Chicken Farm Small birds Plastic Injection Water Drinker mould

1.Before production

Clear the dust, oil and rust of the Water Drinker mould, and remove the dirty on the surface before installing the mould into injection molding machine.

Use air gun or rag, detergent or alcohol to clean the oil on the mould surface.

Check the mold's cooling channel to ensure smooth water passage.

Check whether the arc on the mould gate sleeve is damaged, and whether there are any remaining foreign matter. If necessary, clean it up.

Moving parts: such as thimbles, springs, hydraulic cylinders, sliders. Check whether there is rust, bending, or fracture, and make sure the movement must be smooth.

2.During production

The moulds produced on the machine are inspected and maintained daily.

Check the Water Drinker mould guide post, guide sleeve, and sliders for damage and foreign matter on them, and refuel them once a day.

Clean the mould parting surface and the foreign matter in the exhaust groove, oil stains, and wipe it with air gun or rag, detergent or alcohol once a day.

3.After production

Inspect each part of the mold to see if there is any damage.

Clean the greasy dirt on the parting surface and the debris in the mold cavity, and spray with anti-rust agent.

Blow off the water remaining in the cooling water channel.

4.Precaution

Always wear labor protection supplies when maintaining the mould. Heavy objects must be operated with a crane. It is strictly forbidden to lift the mould directly by hand to prevent inquiry to the limb.

The rust prevention of the mold is necessary. After the mould is maintained, special attention should be paid to the rust prevention action of the mould. The remaining water in the water channel must be dried with an air gun.

Too much lubricating oil does not bring better lubricating effect, just the right amount.

When the mould is installed and maintained, pay attention to numbers and directions of the inserts and other components. Do not install them incorrectly. Check whether the screws are completely used up and tighten them diagonally when installing the screws.

Why choose us? The Advantage of Aoxu Mould:

1. For Water Drinker mould: Good Quality, Long life, repair free if technology problem.

2. For Service: Prompt response within 24 hours, short delivery time.

3. For Price: Best or Reasonable price.

Our after-sale service

1.During Water Drinker mould Manufacturing, we will offer update mould picture or video to customer every week .

2.When mould test, we will send video and photos.

3.Before delivery, packing video and photos(wooden case, painted with antirust) will be both offered for customers.

4.If mould stay in our factory to production ,life warranty.