Central Type Dust Vacuum Cleaner Cartridge Filter Dust Collector/Industrial Dust Collector Cyclone
- Category: >>>
- Supplier: Qingdao DEER Environmental Protection Technology Co. LtdQingdao Ltd
Share on (1601005433085):
Product Overview
Description
Products Description
DER-PE series filter cartridge dust collector
PE series dust collector provides perfect solution for different smoke and dust. PE series split-type smoke and dust collection purifier has compact structure, reasonable design, large air exhaust volume, and can be placed indoors or outdoors.
PE series split-type dust purifier and fan adopt split-type combination, which can be equipped with a variety of collection devices for large-scale welding,the smoke and dust from grinding and cutting.
We can design the best suitable smoke and dust collection system according to different site working condition.
PE series split-type dust purifier and fan adopt split-type combination, which can be equipped with a variety of collection devices for large-scale welding,the smoke and dust from grinding and cutting.
We can design the best suitable smoke and dust collection system according to different site working condition.
Application
This series of dust collector are suitable for different welding (arc welding, carbon dioxide protection welding, MAG welding, carbon arc air gouging welding, gas fusion welding and special welding etc.) the produced smoke and dust from polishing, cutting and grinding/burnishing and other places, and recycling for the rare metals and precious materials.
Dust collection Way: EXTRACTION ARM
Reasonable way of dust collection is the key to smoke purification system, must adapt to the actual working condition of dust collection way.
The commonly used manual welding smoke and dust collection methods including suction arm, environmental protection welding torch, dust cover and so on;
The commonly used manual welding smoke and dust collection methods including suction arm, environmental protection welding torch, dust cover and so on;
Commonly used way of robot welding smoke and dust collection, including robot welding room, dust cover and so on; In addition, the complex working conditions for large workshop welding smoke purification, overall ventilation dust removal may be adopted. The following is my company under various working conditions for dust collection case:
The introduction of the dust collection method
Among the dust collection method, from the source to collect smoke is the most effective way to collect, as long as the premise of site conditions allowed, we should first consider purification from the source.
We recommended the way of collecting dust suction arm, under the effect of smoke exhaust fan, the cover mouth of suction arm can produce uniform surface and negative pressure zone, before smoke spread, the dust collection process is finished. The extraction arm can rotate 360 °, hover at any position, flexible and convenient operation.
We recommended the way of collecting dust suction arm, under the effect of smoke exhaust fan, the cover mouth of suction arm can produce uniform surface and negative pressure zone, before smoke spread, the dust collection process is finished. The extraction arm can rotate 360 °, hover at any position, flexible and convenient operation.
Function characteristics:
1）Low emission concentration, can the filter the dust smaller than 0.2 um.
2）Good permeability, low gas resistance.
3）Soot is convenient, automatic dust clean; Ensure the continuity of production and efficiency.
4）Dust collection container is convenient to disassemble, compact connection with filter funnel, dust does not leak.
5）Filter cylinder surface is smooth, good waterproof and oil proof performance.
6）Vertical installation for filter cartridge, compared with the traditional series with filter cartridge lateral or oblique installation way, counter blowing clean more
2）Good permeability, low gas resistance.
3）Soot is convenient, automatic dust clean; Ensure the continuity of production and efficiency.
4）Dust collection container is convenient to disassemble, compact connection with filter funnel, dust does not leak.
5）Filter cylinder surface is smooth, good waterproof and oil proof performance.
6）Vertical installation for filter cartridge, compared with the traditional series with filter cartridge lateral or oblique installation way, counter blowing clean more
Model | Airflow(m³/h) | Cartridge filter Q'ty | Valve specification | Valve Q’ty | Dimension(mm) | Air inlet dia(mm) |
DER-PE12 | 12000-15000 | 12 | DMF-T-40 | 6 | 1960*1362*2770 | 550 |
DER-PE16 | 16000-20000 | 16 | DMF-T-40 | 8 | 1960*1960*2770 | 650 |
DER-PE20 | 21000-25000 | 20 | DMF-T-40 | 10 | 1960*1960*2770 | 700 |
DER-PE24 | 24000-30000 | 24 | DMF-T-40 | 12 | 3920*1362*2770 | 750 |
DER-PE32 | 32000-40000 | 32 | DMF-T-40 | 16 | 3920*1960*2770 | 850 |
DER-PE40 | 41000-48000 | 40 | DMF-T-40 | 20 | 3920*1960*2770 | 900 |
DER-PE48 | 50000-57000 | 48 | DMF-T-40 | 24 | 5880*1960*2770 | 1000 |
DER-PE60 | 60000-70000 | 60 | DMF-T-40 | 30 | 5880*1960*2770 | 1200 |
The working principle of the dust collector
Dust gas into the filter housing through the lower inlet, from down to up, due to the effect of gravity and downdraughts, the larger dust particles down to inside the ash hopper directly, the tiny dust was capture on the surface of the filter cartridge, the clean gas purification by filter cartridge filter, through the filter tube center into the clean room, then exhaust out.
With filter conditions continue, the dust gathered on the surface of the filter cartridge more and more, the pulse controller according to the set of pulse cycle and pulse interval control solenoid valve open, jet high pressure gas, blow into the filter cylinder cavity, shake off the appearance dust, fall into the ash hopper.
With filter conditions continue, the dust gathered on the surface of the filter cartridge more and more, the pulse controller according to the set of pulse cycle and pulse interval control solenoid valve open, jet high pressure gas, blow into the filter cylinder cavity, shake off the appearance dust, fall into the ash hopper.
Performance characteristics of the cartridge filter:
1. The filter material used flexure, layout density, dust collector structure is compact, small size, filter material toughness.
2. Cartridge height is small, easy installation, use small maintenance workload.
2. Cartridge height is small, easy installation, use small maintenance workload.
3.With filter filtration area is relatively large volume, filtering wind speed is small, the resistance is not big.
4.The filter material sealing strictly on both ends of the flexure, not leak, good sealing effect.
4.The filter material sealing strictly on both ends of the flexure, not leak, good sealing effect.
Automatically Clean for Cartridge Filter
Cartridge cleaning by blowing device controlled by the pulse controller implementation: when the unit operation after a period of time, the subtle dust adsorption on the surface of the filter material, reduces the permeability of the filter material. At regular intervals by the pulse signal controller, control solenoid valve, clean compressed air spit out from the valve mouth; Adsorption on the surface of the filter material under the action of dust in the air is cleared, fall in the dust hopper at the bottom of the chamber body. Pulse injection should be 0.4 ~ 0.6 MPa cleaning compressed air and must remain in the operation of the continuous and constant air supplies.
We use vertical installation for filter cartridge, compared with the filter cartridge lateral or oblique installation way, counter blowing clean more thoroughly, more even, the following is a filter cylinder vertical loading and lateral blow effect comparison
Project case
Company Profile
Qingdao Deer Environmental Protection Technology Co., Ltd
Qingdao Deer Environmental Protection Technology Co., Ltd has insisted on scientific and technological progress and increased investment in science and technology. The company has 11 independent R&D patents, Shandong Environmental Pollution Control Qualification Certificate, ISO9001 Quality Management System Certificate, ISO14001 Environmental Management System Certificate,OHSAS18001 Occupational Health and Safety Management System Certificate, High-tech Enterprise Certificate, etc.
Qingdao Deer Environmental Protection Technology Co., Ltd has established friendly strategic cooperative relations with famous domestic research institutes and design institutes and is
supported by a technical team of professors with solid theoretical knowledge and senior engineers with rich practical experience serves as the support, and constantly brings forth the new through the old according to the market demand.
supported by a technical team of professors with solid theoretical knowledge and senior engineers with rich practical experience serves as the support, and constantly brings forth the new through the old according to the market demand.
Contact us:
WECHAT:JUNO516
PHONE:+86 15865519554
QQ:986812685
EMAIL:JUNOLANG@QD-DEER.COM
Certifications
We Recommend
Furniture Factory Dust Removal Equipment Pulse Dust Collector
$4,500.00-5,300.00
Bag Dust Collector System Industrial air Filter Dedusting System
$8,720.00-8,800.00
New Arrivals
New products from manufacturers at wholesale prices
