Share on (1601013970141):

Model | EW-PIS1806F-4GE | ||
Interface | 4*10/100/1000Base-T PoE ports (Data/Power) 1*1000Base-T uplink RJ45 port (Data) 1*100/1000Base-X uplink SFP fiber slot port (Data) 2 set of V+, V- redundant DC power interface (5Pin Phoenix terminal) | ||
Ethernet Port | Port 1-4 support 10/100/1000Base-TX, auto-sensing, Full/half duplex MDI/MDI-X self-adaption | ||
Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-X, IIEEE802.3x | ||
PoE Standard | IEEE802.3af/at | ||
SFP Port | Gigabit SFP optical fiber port, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) | ||
Optical Cable | Multimode: 850nm 0 ~ 550M, single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM. | ||
Forwarding Mode | Store and Forward | ||
Switching Capacity | 12Gbps | ||
Forwarding Rate@64byte | 8.93Mpps | ||
MAC | 4K | ||
Buffer Memory | 1M | ||
Jumbo Frames | 10K | ||
MTBF | 100000 hours | ||
Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP (≤100 meter) 100BASE-TX: Cat5 or later UTP (≤100 meter) 1000BASE-T: Cat5e or later UTP (≤100 meter) | ||
Power Supply Pin | Default:1/2 (+), 3/6 (-) | 120W /48VDC | |
Working Voltage | 48-57VDC; 5P industrial phoenix terminal, anti-reverse protection. | Standby:<1W; Full load:<120W | |
Max Power Per Port | 30W; IEEE802.3af/at | ||
Total PWR / Input Voltage | 60W/48VDC (IEEE802.3af) | 120W/48VDC (IEEE802.3at) | |
Power Consumption | Standby:<2W; Full load:<60W | Standby:<2W; Full load:<120W | |
Power Supply | No, optional 48V/60W or 48V/120W industrial power supply | ||





New products from manufacturers at wholesale prices