Stainless Steel RO Water Purifier EDI System Ultrapure Water Treatment Machine for Cosmetic Chemical Food
- Category: >>>
- Supplier: Yangzhou Ailusi Chemical Machinery Factory
Share on (1600934393065):
Product Overview
Description
Product Description
Semi-automatic production line
Water treatment → water tank → Ozone generator,pump(alternative) → homogenizer emulsifier → material tank → semi-automatic filling machine → semi-automatic capping machine → semi-automatic labeling machine → ink printer → conveyor(alternative)
Fully automatic production line
Water treatment → water tank → Ozone generator,pump(alternative) → homogenizer emulsifier → material tank → automatic filling and capping machine → automatic labeling machine → ink printer
Brief introduction of reverse osmosis system
Reverse osmosis process uses semi permeable spiral wound membranes to separate and remove dissolved solids,organic, pyrogens, sub micron colloidal matter and bacteria from water. Feed water isdelivered under a pressure of approximately 16 kg/cm2 through reverse osmosis membranes. Waterpermeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99.999% of organic, including pyrogens, and 99% bacterials in the feed water.
FEATURES AT A GLANCE
1.Stainless Steel Construction: The system is built using high-quality stainless steel materials that ensure durability, resistance to corrosion, and longevity, making it suitable for various industrial environments.
2.Reverse Osmosis (RO) Filtration: The system employs a reverse osmosis process, which utilizes a semipermeable membrane to remove a wide range of impurities, including dissolved salts, minerals, bacteria, and contaminants from the water. This stage is crucial for pre-treating the feed water before it enters the EDI process.
3.Electrodeionization (EDI) Technology: EDI is an advanced water purification technique that combines ion exchange and electrodialysis to further remove remaining ions and impurities from the water. It operates without the need for chemical regeneration, making it a more environmentally friendly and cost-effective option compared to traditional ion exchange processes.
4.Ultrapure Water Production: The combined RO and EDI process ensures the production of high-quality ultrapure water with a high degree of purity, typically exceeding 99.9%. This level of purity makes the water suitable for critical applications where even trace contaminants can be detrimental.5.Automatic Monitoring and Control: The system is equipped with advanced sensors, controllers, and automation features that continuously monitor water quality, pressure, flow rates, and other parameters. This allows for real-time adjustments and ensures consistent performance.
Product Paramenters
Model | ARO-1000 | Capacity | 1000lph |
Function | Producing Fresh Water | Type | Pure Water Treatment System |
Application | Filtration | Material | SUS304 |
Usage | Pure Water Process | Voltage | 110V/ 220V/ 380V |
Desalting rate | more than 97% | Membrane | USA DOW/ Korean CSM/ Domestic |
Application Product
1. Skin/Body care products( cream, lotion, gel, essential oil etc)
ARO- RO water treatment---AVE- Vacuum emulsifying mixer---AST-Storage tank--- AFM-Automatic/Semi-auto Filling machine--- ACM- Automatic/Semi-auto Capping machine--- ALM- Automatic/Semi-automatic Labeling machine--- Inkjet printer
Option: Bottle wash machine, Drying Conveyor belt, Shrinking machine, Packing machine, Rotor pump,Lab equipment. Filling and sealing machine, Aluminum foil sealing machine
2. Daily Chemical products( Liquid soap, dishwash, Shampoo, Liquid detergent, etc)
ARO- RO water treatment---AVE- Liquid wash mixer---AST-Storage tank--- AFM-Automatic/Semi-auto Filling machine--- ACM- Automatic/Semi-auto Capping machine--- ALM- Automatic/Semi-automatic Labeling machine--- Inkjet printer
Option: Bottle wash machine, Drying Conveyor belt, Shrinking machine, Packing machine, Rotor pump,Lab equipment. Filling and sealing machine, Aluminum foil sealing machine
ARO- RO water treatment---AVE- Vacuum emulsifying mixer---AST-Storage tank--- AFM-Automatic/Semi-auto Filling machine--- ACM- Automatic/Semi-auto Capping machine--- ALM- Automatic/Semi-automatic Labeling machine--- Inkjet printer
Option: Bottle wash machine, Drying Conveyor belt, Shrinking machine, Packing machine, Rotor pump,Lab equipment. Filling and sealing machine, Aluminum foil sealing machine
2. Daily Chemical products( Liquid soap, dishwash, Shampoo, Liquid detergent, etc)
ARO- RO water treatment---AVE- Liquid wash mixer---AST-Storage tank--- AFM-Automatic/Semi-auto Filling machine--- ACM- Automatic/Semi-auto Capping machine--- ALM- Automatic/Semi-automatic Labeling machine--- Inkjet printer
Option: Bottle wash machine, Drying Conveyor belt, Shrinking machine, Packing machine, Rotor pump,Lab equipment. Filling and sealing machine, Aluminum foil sealing machine
3. Perfume product
ARO- RO water treatment--- APM- Perfume making machine---AST-V Sealed storage tank--- AFM- Perfume filling machine--- ACP- Perfume crimping machine- ADB- Transparent film packing machine--- Inkjet printe
4. Make-up products( lipstick, lip gloss, eyeshadow, marscara, powder, nail polish etc)
Lipstick filling machine, powder press machine, 3 roll mill, powder mixing machine, etc.
ARO- RO water treatment--- APM- Perfume making machine---AST-V Sealed storage tank--- AFM- Perfume filling machine--- ACP- Perfume crimping machine- ADB- Transparent film packing machine--- Inkjet printe
4. Make-up products( lipstick, lip gloss, eyeshadow, marscara, powder, nail polish etc)
Lipstick filling machine, powder press machine, 3 roll mill, powder mixing machine, etc.
Details Images
Packing & Delivery
Factory Show
Service & FAQ
We provide Turn-key project service to customer.
1. Factory Layout design;
2. Factory Decoration based on GMP standard;
3. Formula of products;
4. Raw material etc;
5. Machine design, whole production line from A to Z;
6. Shipping service, FOB, CFR, CIF etc;
7. Installation service. Training service, Maintenance service.
2. Factory Decoration based on GMP standard;
3. Formula of products;
4. Raw material etc;
5. Machine design, whole production line from A to Z;
6. Shipping service, FOB, CFR, CIF etc;
7. Installation service. Training service, Maintenance service.
FAQ
Q1: Are you a factory or trading company?
A1: We are a factory specialized in Vacuum emulsifying mixer, filling machine, RO water treatment, capping machine and labeling machine…etc for cosmetic, pharmaceutical, chemical equipment over 20 years.
Q2: How does your factory do regarding quality control?
A2: Quality is priority. We always attach great importance to quality controlling from the beginning to the end. We support to inspect machine before shipment.
Q3: What’s the guarantee and the after service if we purchase from you?
A3: All the equipment ordered from us will provide one year guarantee from the delivery date.we could send our engineer to install or fix the machine locally.
Q4: Are your machines difficult to operate? How do you teach us to use the machine?
A4: Our machines are easy to operate, before delivery we will shoot instruction video to introduce machines' functions and to teach you how to use them.
Q5: Can you make the machine according to customers' request?
A5: Yes of course, OEM is acceptable. Most of our machines are customized design based on customer's requirements or situation.
A1: We are a factory specialized in Vacuum emulsifying mixer, filling machine, RO water treatment, capping machine and labeling machine…etc for cosmetic, pharmaceutical, chemical equipment over 20 years.
Q2: How does your factory do regarding quality control?
A2: Quality is priority. We always attach great importance to quality controlling from the beginning to the end. We support to inspect machine before shipment.
Q3: What’s the guarantee and the after service if we purchase from you?
A3: All the equipment ordered from us will provide one year guarantee from the delivery date.we could send our engineer to install or fix the machine locally.
Q4: Are your machines difficult to operate? How do you teach us to use the machine?
A4: Our machines are easy to operate, before delivery we will shoot instruction video to introduce machines' functions and to teach you how to use them.
Q5: Can you make the machine according to customers' request?
A5: Yes of course, OEM is acceptable. Most of our machines are customized design based on customer's requirements or situation.
Successful Project
Project in UK
Project in USA
Project in Thailand
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
