Share on:
Chamber size | Customized |
Temperature range | -70℃~+150℃ |
Humidity range | 20%RH~98%RH |
Temp. Humi. fluctuation | ±0.3℃; ±0.5%RH |
Temp. Humi. Uniformity | ±2℃; ±3%RH (empty loading after stable for 30min) |
Indication resolution | 0.01℃; 0.01%RH |
Heat up & Cool down time | heat up: average 3℃/min; Cool down: average 1℃/min |
Inner chamber material | SUS#304 Stainless steel |
Exterior chamber material | Cold rolled plate + Powder coating |
Insulation material | PU |
Air Circulation system | Centrifugal fan air circulation system |
Heating system | SUS#Stainless steel high-speed heater |
Humidification system | Electrothermal steam humidification |
Dehumidifying system | ADP critical dew point cooling/dehumidifying method |
Refrigeration system | Compressor + finned evaporator + air(water)cooling condenser |
Controlling system | Touch Screen Controller |
Other components | vacuum glass observation window |
Test hole (50mm) | |
Control status indicator | |
View light | |
Compartment shelf (2 freely adjustable) | |
Safety protection device | Over-heat protection circuit breaker; Humidifying system overload protection; Compressor overload protection; Control system overload protection; Overload indicator; Phase sequence protection; Water shortage protection; High voltage and low voltage protection; Over temperature protection; Water supply delay protection; Fan overcurrent protection; |
Power supply | AC 1 phase 220V; 3 phase 380V 60/50Hz |
Customization service | Non-standard or special requirements are all welcome |