long range metal detector 3d Image great depth underground gold Bounty hunter detector
- Category: Electronic Measuring Instruments >>>
- Supplier: Guangzhou,Kangjiale,Medical,Technology,Co.,Ltd.
Share on:
Product Overview
Description
Product Description
Product Features | ||
name | 3d metal detector | |
Depth of detection | 25m | |
Detection range | 1000m | |
How to use and detect:
It is necessary to turn on the power switch of both the receiver and the transmitter, and then select the metal category according to the gear on the receiver. For example, press the gold gear and the gold light of the transmitter is on at the same time, and then adjust the sensitivity control knob on the receiver to select the sensitivity. The higher the sensitivity, the larger the depth range, the maximum is 1000*30 meters. Adjust according to its own environment, and then put the elements to be detected on the head of the launcher for adaptation to facilitate more accurate detection. Gold and silver are adapted to the head of the launcher gun, and jade, gem and diamond are adapted to the head of the soft body. After adaptation, the launcher will make a sound, and then the detection can begin.
Because the instrument's hand-held handle rotates freely, the wind can interfere with the GR-100. So the instrument used in windy conditions will suffer from certain interference. The effectiveness of the device depends on how well the operator controls the scan.
Stand on the ground in a comfortable position, holding the instrument in your hands, with your elbows firmly against your sides. Note: You must have the instrument in front of your body, allow enough room for the receiving antenna to unfold, and tilt the antenna down slightly from the horizontal line. The Angle is somewhere between 7 and 10 degrees.
1. As mentioned above, hold the instrument and scan it very slowly in an arc while rotating yourself. The elbows should always be firmly against the sides of the body and should be turned about 40 to 60 degrees. Note: The dowser must rotate slowly and keep his body steady
2. Standardize your scanning actions. First, let the receiving antenna be stretched out properly. Keep the receiving antenna directly in front of you, spread out at 90 degrees from your body, and cannot be deflected left or right.
3, when the antenna is aligned with the target, the instrument will lock, although you cross the target to continue to detect. When you feel that the lock is valid, you remember this direction. Then, move the instrument about 10 meters to the left or right, and repeat the locking process. Look at the locking direction this time. The intersection of the two directions is where the object is buried.
4. If you feel that the specific position you just measured has a certain offset, you can lock it from another Angle. If the target is within 10 meters or so, walk slowly and steadily along one of the designated routes. When you pass the object and are directly above it, the antenna of the instrument swings to both sides. And that's when the location is very accurate
It is necessary to turn on the power switch of both the receiver and the transmitter, and then select the metal category according to the gear on the receiver. For example, press the gold gear and the gold light of the transmitter is on at the same time, and then adjust the sensitivity control knob on the receiver to select the sensitivity. The higher the sensitivity, the larger the depth range, the maximum is 1000*30 meters. Adjust according to its own environment, and then put the elements to be detected on the head of the launcher for adaptation to facilitate more accurate detection. Gold and silver are adapted to the head of the launcher gun, and jade, gem and diamond are adapted to the head of the soft body. After adaptation, the launcher will make a sound, and then the detection can begin.
Because the instrument's hand-held handle rotates freely, the wind can interfere with the GR-100. So the instrument used in windy conditions will suffer from certain interference. The effectiveness of the device depends on how well the operator controls the scan.
Stand on the ground in a comfortable position, holding the instrument in your hands, with your elbows firmly against your sides. Note: You must have the instrument in front of your body, allow enough room for the receiving antenna to unfold, and tilt the antenna down slightly from the horizontal line. The Angle is somewhere between 7 and 10 degrees.
1. As mentioned above, hold the instrument and scan it very slowly in an arc while rotating yourself. The elbows should always be firmly against the sides of the body and should be turned about 40 to 60 degrees. Note: The dowser must rotate slowly and keep his body steady
2. Standardize your scanning actions. First, let the receiving antenna be stretched out properly. Keep the receiving antenna directly in front of you, spread out at 90 degrees from your body, and cannot be deflected left or right.
3, when the antenna is aligned with the target, the instrument will lock, although you cross the target to continue to detect. When you feel that the lock is valid, you remember this direction. Then, move the instrument about 10 meters to the left or right, and repeat the locking process. Look at the locking direction this time. The intersection of the two directions is where the object is buried.
4. If you feel that the specific position you just measured has a certain offset, you can lock it from another Angle. If the target is within 10 meters or so, walk slowly and steadily along one of the designated routes. When you pass the object and are directly above it, the antenna of the instrument swings to both sides. And that's when the location is very accurate
Company Introduction
Guangzhou kangjiale Medical Technology Co., Ltd is established in November 2019. It is an innovative high-tech enterprise integrating design, research and development,
production, sales and service. It is located in Yunpu Industrial Zone, Huangpu District, with beautiful environment, convenient
transportation and fresh air. The company has more than 1,000 square meters of factory buildings, nearly 100 employees, senior
technology and excellent sales team, a number of modern production lines and advanced production equipment.
production, sales and service. It is located in Yunpu Industrial Zone, Huangpu District, with beautiful environment, convenient
transportation and fresh air. The company has more than 1,000 square meters of factory buildings, nearly 100 employees, senior
technology and excellent sales team, a number of modern production lines and advanced production equipment.
Related Products
FAQ
1. who are we?
We are based in Guangdong, China, start from 2019,sell to Oceania(16.00%),North America(15.00%),Central America(15.00%),Eastern Europe(14.00%),Domestic Market(11.00%),Southeast Asia(10.00%),Southern Europe(8.00%),Northern Europe(8.00%),Eastern Asia(6.00%),Western Europe(6.00%),South America(5.00%),Mid East(5.00%),Africa(3.00%),South Asia(1.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
METAL detector ,hygrometer
4. why should you buy from us not from other suppliers?
Guangzhou kangjiale Medical Technology Co., Ltd. is located in Guangzhou, a famous historical and cultural city in Guangdong Province, China. The production base is located in Guangzhou, Guangdong Province, a listed group and R & D and production high-
5. what services can we provide?
Accepted Delivery Terms: FOB,DDP；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,PayPal;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
We are based in Guangdong, China, start from 2019,sell to Oceania(16.00%),North America(15.00%),Central America(15.00%),Eastern Europe(14.00%),Domestic Market(11.00%),Southeast Asia(10.00%),Southern Europe(8.00%),Northern Europe(8.00%),Eastern Asia(6.00%),Western Europe(6.00%),South America(5.00%),Mid East(5.00%),Africa(3.00%),South Asia(1.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
METAL detector ,hygrometer
4. why should you buy from us not from other suppliers?
Guangzhou kangjiale Medical Technology Co., Ltd. is located in Guangzhou, a famous historical and cultural city in Guangdong Province, China. The production base is located in Guangzhou, Guangdong Province, a listed group and R & D and production high-
5. what services can we provide?
Accepted Delivery Terms: FOB,DDP；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,PayPal;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
We Recommend
ADMT-300S Groundwater detection machine 300m depth
US $68.00-$265.00
TFN FAT130 9KHZ-3GHZ Portable RF Spectrum Analyzer
US $3165-$3480