Attention on industrial incubator for hatching eggs
1.Test your incubator to see if it functions properly 2.Connect the egg turner plug to the control plug inside the egg compartment 3.Fill one or both water channels dependingon local humidity levels 4.Set the eggs with the pointy side down 5.Close the lid and switch on the incubator 6.Press the reset button to reset and start the day counter from "0"(this will also reset the egg turning countdown back to "1:59" 7.Keep an eye on the humidity reading and fill the water channel when needed(normally every 4 days) 8.At day 18 you should remove the tray with the turning mechanism and place eggs on top of the bottom grid 9.At the same time it is important to fill water channels to increase the humidity (it is very important to ensure that eggshells are soft enough for chickens break through)