cheap 1000kg 2000kg 5000kg aluminum iron copper high efficiency induction furnace for melting metals
- Category: >>>
- Supplier: Dalian Mingcheng Industry Co. Ltd.
Share on (1601005241405):
Product Overview
Description
Contacts: Belinda Sun
Tel: +86-411-82766928
Fax: +86-411-39015062
Email: lorik@mingchenggroup.com
Mob/Whatsapp: +86 155 4231 8526
Tel: +86-411-82766928
Fax: +86-411-39015062
Email: lorik@mingchenggroup.com
Mob/Whatsapp: +86 155 4231 8526
Products Description
Gas Molten Aluminum Alloy Holding Furnace
The purpose of this equipment is to keep the liquid aluminum alloy melt temperature, the best design operating temperature is 660~720 ℃, and the highest temperature is under 1000 ℃.
This furnace's heating source is flat flame type gas burning machine (with a flue gas recycling preheating device), Flat flame gas machine mounted on the rooftop, above liquid aluminum, radiation area is large, and the heating effects better (the temperature of the molten liquid into the furnace must not lower than the operating temperature).
The aluminum profile aging furnace is composed of a furnace shell, furnace lining, trolley, trolley traveling mechanism, heating element, furnace door, and other major components.
The temperature of the electric furnace is controlled through a special control cabinet and instrument indication. The furnace lining adopts a full-fiber structure, so it has the characteristics of small empty furnace loss, fast heating, low surface temperature, and a good energy-saving effect.
Working Principle
Name: Liquid Aluminum Electric Furnace
Brand: MC
Original: China
Name: Liquid Aluminum Electric Furnace
Brand: MC
Original: China
Use the feeding bin to feed the material, so that the items are melted, the exhaust gas is upward, and the heat recovery is increased.
The heat of the top burner is absorbed during melting to provide heat for the insulation of the insulation room, and the heat preservation waste heat enters adds materials, and stays in the furnace while melting.
The heat of the top burner is absorbed during melting to provide heat for the insulation of the insulation room, and the heat preservation waste heat enters adds materials, and stays in the furnace while melting.
Structure
Name: Liquid Aluminum Electric FurnaceBrand: MC
Original: China
Commonly used circular aluminum liquid holding furnace specifications are 3T, 5T, 6T, 8T, 10T, 12T, 15T, 18T, 20T, and 25T, and can be designed according to the special requirements of users.
Range of Work
Name: Liquid Aluminum Electric FurnaceBrand: MC
Original: China
This equipment is used to melt aluminum ingots, and provide aluminum water, and is also used in aluminum, zinc alloy die-casting, aluminum alloy gravity casting, auto parts manufacturing, and other fields.
Range of Work
Name: Gas Molten Aluminum Alloy Holding FurnaceBrand: MC
Original: China
The aluminum alloy pool-type gas holding furnace is specially used for heat preservation of aluminum water at the side of the die-casting machine and can be equipped with processes such as die-casting machine, centrifugal casting, gravity casting, and precision casting.
Product Paramenters
SPECIFICATIONS FOR LIQUID ALUMINUM HOLDING FURNACE | ||
Furnace use | Aluminum liquid heat preservation and inclined liquid discharge | |
Furnace form | Molten pool type side feeding, inclined liquid electric heating furnace | |
Rated power | 200kw | |
Rated temperature | 850°C | |
Melting pool capacity | 8t (aluminum) | |
Melting pool size | 3.6×2.4×0.5m (length×width×depth) | |
Effective area of table | L-R (mm) | |
Recommend Products
Company Profile
Our Service
Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Sample testing support.
* View our Factory.
After-Sales Service
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
* Engineers available to service machinery overseas.
Product packaging
Packaging | ||
Size | 360 (L) * 240 (W) * 50 (D) | |
Weight | 10 T | |
The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request. | ||
Contact Us
Contacts: Belinda Sun
Tel: +86-411-82766928
Fax: +86-411-39015062
Email: lorik@mingchenggroup.com
Mob/Whatsapp: +86 155 4231 8526
Tel: +86-411-82766928
Fax: +86-411-39015062
Email: lorik@mingchenggroup.com
Mob/Whatsapp: +86 155 4231 8526
FAQ
1.Does your company accept customized offer, we have special need.
MC is a company that focuses on research and manufacture of modular cnc machines. We have a very rich experience and strong machine tool research and development capability. We are very willing to offer you customized highly-efficient equipment as long as you have certain amount of needs.
2.What certificate the machine in your company get?
We’ve passed the ISO9001 Quality System Approval and CE Certification.
3.Do you have price list for optional configuration?
We have various configurations and so many different specifications, so we can’t offer you price list. Please contact our sales engineer if you’re interested in certain specific configuration.
4.Does your company accept CIF price?
CIF price includes shipping cost of cnc machine which needs to quote according to the different destination port and various in different months. Please contact us when you have such need.CIF price also includes marine premium which is 2‰ of 1.1*total amount.
5.If your engineer come to our country to fix the machine and do some training, how much will it cost?
The cost mainly contain the cost of round-trip flight tickets, board and lodging as well as v isa fee. Staff cost is
100USD/day/person, normally, it’s a two person job. But it will depends for a large equipment or installation and debugging of the whole line.
6.What’s the warranty?
Warranty is 12 months which begins from the day when the machine has arrived at the importer’s port.
7.What’s your methods of transportation?
For most countries, we will transport our machine by sea, as for inland countries, we may use railway or highway transportation.Exported cnc machine is all be packed by wooden case which can be fixed into a 40 HQ.
8.If the machine is out-of-warranty, how to charge the cost of accessories?
For the out of warranty machine which needs to replacement parts, we will charge according to the parts quotation. If you have any questions, please email us for consultation.
9.What I would do for the machine failure?
If the machine malfunction and users are unable to resolve, please email us for consultation. Our service department will respond within 24 hours.
10.How to define the machine warranty? When did you start timing?
We identify the warranty based on the factory number. Warranty timing counted starting after equipment commissioning and acceptance. If you have any questions, please email us for consultation.
11.How long is the warranty period of machine tool?
We commitment to client machines are one-year warranty. For the purchase of the user, registered as a member in this website,with the factory number of the machine, you can enjoy extended warranty of 3 months. For details, please refer to membership service.
12.Does MC have maintenance manual and operation manual?
Each cnc machine leaving the factory will be along with related series or model the English instructions including maintenance manual and operation manual. Attached documentations may also include cnc controller instruction, parts instruction you bought(like rotaty table, oil cooler)
MC is a company that focuses on research and manufacture of modular cnc machines. We have a very rich experience and strong machine tool research and development capability. We are very willing to offer you customized highly-efficient equipment as long as you have certain amount of needs.
2.What certificate the machine in your company get?
We’ve passed the ISO9001 Quality System Approval and CE Certification.
3.Do you have price list for optional configuration?
We have various configurations and so many different specifications, so we can’t offer you price list. Please contact our sales engineer if you’re interested in certain specific configuration.
4.Does your company accept CIF price?
CIF price includes shipping cost of cnc machine which needs to quote according to the different destination port and various in different months. Please contact us when you have such need.CIF price also includes marine premium which is 2‰ of 1.1*total amount.
5.If your engineer come to our country to fix the machine and do some training, how much will it cost?
The cost mainly contain the cost of round-trip flight tickets, board and lodging as well as v isa fee. Staff cost is
100USD/day/person, normally, it’s a two person job. But it will depends for a large equipment or installation and debugging of the whole line.
6.What’s the warranty?
Warranty is 12 months which begins from the day when the machine has arrived at the importer’s port.
7.What’s your methods of transportation?
For most countries, we will transport our machine by sea, as for inland countries, we may use railway or highway transportation.Exported cnc machine is all be packed by wooden case which can be fixed into a 40 HQ.
8.If the machine is out-of-warranty, how to charge the cost of accessories?
For the out of warranty machine which needs to replacement parts, we will charge according to the parts quotation. If you have any questions, please email us for consultation.
9.What I would do for the machine failure?
If the machine malfunction and users are unable to resolve, please email us for consultation. Our service department will respond within 24 hours.
10.How to define the machine warranty? When did you start timing?
We identify the warranty based on the factory number. Warranty timing counted starting after equipment commissioning and acceptance. If you have any questions, please email us for consultation.
11.How long is the warranty period of machine tool?
We commitment to client machines are one-year warranty. For the purchase of the user, registered as a member in this website,with the factory number of the machine, you can enjoy extended warranty of 3 months. For details, please refer to membership service.
12.Does MC have maintenance manual and operation manual?
Each cnc machine leaving the factory will be along with related series or model the English instructions including maintenance manual and operation manual. Attached documentations may also include cnc controller instruction, parts instruction you bought(like rotaty table, oil cooler)
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
