High quality laboratory benchtop multiparameter water analyser quality analysis ph tds ec meter
- Category: >>>
- Supplier: Hangzhou Asmik Sensors Technology Co. Ltd.
Share on (1600820510962):
Product Overview
Description
Products Description
GENERAL FEATURES
* High resolution LCD display, 5.7 inches.
* Multi-reading feature allows auto-read, timed-read and continuous-read.
* Automatic/Manual temperature compensation ensures accurate results.
* Auto-hold feature senses and locks the measurement endpoint.
* Data Storage 500 sets (GLP-compliant).
* Support for USB or RS-232 communication.
* Reset feature automatically resumes all settings back to factory default options.
* IP54 waterproof.
* Multi-reading feature allows auto-read, timed-read and continuous-read.
* Automatic/Manual temperature compensation ensures accurate results.
* Auto-hold feature senses and locks the measurement endpoint.
* Data Storage 500 sets (GLP-compliant).
* Support for USB or RS-232 communication.
* Reset feature automatically resumes all settings back to factory default options.
* IP54 waterproof.
pH
* 1-5 points calibration with Standard Recognition.
* Selectable pH buffer groups, including NIST, DIN, GB.
* Automatic electrode diagnosis with pH slope and offset display.
* Selectable pH buffer groups, including NIST, DIN, GB.
* Automatic electrode diagnosis with pH slope and offset display.
Ion
* 1-6 points calibration
* Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc.
* Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.
* Over 10 methods are built-in, including F- , Cl- , Br- , I- , NO3 - , BF4 - , NH4 + , K+ , Na+ , Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.
* Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc.
* Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.
* Over 10 methods are built-in, including F- , Cl- , Br- , I- , NO3 - , BF4 - , NH4 + , K+ , Na+ , Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.
Conductivity
* 1-3 points calibration with Standard Recognition.
* Settable parameters, including cell constant, temperature compensation coefficient and TDS factor.
* Temperature compensation type (none, linear, pure water).
* Settable parameters, including cell constant, temperature compensation coefficient and TDS factor.
* Temperature compensation type (none, linear, pure water).
DO
* Support for air-saturated water or zero oxygen calibration.
* Auto barometric pressure compensation
* Manual Salinity Factor Correction
* Selectable pressure unit, including kPa, mbar, Torr, Atm.
* Auto barometric pressure compensation
* Manual Salinity Factor Correction
* Selectable pressure unit, including kPa, mbar, Torr, Atm.
Automatic identification standard solution
Fast calibration and more accurate measurement
Multiple external devices available
PC,printer
Parameters | pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation) | ||
pH | Range | -2.00 to 20.00pH | |
Resolution | 0.1, 0.01 pH | ||
Accuracy | ± 0.01 pH | ||
Calibration Points | Up to 5 | ||
Standard Customization | Yes | ||
Standard Recognition | NIST, GB and DIN buffers | ||
Slope Limit | Yes | ||
mV | Range | -2000.0 to 2000.0 mV | |
Resolution | 0.1 mV | ||
Accuracy | ± 0.3 mV or ± 0.1% | ||
pX | Range | -2.00 to 20.00 | |
Resolution | 0.1, 0.01 pX | ||
Accuracy | ± 0.01 pX | ||
Calibration Points | Up to 5 | ||
ISE | Range | 1E-9 to 9.999E9 | |
Units | mol/L, mmol/L, g/L, mg/L, μ g/L, ppm | ||
Resolution | Up to 4 significant digits | ||
Accuracy | ± 0.5% | ||
Calibration Points | Up to 5 | ||
Conductivity | Range | 0.000 μ S/cm to 1000 mS/cm | |
Resolution | 0.001 μ S/cm minimum, various with range selection | ||
Accuracy | ± 1.0% FS | ||
Reference Temperature | 20, 25 ºC | ||
Calibration Points | Up to 3 | ||
Standard Recognition | 84 μ S/cm, 1413 μ S/cm, 12.88mS/cm | ||
Resistivity | Range | 5.00 Ω ·cm~20.00 M Ω ·cm | |
Resolution | 0.01 Ω ·cm minimum | ||
Accuracy | ± 1.0% FS | ||
TDS | Range | 0.00mg/L~300g/L | |
Resolution | 0.01mg/L minimum, various with range selection | ||
Accuracy | ± 1.0% FS | ||
Salinity | Range | (0.00~8.00)% | |
Resolution | 0.01% | ||
Accuracy | ± 0.2% | ||
Dissolved Oxygen Concentration | Range | 0.00 to 20.00 mg/L | |
Resolution | 0.01mg/L | ||
Accuracy | ± 0.1mg/L | ||
Calibration Reminder | Yes | ||
Calibration Points | Air-saturated water or zero point | ||
Barometric Compensation | Yes | ||
Manual Salinity Factor Correction | Yes | ||
Saturation | Range | (0.0 to 200.0)% | |
Resolution | 0.1% | ||
Accuracy | ± 2.0% | ||
Temperature | Range | -5 to 110 ºC, 23 to 230 ºF | |
Unit | ºC, ºF | ||
Resolution | 0.1 | ||
Relative Accuracy | ± 0.2 | ||
Measurement | Reading Mode | Auto Read (Fast, Medium, Slow), Timed, Continuous | |
Reading Prompts | Reading, Stable, Locked | ||
Temp. Compensation | ATC, MTC | ||
Data Storage | 500 results each | ||
GLP Features | Yes | ||
Inputs | pH Electrode | BNC(Q9) | |
DO with Temp. Probe | 4-pin aviation connector | ||
Conductivity with Temp. Probe | 5-pin aviation connector | ||
USB | USB 2.0 flash memory device, PC | ||
RS 232 | Printer | ||
Display options | Backlight | Yes | |
Auto Shutdown | 1~60 min, off | ||
IP Rating | IP54 | ||
Date and Time | Yes | ||
General | Power | AC Adapter, 100-240V AC input, DC9V output | |
Dimensions | 242 x 195 x 68 mm | ||
Weight | 900g (1.98 lb) | ||
Why Choose Us
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
