POM Plastic Particles Polyoxymethylene Plastic Raw Materials Recycled Plastic Materials POM for Mechanical Electronic Elements
- Category: >>>
- Supplier: Imaxle (shenzhen) Technology Co. Ltd.
Share on (1600770611405):
Product Overview
Description
POM Plastic Particles Polyoxymethylene Plastic Raw Materials Recycled Plastic Materials POM for Mechanical Electronic Elements
Plastic Particles
Ruiran is committed to research and development of plastic particles over 15 years. Our philosophy is to provide customers with high-quality product and best service.
We provide HDPE, LDPE, LLDPE, TPU, POM, PC, ABS, HIPS, PET, PVC, EVA, PP and many other kinds of plastic resign. Both raw and recycled plastic materials are supplied.
Customizable. Reliable. Affordable.
Free sample( 0-5 kg) is supported.
Warmly welcome your inquiry.
Product Display
Product Description
Polyoxymethylene (POM), also known as acetal, polyacetal, and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability. As with many other synthetic polymers, it is produced by different chemical firms with slightly different formulas and sold variously by such names as Delrin, Kocetal, Ultraform, Celcon, Ramtal, Duracon, Kepital, Polypenco, Tenac and Hostaform.
POM is characterized by its high strength, hardness and rigidity to −40 °C. POM is intrinsically opaque white because of its high crystalline composition but can be produced in a variety of colors. POM has a density of 1.410–1.420 g/cm3.
POM is characterized by its high strength, hardness and rigidity to −40 °C. POM is intrinsically opaque white because of its high crystalline composition but can be produced in a variety of colors. POM has a density of 1.410–1.420 g/cm3.
Typical applications for injection-molded POM include high-performance engineering components such as small gear wheels, eyeglass frames, ball bearings, ski bindings, fasteners, gun parts, knife handles, and lock systems. The material is widely used in the automotive and consumer electronics industry. POM's electrical resistivity is 14×1015 Ω⋅cm making it a dielectric with a 19.5MV/m breakdown voltage.
@Hazel Li
Applications
●Mechanical gears, sliding and guiding elements, housing parts, springs, chains, screws, nuts, fan wheels, pump parts, valve bodies.
●Electrical engineering: insulators, bobbins, connectors, parts for electronic devices such as televisions, telephones, etc.
●Vehicle: fuel sender unit, light/control stalk/combination switch (including shifter for light, turn signal), power windows, door lock systems, articulated shells.
●Model: model railway parts, such as trucks (bogies) and hand rails (handle bars). POM is tougher than ABS, comes in bright translucent colors, and is not paintable.
●Hobbies: radio-controlled helicopter main gear, landing skid, yo-yos, vaping drip tips, 3D printer wheels, K'Nex, ball-jointed dolls, etc.
●Medical: insulin pen, metered dose inhalers (MDI).
●Food industry: Food and Drug Administration has approved some grades of POM for milk pumps, coffee spigots, filter housings and food conveyors.
●Furniture: hardware, locks, handles, hinges., rollers for sliding mechanisms of furnitures
●Construction: structural glass - pod holder for point
●Packaging: aerosol cans, vehicle tanks.
●Pens: used as the material for pen bodies and caps
●Sports: paintball accessories. It is often used for machined parts of paintball markers that do not require the strength of aluminium, such as handles and reciprocating bolts. POM is also used in airsoft guns to reduce piston noise.
●Longboarding: puck material for slide gloves help the rider touch the road and lean on their hand to slow down, stop, or perform tricks.
●Clothing: zippers.
●Music: picks, Irish flutes, bagpipes, practice chanters, harpsichord plectra, instrument mouthpieces, tips of some drum sticks.
●Dining: fully automatic coffee brewers; knife handles (particularly folding knives).
●Horology: mechanical movement parts (e.g. Lemania 5100), watch bracelets (e.g. IWC Porsche Design 3701).
●Vapor/e-cigarette accessories: material used in the manufacturing of most "Drip Tips" (Mouthpiece).
●Tobacco products: The BIC Group uses Delrin for their lighters.
●Keyboard keycaps: Cherry uses POM for their G80 and G81 series keyboards.
●Electrical engineering: insulators, bobbins, connectors, parts for electronic devices such as televisions, telephones, etc.
●Vehicle: fuel sender unit, light/control stalk/combination switch (including shifter for light, turn signal), power windows, door lock systems, articulated shells.
●Model: model railway parts, such as trucks (bogies) and hand rails (handle bars). POM is tougher than ABS, comes in bright translucent colors, and is not paintable.
●Hobbies: radio-controlled helicopter main gear, landing skid, yo-yos, vaping drip tips, 3D printer wheels, K'Nex, ball-jointed dolls, etc.
●Medical: insulin pen, metered dose inhalers (MDI).
●Food industry: Food and Drug Administration has approved some grades of POM for milk pumps, coffee spigots, filter housings and food conveyors.
●Furniture: hardware, locks, handles, hinges., rollers for sliding mechanisms of furnitures
●Construction: structural glass - pod holder for point
●Packaging: aerosol cans, vehicle tanks.
●Pens: used as the material for pen bodies and caps
●Sports: paintball accessories. It is often used for machined parts of paintball markers that do not require the strength of aluminium, such as handles and reciprocating bolts. POM is also used in airsoft guns to reduce piston noise.
●Longboarding: puck material for slide gloves help the rider touch the road and lean on their hand to slow down, stop, or perform tricks.
●Clothing: zippers.
●Music: picks, Irish flutes, bagpipes, practice chanters, harpsichord plectra, instrument mouthpieces, tips of some drum sticks.
●Dining: fully automatic coffee brewers; knife handles (particularly folding knives).
●Horology: mechanical movement parts (e.g. Lemania 5100), watch bracelets (e.g. IWC Porsche Design 3701).
●Vapor/e-cigarette accessories: material used in the manufacturing of most "Drip Tips" (Mouthpiece).
●Tobacco products: The BIC Group uses Delrin for their lighters.
●Keyboard keycaps: Cherry uses POM for their G80 and G81 series keyboards.
@Hazel Li
Company Profile
Located in Xingtai City, Hebei Province, Hebei Ruiran New Material Technology Co. Ltd. is a professional Chinese supplier of plastic materials. Ruiran is committed to the cause of plastic particles over 15 years.
We have experienced factory for production and professional teams for research and development. Our warehouse has a large number of goods in stock with complete varieties and specifications. We mainly provide plastic particles, medium soft, medium hard, extra soft, extra hard, environmental friendly, odorless, non-toxic, anti-static, cold-resistant,etc.Plastic particles have a wide application in industries, mainly used in rainshoes, scooter wheels, rope skipping, road cones and many other fields.
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. Products have been sold to countries across the world.
If you are interested in any of our products or would like to discuss a customized order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Package and Delivery
Pre-sale service:
1. Before sales, we can offer 0-5 kg samples free of charge except the shipping fees.
2. 24 online service are given.
3. Customization gives you more choice.
1. Before sales, we can offer 0-5 kg samples free of charge except the shipping fees.
2. 24 online service are given.
3. Customization gives you more choice.
4. Please tell us plastic particles( grade, origin, producer and application). We provide various kinds of raw and recycled plastic materials.
After-sales service:
1. After purchase, we provide repeat customers with nice prices.
2. If you have any problem, contact us via Whats-App, Alibaba, Facebook, YouTube and other media.
After-sales service:
1. After purchase, we provide repeat customers with nice prices.
2. If you have any problem, contact us via Whats-App, Alibaba, Facebook, YouTube and other media.
FAQ
1)What's the delivery time?
Tons of plastic particles are usually shipped by sea and will be delivered within 50-60 working days after receiving the deposit.
2) What payment methods are supported?
Payment method is T/T or LC, PayPal, Western Union, Credit Card, etc.
3) I don’t know which one is suitable for me?
Please tell us applications, we will help you decide what is the most suitable.
Tons of plastic particles are usually shipped by sea and will be delivered within 50-60 working days after receiving the deposit.
2) What payment methods are supported?
Payment method is T/T or LC, PayPal, Western Union, Credit Card, etc.
3) I don’t know which one is suitable for me?
Please tell us applications, we will help you decide what is the most suitable.
4) Can I have a sample before marking an order?
Sample with 5 kg is free of charge, delivered by express or air. Please tell us the plastic resin you need and its model, grade, application and amount so we can give suggestions accordingly.
Contact Us
WEBSITE: //www.hbruiran.com/
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
