water clear casting crafts polyester resin polyester casting resin

Product Overview

Description

 

Marine High Performance Gel Coats Properties

 

Marine gel coats are high performance coatings designed for the most demanding applications. These gel coats are used in high-end marine applications from high performance speed boats to luxury yachts. Our gel coats are also used successfully in architectural applications as well as fiberglass swimming pools.

Our gel coats are formulated with high performance polymers; fillers and light stabilizers for excellent UV resistance; color and gloss retention; water and blush resistance; and crack resistance. These gel coats have exceptional spray characteristics and sag resistance for ease of application and equipment set-up.

The gel coats meet MACT Standard EPA 40 CFR part 63 requirements of the National Emission Standards for Hazardous Air Pollutants: Reinforced Plastic Composite Production, maximum of 30% HAP for white or off white gel coat and National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing, Maximum of 33% HAP for pigmented gel coat.

 

Marine High Performance Gel Coats Specification

Specification		TC 36	Test Standard
Gelcoat	Viscosity 25℃ cp	1600-2600/3500-5500	GB7193.1-1987
	GelTime25℃ min	8~20	GB7193.6-1987
Base Resin
	Flexible Strength MPa	105	GB/T2570-1995
	Flexible Modulus GPa	3	GB/T2570-1995
	Tensile Strength MPa	68	GB/T2568-1995
	Tensile Modulus GPa	3.1	GB/T2568-1995
	Elongation %	2.6	GB/T2568-1995
	Impact Strength KJ/ m2	12	GB/T2571-1995
	Barcol Hardness	42	GB3854-83
	HDTX: ℃	75	GB1634-1979
Application	Cure-system	Cobalt type accelerator, MEKP
	Application	1.Temperature of workshop, raw materials and should be above 15℃ and relative humidity below 70% 2.Spraying or hand lay up
Note		1.There are transparence, white and other varied color, referred to our colour card 2.Colour gel coat is promoted

 

 

Marine High Performance Gel Coats package

 

 PACKAGE:20kg pails

 $TORAGE:maximum of 3 months under 25^C in shade

 TRANSPORTATION:according to the rule of dangerous good control and GB 190-90.

 

 

1. Q: Is your company a manufacturer?

     A: Yes,we are. At the same time, we are also agents of other product brands.

2. Q:  Does your company provide samples?

     A:  Yes,If you have a shipper in China ,sample will sent to him freely .

3. Q:How long could the resin be stored ?

     A: Normally , 90 days .but if promoted resin ,it's about 45 days .

4. Q: If I will get a better price with big QTY ?

    A: Of course , best price will be granted u as per QTY.