MS polymer Waterproof Coating for Roof can be exposed
- Category: >>>
- Supplier: Qingdao Dimei Manufacturer Co. Ltd.
Share on (1600863340487):
Product Overview
Description
Product Description
MS1002 MSP Based Liquid waterproofing Membrane
MS1002 DM AquaBlocker is a solvent-free, water-free and asphalt-free building material, and also a non-slump waterproof sealant for construction. Meets waterproof requirements and is a sealant for horizontal surfaces. After being completely cured, the sealant will not penetrate water, and the maximum cracks of the bridge are 5 mm, and can resist the natural groundwater that corrodes the concrete.
Color | Grey, white, black （Colors to be customized） |
Appearance | Liquid |
Brush thickness （mm） | Each layer is at least 1 mm, at least two layers. |
Crack repair | The maximum width is 5mm, after drying it reaches 2.5mm thick |
Elongation at break at 2mm thickness | >700% |
Hardness Shore A | ~30A |
Spray waiting time between the first layer and the second layer | 8hours |
All dry time | 24housr |
Application temrature | +5°C ~ +35°C |
Optimal liquid temperature | +15°C ~ +25°C |
Hard coating resistance | -25°C ~ +80°C |
Packing | 5kg/bucket, 20kg/bucket |
Advantages
1. Based on SMP technology, MS1002 combines reliable crack bridging and waterproof performance
2. No solvent, no water and no asphalt. MS1002 has unparalleled ease of handling to replace asphalt emulsion.
3. In the temperature range of + 5° and + 35°C, it can adhere well to slightly wet substrates.
2. No solvent, no water and no asphalt. MS1002 has unparalleled ease of handling to replace asphalt emulsion.
3. In the temperature range of + 5° and + 35°C, it can adhere well to slightly wet substrates.
Product Applications
Applications
1. Building waterproof: used to provide long-term protection for structural elements in contact with the soil, such as basements, buildings without underground layers, foundations, floors, connectors, pipe casings from ground moisture, retained water.
2. Horizontal surface: MS1002 liquid is used to seal larger horizontal surfaces, such as foundations, floors, as a moisture-proof sealing material for commercial areas, and on balconies and terraces combined with screed and ceramic tiles. It is also suitable for filling settlement joints and expansion joints in commercial and industrial fields.
3. Precast concrete parts: MS1002 has high water-permeable concrete structural members with external stripe sealing, do not press water and ground moisture.
4. Substrate: Masonry, porous concrete/block, lime sandstone/block, precast concrete parts, concrete and watertight concrete. It is a one-component moisture-curing elastic sealant, the substrate is silane-terminated polymer (MS polymer).
5. MS1002 liquid can be directly coated on slightly damp substrate without primer. Avoid standing water..
2. Horizontal surface: MS1002 liquid is used to seal larger horizontal surfaces, such as foundations, floors, as a moisture-proof sealing material for commercial areas, and on balconies and terraces combined with screed and ceramic tiles. It is also suitable for filling settlement joints and expansion joints in commercial and industrial fields.
3. Precast concrete parts: MS1002 has high water-permeable concrete structural members with external stripe sealing, do not press water and ground moisture.
4. Substrate: Masonry, porous concrete/block, lime sandstone/block, precast concrete parts, concrete and watertight concrete. It is a one-component moisture-curing elastic sealant, the substrate is silane-terminated polymer (MS polymer).
5. MS1002 liquid can be directly coated on slightly damp substrate without primer. Avoid standing water..
Use instruction:
Product application range
Used as a waterproof coating for flat roofs and sloping roofs, including new roofs and roof repairs.
Construction method:
Construction shall be carried out in the following order:
1. Clean the roof: the roof must be cleaned before construction, and there should be no oil stains, deposited sand, residual paint, etc.
2. Open the paint cover, the paint will settle during storage. Use a stirring tool to stir the paint evenly before use.
3. Apply the paint directly to the roof by spraying with an airless high-pressure sprayer or brushing.
4. Strive for uniform coating, with a dry film thickness of at least 2mm or more.
Precautions
1. Some rubber and plastic materials may have poor adhesion, so pre-testing is required before construction.
2. Do not construct in rainy days, and do not allow water to accumulate before the construction of the flat slope roof. After the coating is applied, avoid rainwater within 8 hours. The surface drying time of the coating is about 50 minutes, and the surface drying speed will be faster under high temperature conditions and slower in winter. Pay attention to use up before the surface is dry after opening.
3. After the coating is applied, there must be an interval of more than 24 hours before walking on it.
4. The construction tools must be cleaned before the glue is cured, and the tools can be cleaned with diesel or alcohol.
Product specifications: 18L/barrel.
Storage period: 12 months
Storage and transportation requirements: Store in a cool and dry place, away from fire.
Used as a waterproof coating for flat roofs and sloping roofs, including new roofs and roof repairs.
Construction method:
Construction shall be carried out in the following order:
1. Clean the roof: the roof must be cleaned before construction, and there should be no oil stains, deposited sand, residual paint, etc.
2. Open the paint cover, the paint will settle during storage. Use a stirring tool to stir the paint evenly before use.
3. Apply the paint directly to the roof by spraying with an airless high-pressure sprayer or brushing.
4. Strive for uniform coating, with a dry film thickness of at least 2mm or more.
Precautions
1. Some rubber and plastic materials may have poor adhesion, so pre-testing is required before construction.
2. Do not construct in rainy days, and do not allow water to accumulate before the construction of the flat slope roof. After the coating is applied, avoid rainwater within 8 hours. The surface drying time of the coating is about 50 minutes, and the surface drying speed will be faster under high temperature conditions and slower in winter. Pay attention to use up before the surface is dry after opening.
3. After the coating is applied, there must be an interval of more than 24 hours before walking on it.
4. The construction tools must be cleaned before the glue is cured, and the tools can be cleaned with diesel or alcohol.
Product specifications: 18L/barrel.
Storage period: 12 months
Storage and transportation requirements: Store in a cool and dry place, away from fire.
Recommend Products
Packing & Delivery
Company Profile
Qingdao DiMei Manufacturer Company Limited is one of the wholly own subsidiary of D&M Manufacturer Co., Limited, which was founded in 2014 and is located in HongKong. DiMei company is a professional corporation which research & develop, manufacture adhesives, sealants and other chemicals, which are widely used in many areas, such as automobile manufacturing, modification & maintenance, indoor and outdoor construction & decoration and many industry application fields, as materials of bonding, sealing, perfusion and coating between parts. To date, DiMei (D&M) company has successfully developed more than 30 kinds of mature products.
Qingdao DiMei Manufacturer Company Limited's main products are Polyurethane sealant, Hybrid MS Polymer sealant, Silicone sealant and so on. With strong technical force, DiMei develops new products according to customer specific requirements. DiMei also provide OEM service, we have accumulated rich OEM service experience.
Benefiting from our advanced research technologies and laboratory, dedicated product development team and well equipped modern production lines, our high quality products are now trusted by clients from USA, Europe, South-east Asia and so on.
Qingdao DiMei Manufacturer Company Limited's main products are Polyurethane sealant, Hybrid MS Polymer sealant, Silicone sealant and so on. With strong technical force, DiMei develops new products according to customer specific requirements. DiMei also provide OEM service, we have accumulated rich OEM service experience.
Benefiting from our advanced research technologies and laboratory, dedicated product development team and well equipped modern production lines, our high quality products are now trusted by clients from USA, Europe, South-east Asia and so on.
FAQ
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
