Low temperature aluminum wire cored aluminum welding strip without aluminum welding powder Flux Cored Welding Wire
- Category: >>>
- Supplier: Hebei Fuhuide Wear-Resistant Material Co. Ltd.
Share on (1600750610045):
Product Overview
Description
Product Description
description:
Low-temperature aluminum flux-cored welding wire can weld almost all white metals, including aluminum, aluminum alloy, aluminum magnesium alloy and dissimilar welding between the above metals. It can even repair white metals that have been seriously corroded or polluted by oil, and even aluminum alloys that are considered irrerepair. Suitable for primary welding operator all-round welding, only need a small heating device, welding weld strength is generally higher than the strength of the base metal itself, know how to gas welding operation.
Operation procedure
One step:
Sanding the surface through physical cleaning.
Two steps:
Two steps:
heating the surface of the base material at the welding place, until the temperature reaches the working temperature of the welding wire 380℃-400℃, so that the welding wire can be formed by the heat conduction of the base material. Do not burn the welding wire with flame, and only when the surface temperature of the base material is enough, the welding wire can flow and penetrate to the capillary of the metal well.
Three steps:
When the repair is relatively thin aluminum, as long as the aluminum base material heated to the appropriate working temperature, and then the welding wire back and forth friction melting to form a weld, only with a metal brush molten wire filled in the welding to form a weld.
Four steps:
Small parts with propane gas welding, large parts with industrial gas or induction heating device heating welding, natural slow cooling after welding
Three steps:
When the repair is relatively thin aluminum, as long as the aluminum base material heated to the appropriate working temperature, and then the welding wire back and forth friction melting to form a weld, only with a metal brush molten wire filled in the welding to form a weld.
Four steps:
Small parts with propane gas welding, large parts with industrial gas or induction heating device heating welding, natural slow cooling after welding
Matters needing attention:
The thicker the piece is, the more troublesome it is to heat it, so it is crucial to use a reasonable heat source, as long as the surface temperature of the base metal reaches the welding wire.
Working temperature, you can implement welding, the use of oxy-acetylene welding when the neutral flame welding, but do not directly use fire welding wire.Applicable heat source: can be used for many kinds of heat sources, such as propane, oxyacetylene, etc
Working temperature, you can implement welding, the use of oxy-acetylene welding when the neutral flame welding, but do not directly use fire welding wire.Applicable heat source: can be used for many kinds of heat sources, such as propane, oxyacetylene, etc
Operational attention detail:
1. The surface of the base metal must be cleaned. Clean and weld immediately
2, the temperature of the base metal must reach 400℃, including the temperature of the base metal in the process of welding must be maintained at 400℃, and the temperature can be high or low.
3. Avoid deliberately burning the welding wire with flame. After the temperature of the base metal reaches 400℃, the welding wire will naturally melt by heat conduction of the base metal.
2, the temperature of the base metal must reach 400℃, including the temperature of the base metal in the process of welding must be maintained at 400℃, and the temperature can be high or low.
3. Avoid deliberately burning the welding wire with flame. After the temperature of the base metal reaches 400℃, the welding wire will naturally melt by heat conduction of the base metal.
Company introduction
Our product production technology is advanced, with domestic first-class inert gas protection continuous casting production line, vertical, horizontal hot extrusion, connecting, connecting, polishing production equipment, ultrasonic cleaning and other production lines and complete testing equipment. Good product quality, domestic and foreign users praise!
The company's goal: the pursuit of excellence, based on users, dedicated to the new and old customer service.
Main categories: (cobalt base, nickel base, silver base, aluminum alloy, copper alloy, stainless steel, wear-resistant, carbon steel, low alloy steel, high strength steel, heat resistant steel) and other wire welding powder electrode.
The company's goal: the pursuit of excellence, based on users, dedicated to the new and old customer service.
Main categories: (cobalt base, nickel base, silver base, aluminum alloy, copper alloy, stainless steel, wear-resistant, carbon steel, low alloy steel, high strength steel, heat resistant steel) and other wire welding powder electrode.
FAQ
1.Best price offer
sincerely hope build up a long term cooperation relationship,offer you the most competitive price
2.On-time delivery
Time is gold,once order confirm,we arrange it ASAP by air or train or ship
3.Strict quality control
we arrange technicans to inspect products at random time,which promise superior quality
4 Accept OEM packing
you can send us your sample package
5.Smaple free
6.The most comprehensive and the most attentive service
we have a professional team to solve all problems
FAQ
Q: are your trading company or manufacturer?
A:we are factory
Q:how long is your delivery time:
A:Generally it's 7-15 days if the goods are in stock,or it's 15-20days if goods are not in stock,it depends on quantity.
Q:Do you provide free sample?it's free or extra?
A:yes,we offer free sample,but don't pay the cost of freight.
Q:what is your payment term?
A:payment<=1000usd,100% in advance.payment>1000usd ,30%TT in advance,balance before shippment.
If you have another question, pls feel free to contact us as below:
sincerely hope build up a long term cooperation relationship,offer you the most competitive price
2.On-time delivery
Time is gold,once order confirm,we arrange it ASAP by air or train or ship
3.Strict quality control
we arrange technicans to inspect products at random time,which promise superior quality
4 Accept OEM packing
you can send us your sample package
5.Smaple free
6.The most comprehensive and the most attentive service
we have a professional team to solve all problems
FAQ
Q: are your trading company or manufacturer?
A:we are factory
Q:how long is your delivery time:
A:Generally it's 7-15 days if the goods are in stock,or it's 15-20days if goods are not in stock,it depends on quantity.
Q:Do you provide free sample?it's free or extra?
A:yes,we offer free sample,but don't pay the cost of freight.
Q:what is your payment term?
A:payment<=1000usd,100% in advance.payment>1000usd ,30%TT in advance,balance before shippment.
If you have another question, pls feel free to contact us as below:
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
