Auto Accessories Emergency Tool Power Jumper jumper cables / Extra long heavy duty car battery booster cables / Car jump leads

 Auto Emergency Tool Car Jumping Cable  Auto Car Booster Cable Battery Jumper Start Cable

 [Instructions for use]:

1. The connection procedure is as follows:

(1) Clamp the red wire of the starting cable directly on the red battery of the "rescued car".

(2) Then clamp the red wire at the other end directly above the red battery of the "rescue vehicle".

(3) Clamp the black wire on the black negative battery of the "rescued vehicle".

(4) Then clamp the black wire on the black negative battery of the "rescue vehicle".

(5) Start the engine of the "rescue vehicle" first, and then start the engine of the "rescue vehicle". If it is found that the rescued vehicle still cannot be started, Please check whether the metal contact part is in poor contact. Note: After you finish starting the engine, you still need to remove the starting wire in order, otherwise it may cause a short circuit.

2. The procedure for removing wires is as follows:

(1) Remove the black wire of "Rescued".

(2) Remove the black wire of the "rescue vehicle" again.

(3) Then remove the red wire of the "rescue vehicle".

(4) After that, remove the red wire of "Rescued". This 500A battery cable is packaged for export.

[Precautions]:

1. When the car cannot be started without electricity, it can be started from the battery of another vehicle. The thickened battery start line has a maximum current of 500AMP, which is generally suitable for use between gasoline engines with a displacement of less than 2500cc or diesel engine batteries with a displacement of less than 2000cc.

2. The two vehicles cannot have any contact, and the electronic systems of the two vehicles must have the same voltage. If the battery freezes, please do not use this starter cord.