Exterior Glass Railings, Glass Balcony Guardrails Stair Railing Pillars Guardrail For Balcony Using

1. A : Sliding, Outward-opening, Inward-opening and Inner tilt, up-hanging/down-hanging and Invert translating. how to choose among these opening modes?
    Q : Each has its own advantages and should be selected according to their own needs.

Sliding window: simple and elegant ,affordable but comes with poor sealing performance and short service life;

Outward opening window: The performance is better than the sliding window in all aspects,The only drawback is the price,it’s more expensive than the sliding window;
Inward-opening and inner tilt windows: the best humanized opening mode, especially for floor-to-ceiling windows, which have natural advantages, but are relatively expensive;
Top-hung/bottom-hung windows: The opening mode windows occupies less space and was widely used in places where the installation position is limited, such as kitchens and bathrooms.
Invert translating window:High sealing performance, save space, but the technology is immature, also with high subsequent maintenance risk.

2. A : What is Thermal Break Aluminum Window? What are the advantages over ordinary aluminum alloy windows ?
Q: Thermal break aluminum doors and windows refer to windows made of heat-insulating thermal break aluminum profiles. The so-called heat-insulating broken bridge aluminum, In layman's terms, is to disconnect the aluminum material from the middle and connect it with heat-insulating strips (bridges of broken bridges) to form a new heat-insulating profile. Compared with ordinary aluminum doors and windows, It has the following two advantages :
Better performance: Because there’s a heat insulation strip in the middle of the heat-insulating thermal break aluminum profile for blocking, the thermal conductivity was greatly reduced, The whole window performance including heat reservation, heat insulation, and soundproofing, etc would be highly improved installed with double-layer (or three layers) insulation Glass.
Avoid condensation : As the inner and surface temperature of the profile is close to the indoor temperature, condensation can be well
avoided.
Rich colors: For traditional aluminum profiles, inner and outer color should be the same as they are one profile . For
Thermal break aluminum,The inner and outer profiles are different ,so the color can be different inside and outside, so as to ensure the same color with exterior wall of entire community.

3. A: What’s your brand ? Is it a factory?
Q : Greensee Doors & Windows Curtain Walls Co.,ltd focus on manufacturing Thermal break aluminum alloy Doors, Windows,Curtain Walls,Glass balustrades and Glass Awning for 22 years. We have independently research and develop more than ten generations of products with experience precipitation. We serves for more than 5 million high-quality families each year. We are one of the largest production base of Aluminum doors,windows,curtain walls,glass balustrades and Awning in China mainland, Our factory covers an area of 50 acres with 13,000 square meters of large-span steel structure standard workshop . The annual capacity exceeds one million square meters of thermal break aluminum alloy doors,windows,curtain walls,glass balustrades and awning. We are one of the ten top factories which integrate high quality doors and windows hardware resources.And widely recognized by professional buyers in mainland China such as Vanke,Long and many other top real estate buyers with high-quality products and professional service.

4. A : How about the logistics packaging? How to ensure the original integrality of the products especially Glass during the transportation?
Q: In order to ensure that the products delivered to consumers in good condition, we do five fold protection for our products.
(1) The profile protection: The front and back side of the profile were protected by film;
(2)The overall frame protection: the frame was fully protected with thickened pearl cotton and wrapping film;
(3) The handle protection: The handle comes in individually box, and protected with a special protective cover;
(4 ) Glass protection: we support double protection of the glass, one is for corner protection, the other is for film;
(5) transportation and packing protection: the products would be packaged with wooden boxes to make sure the undamaged property to our customers.

5. What are the matters should not be ignored about the protection of finished products?
Q: First, Do not use hard objects such as steel wool to wipe the windows;

Second, Do not pull the handle and turn on the sash or screen sash;

Third,Do not use acidic or alkaline detergents to clean windows and hardware;

Fourth,Do not use sharp objects such as knives to cut the surface of the sash or profile;

Fifth,Do not approach or burn the sash with fire;

Sixth,Do not strike the glass vigorously.