Share on (1600725637812):

Model | Smart Case |
Appearance | Size:18*3*6.7 cm |
Customizable color | |
The case needs to drill additional screw holes, which is suitable for opening the case up and down. | |
Material | Shell: ABS+PC |
The force-bearing parts: Metal | |
Charging Port | DC 5.5 Port (DC 5V/2A) |
Communication Module | Support GPRS communication(Four frequency bands 850/900/1800/1900MHZ),AES256 encrypted transmission is supported between the platform and the device. |
Support SMS text message emergency unlock. | |
Communication Method | Support non-contact 13.56M encryption IC card unlocking operation. Support BLE 4.0 unlock operation; (Support AES128 encryption) |
GPRS terminal TCP protocol, the platform supports real-time tracking and recording of the case switch status, position, and remote control. | |
Position | Using GPS + Beidou, accurate within 10 meters, with base station positioning function. |
Alarm | Low battery alarm |
With tamper detection function, the generated alarm information is saved in the lock and immediately sent to the background via GPRS. | |
Under the condition of no hardware failure, the alarm information omission rate (including omission and misrecording) < 0.01%. | |
Strength | It can resist the collision and vibration that may occur in daily use. |
Battery | Ordinary lithium battery 6400mAh, low temperature lithium battery 5200mAh |
Ordinary lithium battery endurance > 7 days (report positioning information to the background every 3 minutes); | |
When the power is less than 10%, the chip data and lock state will be saved, and enter a deep sleep state. You can unseal and unlock the case when you reach the destination by turning the box upside down without the power bank charging. | |
Storage | Built-in 2M Flash, can store >8000 pieces of blind spot data. |
Operating Environment | Working temperature: -20°C to 80°C for ordinary batteries, -30°C to 80°C for low temperature batteries. |
Storage temperature: Store at ambient temperature from -40°C to 80°C; | |
The lock is installed inside the case, and the waterproof needs to rely on the case itself. | |
Humidity: 95% non-condensing humidity test environment, the equipment will not be damaged. | |
Mechanical vibration: Half-period sine wave 30g acceleration vibration lasts for 11 milliseconds. Under the test environment, the equipment is guaranteed to be free from damage, which conforms to the method specified in IEC60068-2-2; | |
Electromagnetic field: the safety smart lock can ensure the integrity of data and the equipment is not damaged under the high magnetic field strength of 50V/m for 60 seconds; the safety smart lock can withstand 25 kV electrostatic discharge test and ensure the integrity of data and equipment are not damaged. |



New products from manufacturers at wholesale prices