RO 888 Polyether Modified Silicone Oil Cas No.: 134180 76 0

Product Overview

Description

RO-888 Polyether Modified Silicone Oil Cas No.: 134180-76-0

RO-888 agricultural silicone adjuvant/silicone sticker /silicone additive/Wetting Agent/ spreading agent/penetrating agent  (Cas No.: 134180-76-0)   / organosilicone / trisiloxane alkoxylate / Polyether Modified Trisiloxane / Polyalkyleneoxide Modified Heptamethyltrisiloxane / coadyuvantes / silicone surfactant / polysiloxane / silicone polymer / Trisiloxane Modify / ethoxylated trisiloxane surfactant 

 

RO-888 Agricultural Silicone Spreading and Penetrating Agent  is a modified trisiloxane, and is an organic silicone surfactant with super ability of spreading. It makes the water surface tension lower down to the 20.5mN/m at the concentration of 0.1% (wt.). After the mixture with the pesticide solution at the certain proportion, it can lower the contact angel between the spray and foliage, which can enlarge the coverage of the spray. Furthermore, RO-888 Agricultural Silicone Spreading and Penetrating Agent can make the pesticide absorbed through the stomatal of leaves, which is extremely effective for improving efficacy, reducing amount of pesticide, saving cost, reducing environmental pollution caused by pesticides

FEATURES:

1.Super spreading and penetrating agent.

2.To reduce the dosage of agrochemical spraying agent.

3.To promote the rapid uptake of the agrochemical (tolerance to rainfall).

4. Non-ionic.

SPECIFICATIONS:

Item	Specification
Appearance	Colorless to light amber liquid
Viscosity, 25℃,mm2/s	30-60
Surface Tension, 25℃,mN/m	<20.5
Specific Gravity, 25℃, g/cm3	0.980-1.040
Cloud Point (1% wt,℃)	<10℃
Active Content	99.9%

 

 

 

HOW TO USE:

 

 Used of spray mixed in drum:

In general, add RO-888 (4000times) 5g in every 20kg spray. If it needs to promote the adsorption of systemic pesticide, increase the function of pesticide or reduce the amount of spray further, it should add the usage amount properly. In general, the amount is as follows:

 

 

 

Item	Standard
Plant promote regulator	0.025% to 0.05%
Herbicide	0.025% to 0.15%
Insecticide	0.025% to 0.1%
Fungicide	0.015% to 0.05%
Fertilizers and Micronutrients	0.015% to 0.1%

Note: use rates are dependent on crop, agrochemical and spray volume requirements.

 

Used of Original Pesticide:

When the product added to the original pesticide, we suggest the amount is 0.5%-8% of the original pesticide. Adjust the PH value of the pesticide prescription to 6-8. The user should adjust the amount of Agricultural Silicone Spreading and Penetrating Agent according to different kinds of pesticide and prescription to reach the most effective and most economical result. Do compatibility tests and stepwise tests before usage.