CAS 31795 24 1 Organic Silicone Water Repellent Liquid Methyl Potassium Silicate

Potassium Trimethylsilanolate, Potassium methyl-silicate, Potassium methylsilanetriolate, Trimethylsilanol potassium salt.

DK-104

Potassium Trimethylsilanolate is a basic water solution mainly composed of potassium and methyl silica gel, which can react with CO2 or other acid compounds in the air to form the active substance polymethylsilicic acid to produce waterproof property. Water repellent for minerals.

The product should be diluted with water when used., can produce surface waterproof and reduce moisture absorption. It is permeable, absorbable and able to maintain the natural appearance of the substrate. Can react with CO2 or other acidic compounds in the air, on the surface of substrate to form a layer of insoluble mesh breathable waterproof membrane, has excellent waterproof effect and anti-seepage, moisture, rust resistance, anti-aging, anti-pollution, avoid water suction base, thus reducing the freezing and thawing and weathering cause peeling off, increasing basal life. This is the product of simple construction, low cost, the effect lasting, scrub resistance, high and low temperature resistance (50 ~ 150 ℃)

Mainly the surface treatment of stone material, tile, ceramic, concrete, cement mortar, perlite, gypsum and timber; as additive of water glass as well.

1. Clean the surface of the substrate before use, and remove the water, dirt and other attachments of the substrate to be treated. If there are cracks, fill it with putty or cement slurry.

2. Slightly moisten the surface of the substrate for absorption before construction.

3. Dilute to 3% or lower when used. If more than 3% concentration is needed, it must be verified experimentally. High concentration will lead to white residue on the waterproof surface.

4. The construction can be carried out by soaking, spraying or painting with dishcloth, sponge, brush, roller and sealing spray gun. It can also be used in concrete.

5. After painting, the treated surface shall be naturally dried, and the surface shall be painted twice before drying. If use in stone material, ceramic tile surface protection is dealt with, after construction did not watch dry before wipe with soft cloth redundant liquid, do not touch water to conserve at least 24h.

1. Before use, a small sample concentration test should be conducted to determine whether the concentration is suitable for your specific use.

2. This product is highly corrosive, and it is strictly prohibited to contact with the skin directly. If it is accidentally touched, please wash it with water immediately. If contact with eyes, immediately wash with water for 15 minutes and seek medical advice. This product can also damage or kill plants, contaminate or corrode glass, plastic, aluminum and most metals. Special care should be taken when spraying. When used for home storage, avoid contact with children. But this product brush coating dry after alkaline disappeared, harmless to human body.

3. The preparation of waterproof agent is too high or used too much. After drying, a small amount of white precipitate will be formed on the coating surface.

4. In winter, if the temperature is too low, the product will freeze the crystal structure. When heated to room temperature, the solution will be transparent.

5. It is recommended to wear protective gloves and face glasses during construction, and avoid inhaling the fog generated by the product during outdoor construction. When spraying or fogging in the closed environment, partial exhaust is recommended.

This product with 50 to 60 kg, 250 kg plastic drum, temperature below 25 ℃ or store in sealed container, the shelf life of 12 months.

This product is not dangerous, but it is strong alkaline. It should be properly transported and stored.

250 KG TO A PLASTIC DRUM. 1400 KG TO AN IBC DRUM. 20 MT TO A 20' GP.

Q1: How can I get some samples?

A: We will offer the sample less than 1 kg free of charge, you should bear the express cost.

Q2: What's the MOQ?

A: The MOQ for this products should not less than 1000 kg.

Q3: What about OEM?

A: OEM order will be welcome, and we will be glad to produce according to your label.

Q4: How to confirm the Product Quality before placing orders?

A : You can get free sample and test it for making your product. If it is suitable to your product, then we will take the bulk production for your strictly accordance with the sample.

Q5: What's the payment terms?

A: L/C AT SIGHT OR T/T, 30% prepayment after signed the contract and the balance 70% after showed the copy of the B/L. And Alibaba trade assurance.

Q6: How to contact us ?

A: Please contact us freely as bellow info.