China Manufacture Aluminum Rotary On-Line Degasser Chamber Aluminum Ingot Die Casting Machine

Share on:


Price:$5,000.00
Price in USD:Details

Quantity:


Product Overview

Description



Product Description


Application:
The sealing structure of AdTech Degassing Equipment is based on the sealing method of vacuum degassing equipment. The sealing between the box and the box cover, the sealing of the inlet and outlet flow grooves, the sealing of the rotor heater protective cover and the box cover are fully carried out. The sealing design can effectively prevent the slag formation caused by the secondary oxidation of the aluminum melt, and effectively improve the degassing effect.


The degassing of aluminum is based on the principle that dissolved hydrogen gas will move from an area of high concentration (in the melt) to an area of low concentration (in the inert gas). Hydrogen gas disperses in molten metal as it would if it were released in any confined space. It will maintain a constant concentration throughout the melt. Hydrogen gas can migrate in liquid metal almost as fast as it can in air. Therefore, it is unnecessary to bring every ounce of metal in contact with the inert gas. The efficiency of aluminum degassing is determined by two factors, the transfer rate across the metal/gas interface and the total surface area available for transfer.


 


0QQ20220113141838-3


Why choose us:
1. High degassing efficiency, the average degassing efficiency is above 65%. It is not inferior to the degassing efficiency of fully imported equipment.
2. The sealing effect is good, and the sealing method of vacuum degassing is adopted, and the sealing of the entire box body and the box cover, the sealing of the rotor and the heater protection sleeve and the box cover is the best.
3. Good thermal insulation performance, the thermal insulation layer adopts the thermal insulation design after temperature field simulation, 3 layers of nanofiber boards are combined with other thermal insulation boards, and the shell temperature is below 65 degrees.
4. Good stability. Through the structure design of the box and the matching of the corresponding ventilation volume and the rotor speed, it is ensured that the molten aluminum enters the box and is always subject to degassing; Gas efficiency is high and stable.
5. The material of the box has a long service life, and the inner lining of the box is relatively critical. Our company has developed materials suitable for high-purity aluminum to avoid the pollution of the aluminum liquid. Moreover, the lining material of the box is resistant to corrosion and has a long service life. The market feedback has an average service life. over 3 years.
6. Professional in after-sales technology. The company specializes in the production and development of aluminum melt purification materials and equipment. It is more professional in the application of equipment on site, and can design according to customer site conditions to ensure more convenient and reasonable operation.


    





Company Information


ceramic foam filter


AdTech produces materials and provides service for high temperature filtration and purification with strong technical strengh and managment system.AdTech was founded in 2012, and the China plant has been put into production by the end of 2013. AdTech is an international enterprise concentrating on R & D and manufacturing online degassing and filtrating equipment, ceramic foam filter, hot-top casting materials, nozzle board, repair coating material and fluxAdTech products are mainly used in aluminum casting which in order to isolate and adsorb impurities and also back-flow protection.AdTech China factory has acquired the ISO 9001,ISO 14001,CEand SGS. 


AdTech serves customers from dozens of countries and regions including Europe(Hydro/Rusal),Middle East(Aluminum Bahrain,Dubai Aluminum,Midal Cables,EGA),Southeast Asia(Press Metal,GVA,Jindal),China(Chinese Aluminum Industry,Zhongwang China, Weiqiao,Midas),ect.


2(2).jpg


 





Packaging & Shipping


1810 





Our Services


 





FAQ


1. Q: Are you a factory or trading company?
A: We are a factory that was founded in 2012.


2. Q: What are your main products?
A: We are making Online degassing, Filtrating equipment, Ceramic foam filter, Hot-top casting materials, Nozzle board, Repair coating materials, and Flux overseas for many years.


3. Q: How can you control your quality? 
A: For each production processing, we have a complete chemical composition and physical properties QC system. After production, all the goods will be tested, and we will have the quality certificates with ISO9001/ISO14001/SGS.


4. Q: What's the payment term that you can accept?
A: We can accetp T/T,  L/C,  Western Union, Cash etc.


5. Q: How can I get samples?
A: We are honored to offer you the samples.


6. Q: Does your company accept customization?
A: We accept OEM service.


7. Q: Can we visit your company?
A: Yes, you are welcome to visit our company.




0.1369 s.