700W Hot Air Rework Station US Plug 110V 100 500 Degree Thermoregul LED Heat Gun Blow Dryer for BGA IC SMD Desoldering Tool
- Category: >>>
- Supplier: Shenzhen Maixi Technology Co. Ltd.
Share on (1600945540189):
Product Overview
Description
700W Hot Air Rework Station US Plug 110V 100-500 Degree Thermoregul LED Heat Gun Blow Dryer for BGA IC SMD Desoldering Tool
Feature:
1.Use microcomputer control,warming-up quickly,to the setting temperature only within 3-5 seconds
2.Digital LED display,High power,Temperature stabilization and is impervious to air,Use the brushless fan,and long life and low
noise.
3.Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun.
4.Safely remove BGA-IC,keep pins intact,Much more safe and reliable,Blowing PCB will not make it blister
5.Upgrade the ceramic heating core. When the fan is short-circuited, it cannot dissipate heat for the heat gun handle. The heat
gun handle will enter the overheat protection and automatically cut off the power to prevent the handle temperature from being too
high.
6.Essential product for cell phone repair, laptop repair, circuit boards, etc,Suitable for unsoldering multiple components,such as
SOIC CHIP QFP PLCC and BGA etc (especially for flat cables and cable connectors).
7.Applicable for hot contraction heating,depainting,degluing,defrosting,Preheating and rubber soldering and so forth.
Specification:
Power Voltage: 110V
Plug type:US
Power consumption:700W
Blower fan :Brushless Fan
Amount of Wind:120L/m(MAX)
Temperature Range:100~500℃
Handle Length :120cm
Noises :<45db
1.Use microcomputer control,warming-up quickly,to the setting temperature only within 3-5 seconds
2.Digital LED display,High power,Temperature stabilization and is impervious to air,Use the brushless fan,and long life and low
noise.
3.Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun.
4.Safely remove BGA-IC,keep pins intact,Much more safe and reliable,Blowing PCB will not make it blister
5.Upgrade the ceramic heating core. When the fan is short-circuited, it cannot dissipate heat for the heat gun handle. The heat
gun handle will enter the overheat protection and automatically cut off the power to prevent the handle temperature from being too
high.
6.Essential product for cell phone repair, laptop repair, circuit boards, etc,Suitable for unsoldering multiple components,such as
SOIC CHIP QFP PLCC and BGA etc (especially for flat cables and cable connectors).
7.Applicable for hot contraction heating,depainting,degluing,defrosting,Preheating and rubber soldering and so forth.
Specification:
Power Voltage: 110V
Plug type:US
Power consumption:700W
Blower fan :Brushless Fan
Amount of Wind:120L/m(MAX)
Temperature Range:100~500℃
Handle Length :120cm
Noises :<45db
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
