Drum And Wet Type Uzbms Belt High Gradient Magnetic Separator Hematite Separator

Product Overview

Description

Drum And Wet Type Uzbms Belt High Gradient Magnetic Separator Hematite Separator

Drum And Wet Type Uzbms Belt High Gradient Magnetic Separator Hematite Separator

High gradient magnetic separator for concentrating iron ore/magnetic separator manufacturer/gold ore dresssing

 

Introduction of vertical pulsating high gradient magnetic separator

 

CTB half upstream wet drum permanent magnetic separator is usually used for separating fine-grained iron magnetite from non-magnetic materials. Its composite magnetic system consists of high performance rare earth permanent magnet (main magnetic source) and ferrite permanent magnet.

 

With a high magnetic field intensity, this machine can make a continuous row of ore feed and discharge. It also has enough working clearance and high processing capacity.

 

Series CTB half upstream wet drum permanent magnetic ore separator is widely applied in the separation of various kinds of iron ores and gold ore. In order to increase the grade or capacity, several sets of wet drum magnetic separators can be installed in series connection or parallel connection.

 

 

 

 

Application ofDrum And Wet type separator magnet uzbms belt high gradient magnetic separator

 

Nickel and Cobalt Ores Mining &Dressing Magnetic Ore Separator is applicable for wet magnetic separation of materials such as magnetite, pyrrhotite, roasted ore and ilmenite whose size is less than 3 mm and also used for iron removal operation of materials such as coal, nonmetalliferous ore and construction material and so on.

 

 

 

Structure of Drum And Wet Type Uzbms Belt High Gradient Magnetic Separator Hematite Separator

 

Yufeng CTB magnetic separator consists of magnetic drum, tank body, support, feed box, discharge box (ore concentrate box), drive motor, motor reducer, control box, etc. The magnetic drum is made of stainless steel (thickness: 3mm) and covered with wear resistant rubber.

 

 

Working Principle of uzbms belt high gradient magnetic separator

The mineral slurry flows into the cell through box feeder, the mineral particle is loose under the function of water flow of feeder

water pipe when they flow into the cell. Affected by magnetic field, the magnetic particle swarm together and form magnetic cluster or chain. With the magnetism of mineral slurry, the magnetic cluster or chain moves toward the magnetic pole, and is absorbed to the cylinder. Because of the polarity of magnetic pole, the revolving directions alternate constantly, and remain fixed when it is working. When the magnetic cluster and chain go round and round along with the cylinder, the mingled gangue and other non-magnetic ore fall down due to the mixing phenomena produced by alternation of magnetic poles, and it is concentrate that is absorbed to the cylinder surface. The concentrate moves to the end of magnetic system where the magnetism is weakest along with the revolving cylinder, and is discharged into concentrate tank by the current ejected by the discharging-ore pipe. The non-magnetic or weak magnetic remained are discharged along with the mineral slurry, and they are gangue.

 

 

 

Characteristics of high gradient magnetic separator

Magnetic system of Magnetic Ore Separator adopts high quality ferrite material or is compounded with rare earth and magnetic steel.

Average magnetic intensity on the surface of cylinder is 100~600 mT. According to the user’s need, magnetic system with many different kinds of surface intensity such as fair current, half reverse flow and counterflow can be provided.

This magnetic separator has the charateristics of single structure, large capacity, easy operation and maintenance.

 

 

Technical Parameters of vertical ring high gradient magnetic separator

 

Model	Motor (KW)	Speed of bucket (r/min)	Capacity (T/H)	Shell size (mm)	Weight (KG)
CTB600× 900	1.5	40	8-15	600*900	750
CTB600×1200	1.5	40	10-20	600*1200	1050
CTB600× 1800	2.2	40	15-30	600*1800	1340
CTB750×1800	3.0	35	20-45	750*1800	2100
CTB900×1800	4.0	28	25-55	900*1800	3000
CTB900× 2400	4.0	28	35-70	900*2400	3800
CTB1050×2100	5.5	22	45-90	1050*2100	4500
CTB1050× 2400	5.5	22	52-100	1050*2400	5000
CTB1200×2400	7.5	19	82-120	1200*2400	6200

 

 

 

Training & service 

 

Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you.

 

In addition, we provide 2-years warranty to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

 

 

Why choose Yufchina?

 

We are manufacturer in Zhengzhou, which serves as the largest base of Chinese industrial technology, and the busiest container port in the world. The competition in this city is severe, only companies with ending technology, stable workforce, and effective cost management could survive.

With 25 years of efforts and innovation,our company is now a leading brand in China.

Affordable, high-quality machines. Our highly competitive price relies upon our ability to minimize our costs, of which our competitors don’t.

 

1. We are factory(NOT Dealer)

2. We own our factory & Land (NOT Rent)

3. Staff reside in factory(Stable Workforce)

 

 

 

...