Zetron FG 10 High Concentration Curtain Water Cleanroom Fogger

Share on (1600740056088):


Price:$1,450.00 - $1,500.00

Quantity:


Product Overview

Description





overview


Y09-010 Pure Water Fogger
Y09-010 is economical and practical type pure water fogger. It uses ultrasonic atomization principle, atomizing pure water into a lot of mist around 10 microns. Under external pressure, it is piped out through smoke exhaust pipe, it can exhibit thick smoke, it is very intuitive to visualize the airflow state in a number of industries, especially in the clean room industry.




Operation


➢ Keep the water tank clean.
➢ Please ensure that the added liquid is purified water.
Otherwise, it will affect the useful life of the product. It is strictly forbidden to add oily media.
➢ Make sure the power supply is at the correct rated voltage before use.
➢ The chassis should be placed horizontally and should not be tilted or flipped.
➢ After use, turn off the power or unplug the plug and drain the remaining pure water.
➢ The amount of water should be added to the red line.
Too much or too little water will affect the concentration of fog.
➢ The control circuit board should not be in contact with water to prevent short circuit
➢ Pay attention that the fan can not touch the water to prevent short circuit
➢ The water temperature in the water tank should not be higher than 50 °C.
➢ Avoid placing the fogger beside the electronic equipment to prevent the electrical equipment be damaged by the water mist. ➢ Please leave it in a dry place after use.
Instruction:
➢ Place the funnel in the hole,
➢ Add purified water to a 2L cup. When adding water, please pay attention to the water level. The HI red line is the best (about 2 cups of water).
➢ When the warning water level is exceeded, the water level alarm light lights up and an alarm sound is emitted.
At this time, please discharge excess water and the alarm can be eliminated.
Note: There is a test button behind the alarm. If the test does not sound, please replace two batteries.
➢ Connect the fuming bellows to the fog hole of the chassis.
➢ Insert the power adapter into the power socket first.
➢ The power-on indicator lights up.
➢ The fog knob adjusts the amount of fog generated. If it is used in a small range, it is recommended to adjust it within the range of “1”.
➢ Please drain the water in the tank after use. In case of long-term storage, it will cause dirt and affect the service life of the fogger.



Product Parameter


Voltage
AC 220V or DC48V
Power
250W
Best capacity of inner water tank
3.6 liters
Main unit size
310 × 209 × 210 mm
Net weight
8 Kg
Amount of fog
≥1700ml/h
Atomized particle size
1-10 microns


Recommend Products




Why Choose Us


We have almost 10 years experience in the retail, import and export of gas detection and monitoring equipment.
This experience has enabled us to form an organization based on knowledge and expertise and have allowed us to supply a range of gas detectors and monitors that are tailored to our customers needs and budgets.

Our aim is to provide the best values products with high quality and style.To provide the new affordable and complete service for gas detection needs for the industrial, engineering and shipping market and our friendly staff are here to help with advice and prices.

So far, we have customers/buyers from over 20 countries/regions like Bulgaria, Brazil, Canada, China, Colombia,Germany,Iraq,Japan,Philippines, Russian Federation, Singapore, Taiwan, Thailand, Uruguay, United States, Ukraine, Vietnam, etc.
The list of countries still expanding.....


FAQ






0.1949 s.