Color Flakes Blend Concrete Floor Coatings Decorative Paint Flakes for Garage Floor Paint Interior Wall
- Category: >>>
- Supplier: Jiangxi Tiansheng New Materials Co. Ltd.
Share on (1600764476086):
Product Overview
Description
Product Description
Acrylic Flake Usage: Acrylic Flake blends of the color of your choice. For use with
epoxy floor coatings, create a full or partial flake floor, or mix colors to suit your desired
look. Brightens or soften the environment by controlling the color and texture of the floor.
Physical characteristics: hard platelets, tasteless or slightly irritating odor.
Acrylic flake is a new type of materials used in interior that developed by our company.
It widely used in epoxy floor, unsaturated polyester, artificial stone counter-tops,
polyester sheet, acrylic sheet, aluminum panels, wood floor and water-based latex paint
and so on. Traditional floor single color, color effect monotonous, can not achieve
colorful effect. Our acrylic flake can show high-grade granite texture effect through
different colored acrylic flakes and simple process . Acrylic flake fully integrated with
resins, it make products surface colorful, show fashion charm, increase products added
value. Acrylic flakes construction easy, better quality, lower cost, natural color, it’s a new
composite material with multiple advantage, and it’s also indispensable raw materials for
above manufacturers.
epoxy floor coatings, create a full or partial flake floor, or mix colors to suit your desired
look. Brightens or soften the environment by controlling the color and texture of the floor.
Physical characteristics: hard platelets, tasteless or slightly irritating odor.
Acrylic flake is a new type of materials used in interior that developed by our company.
It widely used in epoxy floor, unsaturated polyester, artificial stone counter-tops,
polyester sheet, acrylic sheet, aluminum panels, wood floor and water-based latex paint
and so on. Traditional floor single color, color effect monotonous, can not achieve
colorful effect. Our acrylic flake can show high-grade granite texture effect through
different colored acrylic flakes and simple process . Acrylic flake fully integrated with
resins, it make products surface colorful, show fashion charm, increase products added
value. Acrylic flakes construction easy, better quality, lower cost, natural color, it’s a new
composite material with multiple advantage, and it’s also indispensable raw materials for
above manufacturers.
Color Chart
How to Use
Application Instructions:
Tips: Tools required for the thin colorful flakes wall painting are: roller, spray gun, air
Tips: Tools required for the thin colorful flakes wall painting are: roller, spray gun, air
compressor, paint brush and adhesive tape. Such tools are generally used and it can be
bought from every building materials shop or DIY store.
bought from every building materials shop or DIY store.
1. Wall paint
1.1. Steps
(1) Have emulsion varnish coated on the wall with your roller and repeat again after
drying. Then draw from the top of wall space at a size of 1.5m x 1.5m block (top
down order)
(2) Once every block fully painted, start to spray rock slice 15 cm away from the joint
with your spray gun at a distance of 50 cm from wall space.
(3) To have the joint coated with emulsion varnish again and spray rock slice accordingly.
(4) To finish execution of works by repeating above steps.
(5) After being completely dry, to clear the rock slice which is not entirely adhered by
using your paint brush.
(6) Painted with transparent finishing coat so as to protect surface.
1.1. Steps
(1) Have emulsion varnish coated on the wall with your roller and repeat again after
drying. Then draw from the top of wall space at a size of 1.5m x 1.5m block (top
down order)
(2) Once every block fully painted, start to spray rock slice 15 cm away from the joint
with your spray gun at a distance of 50 cm from wall space.
(3) To have the joint coated with emulsion varnish again and spray rock slice accordingly.
(4) To finish execution of works by repeating above steps.
(5) After being completely dry, to clear the rock slice which is not entirely adhered by
using your paint brush.
(6) Painted with transparent finishing coat so as to protect surface.
1.2. Size: 1-3mm, 1-5mm irregular flakes
1.3. Recommended dosage: 100g-250g/m2
1.4. Precaution:
(1) Please pave plastic cloth or paper for peeled rock slice recycling.
(2) To keep interface dry and clean. Free of grease, dirt, dust and protrusion. Moisture
content has to be below 10% for construction.
(3) Luxury indoor emulsion varnish is applicable.
1.3. Recommended dosage: 100g-250g/m2
1.4. Precaution:
(1) Please pave plastic cloth or paper for peeled rock slice recycling.
(2) To keep interface dry and clean. Free of grease, dirt, dust and protrusion. Moisture
content has to be below 10% for construction.
(3) Luxury indoor emulsion varnish is applicable.
2. Ground paint
2.1. Steps:
(1) When undercoat is dry, to spray floating coat in the roller at block size of 1.5mx1.5m
from the corner of inboard.
(2) To spray rock slice over the block one by one. Spray gun: to spray rock slice 15 cm
away from the joint with your spray gun at a distance of 50 cm from wall space.
Hand: to drip upslope for rock slice natural drop-down.
(3) To have the joint coated with emulsion varnish again and spray rock slice accordingly.
(4) To finish execution of works by repeating above steps.
(5) After the floating coat being completely dry, painted with transparent finishing coat
with roller brush for surface protection.
(1) When undercoat is dry, to spray floating coat in the roller at block size of 1.5mx1.5m
from the corner of inboard.
(2) To spray rock slice over the block one by one. Spray gun: to spray rock slice 15 cm
away from the joint with your spray gun at a distance of 50 cm from wall space.
Hand: to drip upslope for rock slice natural drop-down.
(3) To have the joint coated with emulsion varnish again and spray rock slice accordingly.
(4) To finish execution of works by repeating above steps.
(5) After the floating coat being completely dry, painted with transparent finishing coat
with roller brush for surface protection.
2.2. Size: 1-3mm, 1-5mm irregular flakes
2.3. Recommended dosage: 100g-250g/m2
2.4. Precaution:
(1)To keep interface dry and clean. Free of grease, dirt, dust and protrusion. To fill the
pit and crack. Moisture content has to be below 10% for construction.
(2) Floating coat, Finish, Undercoat: you can choose Epoxy resin (EPOXY) or
Polyurethane(PU) system.
(3)Fill the vessel with rock slice (approx. two thirds full), and put the straw of spray gun
into the vessel. Make its duct connected with air compressor (please use voltage regulator, pressure setting at 2~3kg/cm2)
2.3. Recommended dosage: 100g-250g/m2
2.4. Precaution:
(1)To keep interface dry and clean. Free of grease, dirt, dust and protrusion. To fill the
pit and crack. Moisture content has to be below 10% for construction.
(2) Floating coat, Finish, Undercoat: you can choose Epoxy resin (EPOXY) or
Polyurethane(PU) system.
(3)Fill the vessel with rock slice (approx. two thirds full), and put the straw of spray gun
into the vessel. Make its duct connected with air compressor (please use voltage regulator, pressure setting at 2~3kg/cm2)
Where to use
Considering they are available in infinite color combinations architects, designers, contractors, business owners, and homeowners alike, have taken flake floor systems way beyond the residential garage. Epoxy Color Flakes are now being used in:
* Automotive Facilities
* Bowling Alleys
* Catering Facilities
* Churches
* Class Rooms
* Commercial Kitchens
* Common Areas
* Daycares
* Dining area
* Doctors Offices
* Garage Floors
* Grocery Stores
* Hallways
* Homes
* Hospital
* Bowling Alleys
* Catering Facilities
* Churches
* Class Rooms
* Commercial Kitchens
* Common Areas
* Daycares
* Dining area
* Doctors Offices
* Garage Floors
* Grocery Stores
* Hallways
* Homes
* Hospital
* Kitchens
* Laboratories
* Laundromats
* Medical buildings
* Offices
* Patios
* Pool Decks
* Reception Areas
* Rental Property
* Restaurants
* Restrooms
* Retail Stores
* Schools
* Showrooms
* Warehouses
* Laboratories
* Laundromats
* Medical buildings
* Offices
* Patios
* Pool Decks
* Reception Areas
* Rental Property
* Restaurants
* Restrooms
* Retail Stores
* Schools
* Showrooms
* Warehouses
Specification
item | Flake Chips |
CAS No. | 9003-01-4 |
Other Names | Vinyl flakes |
MF | 123456 |
EINECS No. | 12345 |
Place of Origin | China |
Province | Jiangxi |
Main Raw Material | Acrylic |
Usage | Building Coating, Flooring, resin coating |
Application Method | Spary or boardcast |
State | Powder Coating |
Brand Name | TIS |
Model Number | QS-F4 |
Brand name | TIS |
Model NO. | QS-F4 |
Product name | Vinyl Chips |
Color | 30 single color, 12 Blends color |
Active ingredient | 99.8% |
Dosage | 15~30% |
Sample | Free |
MOQ | 200 |
Port | Shanghai |
Place of Origin | Jiangxi China (Mainland) |
Packing & Delivery
25kg per durm/ carton, 18 drums per pallet.
Company Profile
Jiangxi Tiansheng New Materials Co., Ltd was built in 2006, which located in a beautiful city JI'AN in Jiangxi Province China. It is a leading manufacturer of decorative granite flakes. The factory is more than 15,000 square meter, with advance equipment and rich-experience R&D team. Products are exported to all over the world with first class quality, which makes TIS have a good reputation worldwide.
Exhibition
FAQ
1. Who are we?
We are based in Jiangxi, China, start from 2013,sell to Domestic Market(25.00%),North America(25.00%),Eastern Europe(20.00%),South Asia(8.00%),Southeast Asia(8.00%),Southern Europe(7.00%),Oceania(3.00%),Africa(2.00%),South America(1.00%),Mid East(1.00%). There are total about 101-200 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production; always final Inspection before shipment.
3.What can you buy from us?
Manufacturing vinyl flake chips, granite flakes paint.
4. Why should you buy from us not from other suppliers?
We have a strong group of technology and perfect service system engaged in R&D and various additives.We has over ten senior engineers and forms strong ties with research institute for deep research work.We have complete R&D base and manufacturing base.
5. What services can we provide?
Accepted Delivery Terms: FOB, CIF, EXW, Express Delivery;
Accepted Payment Currency: USD, CNY, EUR and so on;
Accepted Payment Type: T/T,PayPal,Western Union;
Language Spoken:English,Chinese
We are based in Jiangxi, China, start from 2013,sell to Domestic Market(25.00%),North America(25.00%),Eastern Europe(20.00%),South Asia(8.00%),Southeast Asia(8.00%),Southern Europe(7.00%),Oceania(3.00%),Africa(2.00%),South America(1.00%),Mid East(1.00%). There are total about 101-200 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production; always final Inspection before shipment.
3.What can you buy from us?
Manufacturing vinyl flake chips, granite flakes paint.
4. Why should you buy from us not from other suppliers?
We have a strong group of technology and perfect service system engaged in R&D and various additives.We has over ten senior engineers and forms strong ties with research institute for deep research work.We have complete R&D base and manufacturing base.
5. What services can we provide?
Accepted Delivery Terms: FOB, CIF, EXW, Express Delivery;
Accepted Payment Currency: USD, CNY, EUR and so on;
Accepted Payment Type: T/T,PayPal,Western Union;
Language Spoken:English,Chinese
Customer Photos
PLS Contact Us
Una Liu
Company: Jiangxi Tiansheng
Company: Jiangxi Tiansheng
ADD: Post Code 343009, Indust rial North Road, Hedong Economic Development Zone, QingYuan District, JI'AN City,Jiangxi Province, China.
Tel: +86 18702665002
WhatsApp/ Wechat/ Skype:
+86 18702665002
Web: www.jx-tis.com
Tel: +86 18702665002
WhatsApp/ Wechat/ Skype:
+86 18702665002
Web: www.jx-tis.com
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
