ZETIN High Quality Sintering Oven Industrial Oven Factory Brick Lab Muffle Furnace
- Category: >>>
- Supplier: Zhengzhou Zetin Electromechanical Equipment Co. Ltd.
Share on (1600732536735):
Product Overview
Description
Product Overview
ZTCF-30B mini
In comparison Zetin ZTCF-30B mini is relatively small and light, its internal chamber used compact design, meanwhile it was designed with special security lock which is effectually prevent of sintering fail because of someone open its door during sintering phase.
Zetin ZTCF-30B mini configuration with 7inch color touchscreen which makes the operation more simple, its heating element use the high pure silicon molybdenum which is specificaly design for dental, and use of dual platinum and rhodium （type B）thermocouples has a long service life, basically no maintenance, and worry-free.
Zetin ZTCF-30B mini can set 40 program and it has been set 1 general sintering program, don’t change the general program, you can use the rest program to set whatever you need program.
Our Advantages
Max.Temperature | 1730℃ |
Temperature control accuracy | ±1℃ |
Touch screen | 7"TFT |
Power Output | 3KW |
Electrical connected value | 220V 50/60HZ ＆ 110V 50/60HZ |
Heating element | High purity heater specially for dentistry |
Sensor | Type B |
Capacity | Ø110mm×120mm |
Conventional sintering program | No.1 |
Cleaning program | No.40 |
Program | Stored 40 programs ,with power-off memory function |
Size (L*W*H) | 450× 500×850 mm3 |
Net weight | 60 KG |
▪ T-max 1730 °C
▪ High-quality heating elements made of Silicon molybdenum rods which offer very good protection to against chemical interaction between charge and heating elements
▪ Good looking appearance, Double-layer painted high temperature resistance housing
▪ Only use the not be classified into carcinogenic fiber materials
▪ PID intelligent temperature controller ensure the actually temperature error within +/-1.
▪ Using German insulation materials, it has good insulation effect and no pollution, which can keep the temperature in a balanced state and is also environmentally friendly and energy-saving
▪ Drying function: When the program start the table will go into the furnace chamber and automatically enter in dry model and the chamber temperature will raise up to about at 500 °C
▪ Type B thermocouple
▪ Controller system can memory 40 programs, even accident happen and cause the machine power off, once you return on it，you can continue operating it from any phase and any point of you need.
▪ High-quality heating elements made of Silicon molybdenum rods which offer very good protection to against chemical interaction between charge and heating elements
▪ Good looking appearance, Double-layer painted high temperature resistance housing
▪ Only use the not be classified into carcinogenic fiber materials
▪ PID intelligent temperature controller ensure the actually temperature error within +/-1.
▪ Using German insulation materials, it has good insulation effect and no pollution, which can keep the temperature in a balanced state and is also environmentally friendly and energy-saving
▪ Drying function: When the program start the table will go into the furnace chamber and automatically enter in dry model and the chamber temperature will raise up to about at 500 °C
▪ Type B thermocouple
▪ Controller system can memory 40 programs, even accident happen and cause the machine power off, once you return on it，you can continue operating it from any phase and any point of you need.
Specification
Model | Tmax | Inner dimensions in mm | Maximum | Outer dimensions in mm1 | Outer dimensions in mm1 | Connected | Weight | |||||||||||
ZTCF-30B | °C | Ø | units | W | D | H | load kW | in kg | ||||||||||
mini | 1730 | 110 | 120 | 50 | 450 | 500 | 850 | 3 | 60 | |||||||||
*These furnaces are available for main voltage of 220 V 50/60H or 110 V 50/60HZ | ||||||||||||||||||
Packaging & Shipping
Company Profile
Recommend Products
Dental porcelain furnace applies auto lift and down tray with non-oil vacuum pump design which almost don’t need maintain and less
noise, it is suitable for all kinds of ceramic powder materials, such as IVOCLAR, VITA, NORITAKE etc, it configure with long
lifetime and zero pollution Swedish Kanthal heating wires and U.S. accurate vacuum measurement sensor.
noise, it is suitable for all kinds of ceramic powder materials, such as IVOCLAR, VITA, NORITAKE etc, it configure with long
lifetime and zero pollution Swedish Kanthal heating wires and U.S. accurate vacuum measurement sensor.
Zetin Chairside speed sintering furnace is specially design for office use，Its particular advantage is the short processing time,
which significantly improve the fabrication time of zirconium oxide crown and bridge frameworks as well as the energy consumption.
which significantly improve the fabrication time of zirconium oxide crown and bridge frameworks as well as the energy consumption.
Zetin ZTCF-30B Plus has a large furnace chamber and the temperature could raise up to 1730 °C. For sintering translucent zirconia the high-temperature bottom loading furnace shows prefect performance, and the motor-driven lifting tray is easy to control. The all-around cylindrical heating chamber ensures a outstanding temperature uniformity.
SALES AND SERVICE NETWORK
FAQ
Q:Are you a factory?
A:Yes. Zetin is a factory and it integrates design,manufactures and sales for several years.
Q:What about the delivery time？
A:Generally,the order will be deliveried within 15 days after receiving the payment or based,and also have to depend on the
quantity and production schedule.
Q:Which shipment is available?
A:Ses,train,air,truck and express(DHL TNT EMS Fedex UPS) ect...Accroding to the situation and the requires.
Q:What about the warranty period?
A:The warranty period is 1 year.
A:Yes. Zetin is a factory and it integrates design,manufactures and sales for several years.
Q:What about the delivery time？
A:Generally,the order will be deliveried within 15 days after receiving the payment or based,and also have to depend on the
quantity and production schedule.
Q:Which shipment is available?
A:Ses,train,air,truck and express(DHL TNT EMS Fedex UPS) ect...Accroding to the situation and the requires.
Q:What about the warranty period?
A:The warranty period is 1 year.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
