
Kit 1 --- 3pcs 57HS11230A4D8 3A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V(No Controller)
Kit 2 --- 3pcs 57HS11230A4D8 3A Double + 1pcs 57HS8230A4D8 3A Double + 1pcs Supply power 500W-36V(No Controller)
Kit 3 --- 3pcs 57HS11242A4D8 4.2A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V(No Controller)
Kit 4 --- 3pcs 57HS11230A4D8 3A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V + Controller Card DB25
Kit 5 --- 3pcs 57HS11230A4D8 3A Double + 1pcs 57HS8230A4D8 3A Double + 1pcs Supply power 500W-36V + Controller Card DB25
Kit 6 --- 3pcs 57HS11242A4D8 4.2A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V + Controller Card DB25
Kit 7 --- 3pcs 57HS11230A4D8 3A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V + Controller Card MKS4-V
Kit 8 --- 3pcs 57HS11230A4D8 3A Double + 1pcs 57HS8230A4D8 3A Double + 1pcs Supply power 500W-36V + Controller Card MKS4-V
Kit 9 --- 3pcs 57HS11242A4D8 4.2A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V + Controller Card MKS4-V
Kit 2 --- 3pcs 57HS11230A4D8 3A Double + 1pcs 57HS8230A4D8 3A Double + 1pcs Supply power 500W-36V(No Controller)
Kit 3 --- 3pcs 57HS11242A4D8 4.2A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V(No Controller)
Kit 4 --- 3pcs 57HS11230A4D8 3A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V + Controller Card DB25
Kit 5 --- 3pcs 57HS11230A4D8 3A Double + 1pcs 57HS8230A4D8 3A Double + 1pcs Supply power 500W-36V + Controller Card DB25
Kit 6 --- 3pcs 57HS11242A4D8 4.2A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V + Controller Card DB25
Kit 7 --- 3pcs 57HS11230A4D8 3A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V + Controller Card MKS4-V
Kit 8 --- 3pcs 57HS11230A4D8 3A Double + 1pcs 57HS8230A4D8 3A Double + 1pcs Supply power 500W-36V + Controller Card MKS4-V
Kit 9 --- 3pcs 57HS11242A4D8 4.2A Single + 1pcs 57HS8230A4D8 3A Single + 1pcs Supply power 500W-36V + Controller Card MKS4-V
Basic parameter:
Phase:2
Step Angle:1.8 deg
Voltage:4.8v
Current:3.0A
Resistence:1.6Ω
Inductance:6.8mH
Holding Torque:3.0Nm
Shaft Diameter:8mm
Single Shaft
Step Angle:1.8 deg
Voltage:4.8v
Current:3.0A
Resistence:1.6Ω
Inductance:6.8mH
Holding Torque:3.0Nm
Shaft Diameter:8mm
Single Shaft
Series Model | Step Angle(°） | Motor Length(mm) | Shaft diameter(mm) | Shaft Length(mm) | Current/Phase(A) |
57HS11230A4D8 | 0.9 | 112 | 8 | 21 | 3 |
Resistance/Phase(Ω) | Inductance/Phase(mH) | Holding Torque(N.m) | Detent Torque(N.cm) | Rotor Inertiam(g.cm2) | Lead Wire(NO.1) |
1.6 | 6.8 | 3 | 12 | 800 | 4 |
Advantage:
1. The magnetic steel is high grade,we usually use the SH level type.
2. The rotor is be coated,reduce burrs,working smoothly,less noise.
3. We test the stepper motor parts step by step.Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
2. The rotor is be coated,reduce burrs,working smoothly,less noise.
3. We test the stepper motor parts step by step.Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
Phase:2
Step Angle:1.8 deg
Voltage:4.8v
Current:3.0A
Resistence:1.6Ω
Inductance:6.8mH
Holding Torque:3.0Nm
Shaft Diameter:8mm
Double Shaft
Step Angle:1.8 deg
Voltage:4.8v
Current:3.0A
Resistence:1.6Ω
Inductance:6.8mH
Holding Torque:3.0Nm
Shaft Diameter:8mm
Double Shaft
Series Model | Step Angle(°） | Motor Length(mm) | Shaft diameter(mm) | Shaft Length(mm) | Current/Phase(A) |
57HS11230B4D8 | 0.9 | 112 | 8 | 21 | 3 |
Resistance/Phase(Ω) | Inductance/Phase(mH) | Holding Torque(N.m) | Detent Torque(N.cm) | Rotor Inertiam(g.cm2) | Lead Wire(NO.1) |
1.6 | 6.8 | 3 | 12 | 800 | 4 |
Advantage:
1. The magnetic steel is high grade,we usually use the SH level type.
2. The rotor is be coated,reduce burrs,working smoothly,less noise.
3. We test the stepper motor parts step by step.Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
2. The rotor is be coated,reduce burrs,working smoothly,less noise.
3. We test the stepper motor parts step by step.Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
Phase:2
Step Angle:1.8 deg
Voltage:6.3v
Current:4.2A
Resistence:0.9Ω
Inductance:3.8mH
Holding Torque:3.2Nm
Shaft Diameter:8mm
Single Shaft
Step Angle:1.8 deg
Voltage:6.3v
Current:4.2A
Resistence:0.9Ω
Inductance:3.8mH
Holding Torque:3.2Nm
Shaft Diameter:8mm
Single Shaft
Series Model | Step Angle(°） | Motor Length(mm) | Shaft diameter(mm) | Shaft Length(mm) | Current/Phase(A) |
57HS11242A4D8 | 0.9 | 112 | 8 | 30 | 4.2 |
Resistance/Phase(Ω) | Inductance/Phase(mH) | Holding Torque(N.m) | Detent Torque(N.cm) | Rotor Inertiam(g.cm2) | Lead Wire(NO.1) |
0.9 | 4.0 | 3.2 | 12 | 800 | 4 |
Advantage:
1. The magnetic steel is high grade,we usually use the SH level type.
2. The rotor is be coated,reduce burrs,working smoothly,less noise.
3. We test the stepper motor parts step by step.Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
2. The rotor is be coated,reduce burrs,working smoothly,less noise.
3. We test the stepper motor parts step by step.Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
Phase:2
Step Angle:1.8 deg
Voltage:3.6v
Current:3.0A
Resistence:1.2Ω
Inductance:4.0mH
Holding Torque:2.2Nm
Shaft Diameter:8mm
Single Shaft
Step Angle:1.8 deg
Voltage:3.6v
Current:3.0A
Resistence:1.2Ω
Inductance:4.0mH
Holding Torque:2.2Nm
Shaft Diameter:8mm
Single Shaft
Series Model | Step Angle(°） | Motor Length(mm) | Shaft diameter(mm) | Shaft Length(mm) | Current/Phase(A) |
57HS8230A4D8 | 0.9 | 82 | 8 | 21 | 3 |
Resistance/Phase(Ω) | Inductance/Phase(mH) | Holding Torque(N.m) | Detent Torque(N.cm) | Rotor Inertiam(g.cm2) | Lead Wire(NO.1) |
1.2 | 4.0 | 2.2 | 8 | 580 | 4 |
Advantage:
1. The magnetic steel is high grade,we usually use the SH level type.
2. The rotor is be coated,reduce burrs,working smoothly,less noise.
3. We test the stepper motor parts step by step.Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
2. The rotor is be coated,reduce burrs,working smoothly,less noise.
3. We test the stepper motor parts step by step.Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
Phase:2
Step Angle:1.8 deg
Voltage:3.6v
Current:3.0A
Resistence:1.2Ω
Inductance:4.0mH
Holding Torque:2.2Nm
Shaft Diameter:8mm
Double Shaft
Step Angle:1.8 deg
Voltage:3.6v
Current:3.0A
Resistence:1.2Ω
Inductance:4.0mH
Holding Torque:2.2Nm
Shaft Diameter:8mm
Double Shaft
Series Model | Step Angle(°） | Motor Length(mm) | Shaft diameter(mm) | Shaft Length(mm) | Current/Phase(A) |
57HS8230B4D8 | 0.9 | 82 | 8 | 21 | 3 |
Resistance/Phase(Ω) | Inductance/Phase(mH) | Holding Torque(N.m) | Detent Torque(N.cm) | Rotor Inertiam(g.cm2) | Lead Wire(NO.1) |
1.2 | 4.0 | 2.2 | 8 | 580 | 4 |
Advantage:
1. The magnetic steel is high grade,we usually use the SH level type.
2. The rotor is be coated,reduce burrs,working smoothly,less noise.
3. We test the stepper motor parts step by step.Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
2. The rotor is be coated,reduce burrs,working smoothly,less noise.
3. We test the stepper motor parts step by step.Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
Model | S-500-36 | Load stability | ±0.5% | ||
DC output voltage, current | 36V 0-14A | Efficlent | 86% | ||
Ripple and noise | 150mVp-p | DC voltage adjustable range | ±10% | ||
Incoming line stability | ±0.5% | Size | 238*124*65mm | ||
Input voltage range | 90~132VAC/180~264VAC by switch 254~370VDC 47~63Hz | ||||
Electric shock | Cold start current 25A/115VAC 50A/230VAC | ||||
Overload protection | 105%~135% Cut off the output automatic recovery | ||||
Overvoltage protection | 115%~150% shut down O/P voltage, re-power on to recover | ||||
Start, rise, hold time | 200ms, 50ms, 20ms/230VAC at full load | ||||
Pressure resistance | I/P-O/P:1.5KVI/P-FG:1.5KVO/P-FG:0.5KV 1minute | ||||
Isolation resistance | I/P-O/PI/P-FGO/P-FG: 500VDC/100MΩ | ||||
Ambient temperature | -10℃~+50℃ | ||||
Weight | 1.35KG | ||||
Certification | ISO900 / CE / RoHS | ||||
Axis output control:
Drive Current : Isolated open collector output; 5V, 20mA
Drive : Pulse + direction output
Output frequency : 2000KHZ
AxIs : 3-axis
Isolation Voltage : 3.5KV
Spindle inverter
output: 3 types of output modes:
Analog voltage output : 0—10V
PWM output : 5V,1KHZ,Duty;0-100%
Pulse+direction output : 5V,15HZ to 4KHZ
4 IO output Drive Current : Isolation:50mA, 25V
4 IO output Isolation Voltage : 3.5KV
8 IO intput Input Current : Isolated inputs, 5 mA, maximum voltage 25V
8 IO intput Isolation Voltage : 3.5KV
USB interface : Complies with USB2.0 standard
Drive Current : Isolated open collector output; 5V, 20mA
Drive : Pulse + direction output
Output frequency : 2000KHZ
AxIs : 3-axis
Isolation Voltage : 3.5KV
Spindle inverter
output: 3 types of output modes:
Analog voltage output : 0—10V
PWM output : 5V,1KHZ,Duty;0-100%
Pulse+direction output : 5V,15HZ to 4KHZ
4 IO output Drive Current : Isolation:50mA, 25V
4 IO output Isolation Voltage : 3.5KV
8 IO intput Input Current : Isolated inputs, 5 mA, maximum voltage 25V
8 IO intput Isolation Voltage : 3.5KV
USB interface : Complies with USB2.0 standard
Category | Parameter Description | ||
Axis output control Pulse+Direction | Dirver current | Isolated open circuit output 5v, 20mA | |
Driver way | Pulse+Direction output | ||
Output frequency | 200KHZ | ||
Support axis | Maximum support 4 axis | ||
Isolation voltage | 3.5KV | ||
Spindle speed control output: support 3 modes of output | Analog speed control voltage output | 0~10V | |
PWM Output | 5V, 1KHZ, Duty cycle, 0~100% | ||
Pulse+Direction Output | 5V, 15HZ to 4KHZ | ||
4 Output ports | Driver current | Isolation: 50mA, 25V | |
Isolation voltage | 3.5KV | ||
Mach3 interface address | MACH3 Interface: P1 | ||
8 Input ports | Input voltage | Isolation input, 5mA, Maxmum voltage 25V | |
Isolation voltage | 3.5KV | ||
Mach3 interface address | MACH3 Interface: P1 | ||
USB Interface | Comply with USB2.0 standard, support full-speed transmission mode. | ||
Shipping Cost
Our products are sold worldwide.
If you need many items in the same time, please contact us in advance to confirm shipping cost.
Payment:
We accept paypal credit, bank transfer, western union etc.
Payment must be made within 7days calendar days of the auction end time.
Problem and Feedback:
PLEASE DON'T leave any negative feedback before you contact us.
We are honest and helpful supplier , we will try our best to solve problems with you.
Your satisfaction is very important for our store, so please contact us before you want to leave a negative feedback.
Thanks very much in advance.
Refund:
If you are NOT SATISFIED with our package like the products is damage, please do not sign it and contact us immediately.
If it is possible, please take some photos or make a small video about it. It will help us to solve the problems.
Note:
We can produce the product according to our customer's design.
If you need something is very special, please contact us about it.
We are willing to help you about it.
Our products are sold worldwide.
If you need many items in the same time, please contact us in advance to confirm shipping cost.
Payment:
We accept paypal credit, bank transfer, western union etc.
Payment must be made within 7days calendar days of the auction end time.
Problem and Feedback:
PLEASE DON'T leave any negative feedback before you contact us.
We are honest and helpful supplier , we will try our best to solve problems with you.
Your satisfaction is very important for our store, so please contact us before you want to leave a negative feedback.
Thanks very much in advance.
Refund:
If you are NOT SATISFIED with our package like the products is damage, please do not sign it and contact us immediately.
If it is possible, please take some photos or make a small video about it. It will help us to solve the problems.
Note:
We can produce the product according to our customer's design.
If you need something is very special, please contact us about it.
We are willing to help you about it.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
