Surgery lipolysis face lift endolaser bare fiber evlt radial fiber hemorrhoid fistula fiber
- Category: >>>
- Supplier: Baoding Triangel Rsd Electronics Technology Limited
Share on (1600849129028):
Product Overview
Description
Surgery lipolysis face lift endolaser bare fiber evlt radial fiber hemorrhoid fistula fiber
Products Description
SMA905 international standard Core diameter 400µm 600 µm 800 µm optical laser fiber cable, radial fiber and bare fiebr, for
surgery of EVLT ENT PLDD Lipolysis Hemorrhoid the vena saphena magna and the vena saphena parva
surgery of EVLT ENT PLDD Lipolysis Hemorrhoid the vena saphena magna and the vena saphena parva
SILICA OPTIC FIBER FOR LASER INTERVENTIONAL THERAPY
This silica/quartz optical fibers are used with laser therapy instruments, mainly transmitting 400-1000nm semiconductor laser,
1604nm YAG laser, and 2100nm holmium laser.
The application scope of the laser therapy instruments includes: varicose veins treatment, laser cosmetic, laser cutting
operation, laser
lithotripsy, disc herniation, etc.
This silica/quartz optical fibers are used with laser therapy instruments, mainly transmitting 400-1000nm semiconductor laser,
1604nm YAG laser, and 2100nm holmium laser.
The application scope of the laser therapy instruments includes: varicose veins treatment, laser cosmetic, laser cutting
operation, laser
lithotripsy, disc herniation, etc.
Properties:
1. The fiber is provided with SMA905 standard connector;
2. The coupling efficiency of fiber is above 80% (λ=632.8nm);
3. The transmitting power is up to 200W/ cm2 (0.5m core diameter, continuous Nd: YAG laser);4. The fiber is interchangeable, safe
and reliable in operation;
5. Customer designs are available.
Applications:
Laser in operations, high power laser (e.g. Nd: YAG, Ho: YAG).
Urology (resection of prostate, opening of ureteral strictures, partial nephrectomy);
Gynaecology (septum dissection, adhesiolysis);
ENT (exision of tumors, tonsillectomy);
Pneumology (removal of multiple lung, metastases);
Orthopaedics (diskectomy, menisectomy, chondroplasty).
1. The fiber is provided with SMA905 standard connector;
2. The coupling efficiency of fiber is above 80% (λ=632.8nm);
3. The transmitting power is up to 200W/ cm2 (0.5m core diameter, continuous Nd: YAG laser);4. The fiber is interchangeable, safe
and reliable in operation;
5. Customer designs are available.
Applications:
Laser in operations, high power laser (e.g. Nd: YAG, Ho: YAG).
Urology (resection of prostate, opening of ureteral strictures, partial nephrectomy);
Gynaecology (septum dissection, adhesiolysis);
ENT (exision of tumors, tonsillectomy);
Pneumology (removal of multiple lung, metastases);
Orthopaedics (diskectomy, menisectomy, chondroplasty).
360° RADIAL TIP FIBER produced by TRIANGEL RSD LIMITED applies energy faster and more accurately than any other fiber type in the endovenous market. FIBER (360°) used with SWING LASER ensures energy emission that guarantees homogenous photothermal destruction of the vein wall, allowing safe closure of the vein. By avoiding perforation of the vein wall and associated thermal irritation of the surrounding tissue, intra- and post-operative pain is minimized, as are echymosis and other side-effects.
RADIAL FIBER provides simple and safe control and positioning of the fiber thanks to the excellent ultrasound visibility of the distal end of the fiber. RADIAL FIBER is equipped with safety markings for optimal control of the pullback process.
Why Radial fiber?
When combined with the 980nm/1470 mm laser source, this laser fiber that emits at 360° affords the ideal endovenous thermal ablation. It is therefore possible to gently and evenly introduce the laser energy into the lumen of the vein and ensure the closure of the vein based on photothermal destruction (at temperatures between 100 and 120°C). Perforation of the vein wall (as in the case of the conventional bare tip fibre) and the associated thermal irritation of the surrounding tissue are prevented,thereby minimizing postoperative pain, ecchymosis, and other side effects. The TRIANGEL 360 Radial fiber (atraumatic fiber tip) is guided directly into the vein via a short introducer. Thanks to excellent visibility in ultrasound, the fiber tip can be optimally monitored and placed. Various publications have described the superiority of the Radial concept over the old generation of fibres.Advantage
When using a conventional end-face fiber (figure on the right), the laser energy leaves the fiber ahead and is scattered by a
cone. At the same time, an abrupt increase in temperature to a few hundred degrees occurs in the tip of the light guide, which contributes to the formation of carbon deposits at the tip of the fiber, to the ruptures of the vein to be treated, and as a result to hematomas and pain in the postlaser period.
When using a radial light guide, the energy dissipates as a ring along the entire circumference of the vein (figure on the
right).This is just an advantage that allows you to make the process of processing the veins unprecedentedly accurate and uniform.The effect of using such a fiber in comparison with the end - the ability to successfully handle the veins of any! diameter,absence of hematomas, pulling sensations in the postprocedural period. Terms of wearing compression knitwear after laser treatment using Radial technology are significantly reduced.
This product consists of three parts. They are SMA905 standard connector, optical fiber, and protection tube. Optical fiber is made of quartz glass. SMA905 standard connector is copper. And protective tube is made of silicone rubber.
Optical fiber transmission efficiency: when the total length of the optical fiber is ≤ 5m, the transmission efficiency of the
corresponding wavelength is not less than 80% when it is placed flat.
Contact us if you need customization service.
cone. At the same time, an abrupt increase in temperature to a few hundred degrees occurs in the tip of the light guide, which contributes to the formation of carbon deposits at the tip of the fiber, to the ruptures of the vein to be treated, and as a result to hematomas and pain in the postlaser period.
When using a radial light guide, the energy dissipates as a ring along the entire circumference of the vein (figure on the
right).This is just an advantage that allows you to make the process of processing the veins unprecedentedly accurate and uniform.The effect of using such a fiber in comparison with the end - the ability to successfully handle the veins of any! diameter,absence of hematomas, pulling sensations in the postprocedural period. Terms of wearing compression knitwear after laser treatment using Radial technology are significantly reduced.
Construction of Fiber
This product consists of three parts. They are SMA905 standard connector, optical fiber, and protection tube. Optical fiber is made of quartz glass. SMA905 standard connector is copper. And protective tube is made of silicone rubber.
Optical fiber transmission efficiency: when the total length of the optical fiber is ≤ 5m, the transmission efficiency of the
corresponding wavelength is not less than 80% when it is placed flat.
Contact us if you need customization service.
Clients with our machine
If you are interested, please click here to contact us
Company Profile
TRIANGEL RSD LIMITED,is one of the specialized manufactures focused on the Aesthetics &Medical laser equipment in China, established in March 2010.We have our own repair companies & training centers in several countries,like Portugal,Russia,Australia,South Africa... could offer the technical support and clinical training in the fast and efficient way.TRIANGEL got different certificates for clients from all over the world.Medical CE,ISO13485,RoHS;We also take part in exhibitions every year,Cosmoprof Asia(HongKong),DUBAI DERMA,INTERCHARM (Moscow),Expocosmetica(Oporto),AMSCA(South Africa)...
TRIANGEL,hope to be your Responsible,Sincere and Dependable partner in China!
Customer Feedback
FAQ
How many treatments will I need with Yaser 980nm?
For most patients, typically only one treatment is required. The session may last from 60-90 minutes for each area that is treated. Laser lipolysis is also an ideal choice for “touch ups” and revisions.
What body regions can be treated with Yaser 980nm?
Yaser 980nm is ideal for contouring the abdomen, flanks, thighs, saddlebags, arms, knees, back, bra bulge, and areas of loose or flabby skin.
What can I expect post-treatment?
For most patients, typically only one treatment is required. The session may last from 60-90 minutes for each area that is treated. Laser lipolysis is also an ideal choice for “touch ups” and revisions.
What body regions can be treated with Yaser 980nm?
Yaser 980nm is ideal for contouring the abdomen, flanks, thighs, saddlebags, arms, knees, back, bra bulge, and areas of loose or flabby skin.
What can I expect post-treatment?
Laser lipolysis is different from traditional liposuction in that it is less traumatic and can resume activities on the day of treatment. It is recommended to wear tights for 1-2 weeks, which helps reduce bruising and swelling. Regular physical exercise is also recommended.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
