Hengju Hydraulic DSD/DSV G02/G03 2C2A2N8C6C DC24A110A220 31 hydraulic power device electromagnetic hydraulic valve
- Category: >>>
- Supplier: Shenzhen Baoan Shiyan Hengju Hydraulic Machinery Equipment Firm
Share on (1600823924475):
Product Overview
Description
Company Profile
Shiyan Hengju Hydraulic Machinery Equipment, Baoan District, Shenzhen
We are Hengju Hydraulic Machinery Equipment, located in Foshan City, Guangdong Province, China. We have R&D department with about 5-10 engineers and designers. Our factory has more than 100 skilled employees, and the production equipment has advanced manufacturing equipment and testing equipment such as CNC lathes, machining centers, CNC milling machines, CNC special grinding machines, double-sided grinding machines, and fully automatic 3D measuring instruments.
The main products are hydraulic variable vane pumps, duplex pumps, HVP high pressure variable vane pumps, PV2R1&PV2R2 series, V&VQ series, T6&T7 series, SQP series, VQ series quantitative vane pumps and hydraulic motors.
Our products are widely used in industrial machinery, CNC lathes, shoemaking machinery, woodworking machinery, plastic machinery, construction machinery and various hydraulic system machinery. We are also able to provide customized products and services according to your specifications. , we look forward to sincere cooperation with your company.
The main products are hydraulic variable vane pumps, duplex pumps, HVP high pressure variable vane pumps, PV2R1&PV2R2 series, V&VQ series, T6&T7 series, SQP series, VQ series quantitative vane pumps and hydraulic motors.
Our products are widely used in industrial machinery, CNC lathes, shoemaking machinery, woodworking machinery, plastic machinery, construction machinery and various hydraulic system machinery. We are also able to provide customized products and services according to your specifications. , we look forward to sincere cooperation with your company.
Product Details
1. Low noise
2. High pressure and high performance
3. Wide range of applications (such as injection molding machines, pressure die-casting machines, metal cutting airports, packaging machinery, brick hole machines, etc.
4. Good interchangeability, easy maintenance, save costs
2. High pressure and high performance
3. Wide range of applications (such as injection molding machines, pressure die-casting machines, metal cutting airports, packaging machinery, brick hole machines, etc.
4. Good interchangeability, easy maintenance, save costs
Enterprise Honor
1.The company established more than 10 years, old brand, worthy of trust,Has more than 1000k+ followers
2.The company's product category is complete, also have a variety of accessories to provide.
3.All products have been passed strict quality test before shipment, make sure high quality.
4.24H customer service,Please feel free to contact me if you have any questions.
5.One-year warranty, we have professional and technical personnel for docking, product quality is hard, and after-sales are guaranteed. After the one-year warranty is over, we can provide maintenance services for customers (this requires a fee).
2.The company's product category is complete, also have a variety of accessories to provide.
3.All products have been passed strict quality test before shipment, make sure high quality.
4.24H customer service,Please feel free to contact me if you have any questions.
5.One-year warranty, we have professional and technical personnel for docking, product quality is hard, and after-sales are guaranteed. After the one-year warranty is over, we can provide maintenance services for customers (this requires a fee).
Customer Praise
The company has been in the liquid pressure business for more than ten years, has acquired multi-level engineering technology, has participated in multiple large and small liquid pressure exhibitions, and has received many international customers.
Usage Notice
To protect your rights please read the following carefully
Pump Start-up Procedure
Preparation Prior to Start-up
The reservoir and circuit should be clean and free of dirt and debris prior to filling with fluid.
Circuit Cleanup
The reservoir should be charged with filtered hydraulic fluid. The fluid level should be sufficient to prevent vortexing at the suction connection to the pump inlet. It is good practice to clean the system by flushing and filtering, using an external slave pump.
Filling Pump and Removing Air
If the pump is mounted above the fluid level, it should be filled with fluid through the outlet port. If the pump is mounted below the fluid level, the pump outlet fitting (or other downstream fitting or plug) can be loosened to allow fluid to displace the air. It may be necessary to loosen the fill cap on the reservoir to allow the fluid to flow freely. When a solid stream of fluid with no observed air begins to drain through the loosened fitting, the fitting should be retightened. An air bleed valve in the outlet circuit is also recommended to remove trapped air. If such a device is used, the pump should be filled with fluid before start-up. In some cases, it may be possible to prime the pump by running the engine starter for five to ten seconds with the throttle and/or ignition switch in the "off" position. It will be necessary to loosen a fitting or plug in the pump outlet to allow air to escape.
Pump Start-up
All controls should be placed in the neutral position so the pump is unloaded when started. Start the engine and run at low idle. Once the pump is started, it should prime and pump within a few seconds. If it does not, make sure there are no restrictions between the reservoir and the inlet to the pump, and that there are no air leaks in the inlet line and connections. Also, make sure that trapped air can escape from the outlet. Run at low engine idle for approximately five minutes. Then, while observing the reservoir fluid level, operate the implements. Extend all actuators to maximum safe limits to completely fill the system with fluid. Do not run with the fluid level below the "low" limit. Add fluid to the reservoir to bring the fluid to the proper fill level.
Pump Start-up Procedure
Preparation Prior to Start-up
The reservoir and circuit should be clean and free of dirt and debris prior to filling with fluid.
Circuit Cleanup
The reservoir should be charged with filtered hydraulic fluid. The fluid level should be sufficient to prevent vortexing at the suction connection to the pump inlet. It is good practice to clean the system by flushing and filtering, using an external slave pump.
Filling Pump and Removing Air
If the pump is mounted above the fluid level, it should be filled with fluid through the outlet port. If the pump is mounted below the fluid level, the pump outlet fitting (or other downstream fitting or plug) can be loosened to allow fluid to displace the air. It may be necessary to loosen the fill cap on the reservoir to allow the fluid to flow freely. When a solid stream of fluid with no observed air begins to drain through the loosened fitting, the fitting should be retightened. An air bleed valve in the outlet circuit is also recommended to remove trapped air. If such a device is used, the pump should be filled with fluid before start-up. In some cases, it may be possible to prime the pump by running the engine starter for five to ten seconds with the throttle and/or ignition switch in the "off" position. It will be necessary to loosen a fitting or plug in the pump outlet to allow air to escape.
Pump Start-up
All controls should be placed in the neutral position so the pump is unloaded when started. Start the engine and run at low idle. Once the pump is started, it should prime and pump within a few seconds. If it does not, make sure there are no restrictions between the reservoir and the inlet to the pump, and that there are no air leaks in the inlet line and connections. Also, make sure that trapped air can escape from the outlet. Run at low engine idle for approximately five minutes. Then, while observing the reservoir fluid level, operate the implements. Extend all actuators to maximum safe limits to completely fill the system with fluid. Do not run with the fluid level below the "low" limit. Add fluid to the reservoir to bring the fluid to the proper fill level.
Service Advantage
Pre-sale service:
*We provide presales in our first cooperation, make clear your situation and give you some advice, you can making investment budget, manufacturing, planing, so that customers can make a reasonable plan with less cost.
Stage 1st: Let’s be honest with each other and make clear the situation of each customer first, then we can give best advice, because we’re over 10 years experience in hydraulic components.
Stage 2st: I will give the details to each customer for reference, including the dimension, performance, quality and price level.
Stage 3st: We can compare the products one by one, then confirm the reasonable products with best price.
In-sale service:
Stage 1st: Once we receive the order list, we will confirm the exact model and quantity one by one, then place the order list to each factory.
Stage 2st: We will tracking the production progress and quality, check the exact model and quantity one by one before delivering. Because we’re exporting agent for factories, so our leading time is more shorter, quality tracking is more strict.
And you can buy the all hydraulic components from our company, because we’re professional in whole hydraulic components, not only for some products like factories.
Stage 3st: Lowest sea freight cost and best service. We’re cooperating with our forwarders over 8 years, so we can get best price and service for our each customer.
After-sale service:
After-sale service are most important in each business, we will do the below things in each order:
Stage 1st: Tracking the shipment and inform the customer before the Arrival Date.
Stage 2st: Check the goods together with our customers and tracking the quality during the use condition.
Stage 3st: We will charge all questions if you buy from me, because reputation is most important in exporting business.
*We provide presales in our first cooperation, make clear your situation and give you some advice, you can making investment budget, manufacturing, planing, so that customers can make a reasonable plan with less cost.
Stage 1st: Let’s be honest with each other and make clear the situation of each customer first, then we can give best advice, because we’re over 10 years experience in hydraulic components.
Stage 2st: I will give the details to each customer for reference, including the dimension, performance, quality and price level.
Stage 3st: We can compare the products one by one, then confirm the reasonable products with best price.
In-sale service:
Stage 1st: Once we receive the order list, we will confirm the exact model and quantity one by one, then place the order list to each factory.
Stage 2st: We will tracking the production progress and quality, check the exact model and quantity one by one before delivering. Because we’re exporting agent for factories, so our leading time is more shorter, quality tracking is more strict.
And you can buy the all hydraulic components from our company, because we’re professional in whole hydraulic components, not only for some products like factories.
Stage 3st: Lowest sea freight cost and best service. We’re cooperating with our forwarders over 8 years, so we can get best price and service for our each customer.
After-sale service:
After-sale service are most important in each business, we will do the below things in each order:
Stage 1st: Tracking the shipment and inform the customer before the Arrival Date.
Stage 2st: Check the goods together with our customers and tracking the quality during the use condition.
Stage 3st: We will charge all questions if you buy from me, because reputation is most important in exporting business.
Application
Packaging machinery, injection molding machinery, rubber machinery, hydraulic machinery, die-casting machinery, plastic machinery, construction machinery, machine tool machinery, forging machinery and walking machinery, etc.
FAQ
Q: Are you trading company or manufacture?
A: We are factory
Q: How long is your delivery time?
A: Gernally it is 1-2days if the goods are in stock.It is 5-7days if the goods no stock.It is subject to order quantity.
Q: Do you provide sample,Is it free or extra?
A: We are willing to provide samples to test quality first, it is not for free because it is high value products. But sample cost can return in bulk order.
Q: What is the terms of payment?
A: 100% deposit or 30% deposit, 70% before shippment.
Q: How long is the warranty?
A: We offer 12 months warranty.
A: We are factory
Q: How long is your delivery time?
A: Gernally it is 1-2days if the goods are in stock.It is 5-7days if the goods no stock.It is subject to order quantity.
Q: Do you provide sample,Is it free or extra?
A: We are willing to provide samples to test quality first, it is not for free because it is high value products. But sample cost can return in bulk order.
Q: What is the terms of payment?
A: 100% deposit or 30% deposit, 70% before shippment.
Q: How long is the warranty?
A: We offer 12 months warranty.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
