Share on (1600828440894):
8Port 10/100 PoE+2Port Uplink Ethernet Switch | ||||
Hardware Specifications | ||||
Network Connector | 8+2-port RJ45 for 10/100BASE-TX, auto MDI/MDIX | |||
PoE Inject Port | 8-port with 802.3af/at PoE injector function (Port 1 to Port 8) | |||
LED Display | System: Power (Green) Per PoE port: PoE (Green, Port 1 to Port 8) LNK/ACT (Green, Uplink 1 to 2Port ) | |||
DIP Switch | Standard mode for 100M Extend mode for 250m (Based on the cable category)/One-click VLAN port isolation | |||
Switch Architecture | Store and Forward switch architecture | |||
MAC Address Table | 2K MAC address table with auto learning function | |||
Switch Fabric | 2Gbps | |||
Switch Throughput | 1.48Mpps@64 bytes | |||
Maximum Packet Size | 1536bytes | |||
Flow Control | Back pressure for half duplex. IEEE 802.3x pause frame for full duplex | |||
Power Requirements | 52V2.3A/52V2.3A Built-in power supply (optional) | |||
Power Consumption | Max.120watts, | |||
Dimensions (W x D x H) | 200*160*40 mm | |||
Power over Ethernet | ||||
PoE Standard | IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet | |||
PoE Power Supply Type | End-span + mid-span | |||
Power Pin Assignment | 1/2(+), 3/6(-), | |||
PoE Power Output | Per Port max. 15.4 watts (IEEE 802.3af) Per Port. max. 30 watts (IEEE 802.3at) | |||
PoE Power Budget | 115 watts | |||
Number of PDs, 7 watts | 8 | |||
Number of PDs, 15.4 watts | 7 | |||
Number of PDs, 30 watts | 3 | |||
Standard Conformance | ||||
Standard Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus | |||
Environment | ||||
Operating Environment | 0 ~ 50 degrees C | |||
Storage Environment | -10 ~ 70 degrees C | |||
Operating Humidity | 5 ~ 95%, relative humidity, non-condensing | |||
Storage Humidity | 5 ~ 95%, relative humidity, non-condensing | |||
New products from manufacturers at wholesale prices