Magnesium Oxide magnesia ceramic Tube MgO core rod for Heaters 2 hole Dia11mm length200mm
- Category: >>>
- Supplier: Hoyue Technology (lianyungang) Co. Ltd.
Share on (1600736304262):
Product Overview
Description
Product Description
We use high pure fused magnesia as raw material,made by high-pressure automatic extrusion and fired in a 1700-degree tunnel pushing plate cellar furnace with high density (2.3g /ml). The level of its insulation and withstand voltage products has been continuously improved.
Currently we can produce various kinds of single-hole, double-hole, four-hole, five-hole, six-hole, eight-hole, and nine-hole
porous magnesium oxide tubes with an outer diameter of 2.0mm-25mm,and we can also produce according to customer requirements.
Use: armored wire, armored heater.
porous magnesium oxide tubes with an outer diameter of 2.0mm-25mm,and we can also produce according to customer requirements.
Use: armored wire, armored heater.
Specification
Magnesium oxide MgO ceramic rod
Features :
1. High temperature capability.
2. Low electrical conductivity.
3. High thermal conductivity.
4. Good corrosion resistance.
5. Infrared transparent
You May Like
Packing & Delivery
Our Service
Company Profile
Hoyue technology is one of the manufacturers and suppliers of high-quality quartz glass and precision ceramics in China.
Our products include ceramic rods, ceramic tubes, ceramic plates, ceramic sheets, ceramic blocks, ceramic nozzles, ceramic plungers,ceramic washers,ceramic pacers, ceramic substrates and precision parts for industrial, quartz tube, quartz plate,cuvette, silicon wafer. We have all-line high precision equipment from ceramic forming, sintering to precision machining. Hope fora wide range of sincere cooperation with customers at domestic and abroad.
Our products include ceramic rods, ceramic tubes, ceramic plates, ceramic sheets, ceramic blocks, ceramic nozzles, ceramic plungers,ceramic washers,ceramic pacers, ceramic substrates and precision parts for industrial, quartz tube, quartz plate,cuvette, silicon wafer. We have all-line high precision equipment from ceramic forming, sintering to precision machining. Hope fora wide range of sincere cooperation with customers at domestic and abroad.
FAQ
Q: What's your samples policy?
We can provide some free samples if we have the similar products in stock, but customer needs to pay the freight cost.
Q: Do you accept customized dimension?
Yes, we can produce ceramic parts per customer's request.
Q:How to get the price?
You can provide drawings with performance requirment or samples to us for quotation, we will send price to you once received
your drawings or samples within 24 hours.
Q: Do you accept customized dimension?
Yes, we can produce ceramic parts per customer's request.
Q:How to get the price?
You can provide drawings with performance requirment or samples to us for quotation, we will send price to you once received
your drawings or samples within 24 hours.
Q: How to deal with the faulty?
Our products are produced in strict quality control system and the defective rate will be less than 0.2%.If the products you
received is not the same as drawings, we will arrange re-production.
If you only have samples, you can also send us.
received is not the same as drawings, we will arrange re-production.
If you only have samples, you can also send us.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
