Wholesale film applications 100% degradable granules plastic pla pbat for fila ent
- Category: >>>
- Supplier: Shanghai Hengsi New Material Science&technology Co. Ltd.
Share on (1600914130443):
Product Overview
Description
Properties
100% Biodegradable Plastic PBAT blended with PLA Ecovio Polymer Granulate Pellets is biodegradable polyester designed for use in film applications.
Typical Property | Unit | Test Method | Result |
Density | g/cm3 | ISO 1183 | 1.22 |
MFR 190ºC,2160g | g/10min | ISO 1133 | 3~5 |
Melting Range | ºC | ISO 11357 | 110~120 |
Vicat A/50 | ºC | ISO 306 | 96 |
HDT B/Tff0.45 | ºC | ISO 75 | 46 |
Shore Hardness | ISO 868 | D/15:36 | |
Tensile Strength | MPa | ISO 527 | 28 |
Elongation | % | ISO 527 | 530 |
Yellow index | ASTM D-1925 | 29 |
Processing guide Storage: Temperatures during transportation and storage should not exceed 45 ºC. Keep resin in dry and ventilated stroage to prevent moisture. Aviod contact with soil, water, sludge and extremes temperature. The maximum shelf life is 2 years in ambient temperature of 23ºC
Drying: Pre drying of 001T is recommended prior to get the best processing performance. It is recommended to check the moisture content of the resin prior to processing. If the moisture content of the resin is less than 0.3% pre drying may not be needed. Typical drying conditions:2 hours at 175°F (80ºC)
Safty and Operation:MSDS of 001 can be obtained from polyester or suppliers. Read the MSDS carefully before operation.
Important: 001T is not suitable for directly blowing film. It’s developed for blending with other degradable materials, such as PHA and PLA. degradable polymers are temperature sensitive. It is important to make sure the blowing machine is closer to the lower temperature setting to start with. If the blow part is not optimized it is recommended to increase the temperature in 5ºC increments.
Drying: Pre drying of 001T is recommended prior to get the best processing performance. It is recommended to check the moisture content of the resin prior to processing. If the moisture content of the resin is less than 0.3% pre drying may not be needed. Typical drying conditions:2 hours at 175°F (80ºC)
Safty and Operation:MSDS of 001 can be obtained from polyester or suppliers. Read the MSDS carefully before operation.
Important: 001T is not suitable for directly blowing film. It’s developed for blending with other degradable materials, such as PHA and PLA. degradable polymers are temperature sensitive. It is important to make sure the blowing machine is closer to the lower temperature setting to start with. If the blow part is not optimized it is recommended to increase the temperature in 5ºC increments.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
