DAPHNE 32# 18L Heat Transfer Oil Of Industrial Lubricant Grease Hot Oil for Electronics Production Machinery

Product Overview

Description

High temperature synthetic heat conduction oil MF800
  Synthetic high temperature gas-liquid heat conduction oil, high temperature long life, heating heat conduction oil from 18ºF to 750ºF (12ºC to 400ºC) under the operation, with low pressure characteristics; MF800 thermal oil is a eutectic mixture of 73.5% diphenyl ether and 26.5% biphenyl. It can be used as a liquid heat transfer medium or as a heat transfer medium for the evaporative (condensed gas-liquid two-phase) cycle up to 750 ° F (400 ° C). Liquid/gaseous heat transfer fluids for applications requiring high temperature. Used in chemical refining, chemical fiber, petroleum installations, waste heat treatment, chemical treatment, gas treatment, petrochemical plants and many other applications.

 

Items	Typical Data
Model	BDM series	BD series	BDH series
Appearance	Yellow	Yellow	Yellow
Base Oil	Mineral Oil	Synthetic Oil	Synthetic Oil
Kinematic viscosity  (40℃)mm2/S)	22-100	22-100	22-100
Flash point (opening),℃	150	215	250
Pour point℃	-40	-40	-40
Density	0.91

 

FAQ

Q1 How to choose the right lubricant?
*According to the requirements of the owner's manual, select according to the AP and SAE levels.
*Compared with mineral oil, synthetic oil has more stable performance, can extend oil change period, and save fuel. It should be used as much as possible.
*The SN level is higher than the SM level and has better wear resistance. It should be used as much as possible.

Q2 The quality of the oil is good or bad, Look at the API indicators. What is the classification of the API indicators?
There are two main types of engines, namely gasoline engines and diesel engines. The API also regulates engine oil into two categories. The gasoline engine oil API quality level starts with S, while the diesel engine starts with C. The quality level is in alphabetical order, and the higher the letter, the higher the level.
Gasoline engine oil API level: SA, SB, SC, SD, SE, SF, SG, SHSJ, SL, SM, SN
Diesel engine oil API level: CA, CB, CC, CD, CE, CF, CF-4, CG-4, CH-4, CI-4

Q3 How to choose the right viscosity?
*The new car uses a lower viscosity, such as: 5W-30
*The old car uses high viscosity oil, such as: 15W-50
*When the temperature in the north is low, choose low viscosity, such as: 5W-30
*Generally, you can choose moderate viscosity, such as: 5W-40

Q4 My car doesn't drive in very harsh environments. Do you need such a good lubricant?
Most vehicles do not drive in harsh environments, but the use of high quality lubricants has become a consensus:
As new technologies continue to be applied to engines, the engine's operating conditions are becoming more stringent and thedemand for lubricants is increasing. High-quality grades of lubricants reduce engine wear, piston and piston ring deposits,providing full lubrication to the engine and extending engine life.

Q5 Do I need to flush the engine before replacing this product or other Oumali engine oil?
Not necessary at all. There is no need to make any special preparations when changing from conventional oil to this