Non pollution High Efficient Waste Plastic Recycling Line With High Yield
- Category: >>>
- Supplier: Shangqiu Yueda Environmental Technology Ltd.
Share on (1600730867577):
Product Overview
Description
NO. | Model | Capacity | Note |
1 | YD-2200*6000 | 5 TPD | Feeding packed plastic |
2 | YD-2200*6600 | 6 TPD | Feeding packed plastic |
3 | YD-2600*6000 | 8 TPD | Feeding packed plastic |
4 | YD-2600*6600 | 9 TPD | Feeding packed plastic |
5 | YD-2800*6000 | 10 TPD | Feeding packed plastic |
6 | YD-2800*6600 | 12 TPD | Feeding packed plastic |
7 | YD-2800*7500 | 15 TPD | Feeding packed plastic |
8 | YD-2800*8000 | 17 TPD | Feeding packed plastic |
Item | Approach |
Waste water | During the working process of the pyrolysis machine , water is needed to cool gas(oil gas) to liquid(oil) , and the cooling water is recycled. No losses and no waste water generation if evaporation is ignored |
Waste smoke | All smoke and dust generated by fuel heating during the pyrolysis process of the machine is discharged after reaching the standard after entering the professional industrial purification device through the flue extraction system. |
Waste slag | Also named carbon black, it has a very wide range of uses, and can be used as a filler for various products such as rubber products, cable sheaths, and tires. |
1. Cooling system:
New cooling system ensure you can get much and higher quality pyrolysis oil.
2. Wax remove system:
This system is very important , It can remove wax oil from the plastic, prevent wax oil entering the cooling system and blocking the pipes.
3. Dust remove system:
New type dust remove system ensure the machine output smoking is eco-friendly.
4. Auto feeding system:
Use auto feeder loading tyres into reactor not only greatly save time and labors but also loading more plastic.
5. Auto discharge system:
Ensure no any dust when discharge carbon black, And discharge time greatly shortage.
6. Reactor thickness:
The reactor thickness is 16mm or 18mm , It can improve reactor use life time, and ensure reactor no deformation when high temperature heating.
7. Waste gas burnning system:
The non-condensable C1-C4 oil gas can be through this system reback to furnace for burnning, Not only no need emission but also can save fuel.
New cooling system ensure you can get much and higher quality pyrolysis oil.
2. Wax remove system:
This system is very important , It can remove wax oil from the plastic, prevent wax oil entering the cooling system and blocking the pipes.
3. Dust remove system:
New type dust remove system ensure the machine output smoking is eco-friendly.
4. Auto feeding system:
Use auto feeder loading tyres into reactor not only greatly save time and labors but also loading more plastic.
5. Auto discharge system:
Ensure no any dust when discharge carbon black, And discharge time greatly shortage.
6. Reactor thickness:
The reactor thickness is 16mm or 18mm , It can improve reactor use life time, and ensure reactor no deformation when high temperature heating.
7. Waste gas burnning system:
The non-condensable C1-C4 oil gas can be through this system reback to furnace for burnning, Not only no need emission but also can save fuel.
Q1: What is the usage of pyrolysis oil ?
It is good quality furnace oil, used as heating oil. Can be used for large boilers, like iron and steel plant, bricks factory,
cement factory,glass plant and etc.
Q2: What's the fuel of pyrolysis plant?
The fuel can be coal, charcoal, firewood, fuel oil, heavy oil and natural gas
Q3: What's the covering area of one set of 5-10 ton capacity pyrolysis plant?
1 set machine covers 300 square meters(L*W=30*10m ). Besides raw material and end products storage areas,you also need to prepare workers' resting room and simple office, Totally 600-800 square meters land will be better.
Q4: How many workers operate machine?
3-4 workers are enough for 1 set pyrolysis machine, If use auto-feeder ,2 workers will be ok.
Q5: How about the installation?
We will provide the foundation drawings to you once confirm order, we also send technical engineer to you for guiding the
installation, the commissioning and workers training.
Q6: How long the devliery time ?
20-25days after confirm order.
It is good quality furnace oil, used as heating oil. Can be used for large boilers, like iron and steel plant, bricks factory,
cement factory,glass plant and etc.
Q2: What's the fuel of pyrolysis plant?
The fuel can be coal, charcoal, firewood, fuel oil, heavy oil and natural gas
Q3: What's the covering area of one set of 5-10 ton capacity pyrolysis plant?
1 set machine covers 300 square meters(L*W=30*10m ). Besides raw material and end products storage areas,you also need to prepare workers' resting room and simple office, Totally 600-800 square meters land will be better.
Q4: How many workers operate machine?
3-4 workers are enough for 1 set pyrolysis machine, If use auto-feeder ,2 workers will be ok.
Q5: How about the installation?
We will provide the foundation drawings to you once confirm order, we also send technical engineer to you for guiding the
installation, the commissioning and workers training.
Q6: How long the devliery time ?
20-25days after confirm order.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
