bit 10 biocide 1,2 Benzisothiazolin 3 one
- Category: >>>
- Supplier: Ozzie Chemical (Dalian) Co. Ltd.
Share on (1601023358469):
Product Overview
Description
Product Description
bit 10 biocide 1,2-Benzisothiazolin-3-one
In-Can Preservation for Paints, Adhesives and Related Products
General
BIT-10 biocide is a broad spectrum microbicide for the preservation of industrial water-based products against the attack of microorganisms. The Composition of BIT-10 is 10% solution of 1,2-Benzisothiazolin-3-one.
BIT-10 is specifically recommended for the preservation of polymer emulsions, paints and coatings, adhesives, and printing inks.
Typical Properties
These properties are typical but do not constitute specifications
Item | Index |
Appearance | Clear amber liquid |
Active Ingredient | 10% |
pH (10% in water) | 9.0-14.0 |
Specific Gravity (g/ml) | 1.02-1.10at 25°C |
Temperature stability | Stable up to 50°C (for short periods up to 100°C depending on matrix) |
pH stability | Stable at pH 4 - 12 |
Product Benefits
1. Broad spectrum activity in high pH systems, controlling bacteria, fungi and yeasts.
2. Stable in the presence of amines.
3. Non specific mode of action, resulting in reduced microbial resistance potential.
4. Ease of handling due to its liquid form and good compatibility in most aqueous compositions.
5. Excellent performance with co-biocides like CMI/MI, bronopol or formaldehyde releasers, which allow performance enhancements and cost reduction.
6. The active ingredient is non-volatile and has a comparatively high heat stability which allows the incorporation in fluids which are still hot.
7. High purity active ingredient, made evident by its clear light colour.
Antimicrobial Properties
Used at recommended dose levels, BIT-10 biocide is effective against the following microorganisms:
Bacteria Mould
Pseudomonas aeruginosa Fusarium solani
Pseudomonas fluorescens Aspergilus niger
Pseudomonas putida Alternaria alternata
Escherichia coli Aureobasidium pullulans
Klebsiella pneumoniae Chaetomium globosum
Enterobacter cloacae
Citrobacter freundii
Proteus vulgaris
Staphylococcus aureus
Directions for Use
Below are some general dosing recommendations, however, it is recommended to do specific testing on the end product to determine optimal dose levels.
Product BIT-10%
(based on total weight of product)
Polymer Emulsions:
Polymer emulsions based on styrene 0.05 - 0.15%
acrylic, acrylic, butadiene, PVA and
styrene for various applications.
Emulsions paints and coatings 0.05 - 0.25%
Water based adhesives 0.05 - 0.25%
Printing Inks and fountain solutions 0.05 - 0.15%
Plasters 0.05 - 0.25%
Building materials such as caulks, 0.08 - 0.25%
sealants, grouts, spackling, ready-mix cement
and wallboard compounds, and tape joint compounds.
Oil recovery materials, such as drill muds,
packer fluids, and completion fluids, 0.05 - 0.15%
containing polysaccharide fluid loss control agents and/or thickeners
such as starch.
Secondary oil recovery injection water containing additives,
such as polymer or micellar/polymer waterfloods using thickeners 0.015 - 0.15%
such as xanthan gum.
Packing
25Kg per drum, 200Kg per drum or 1000Kg per IBC drum.
Packaging & Shipping
Our Services
Ozzie technical service laboratories provide a variety of sterilization efficiency tests which can help customers solve issues in regard to anti-corrosion, anti mildew, algae and sterilization problems.
Factory cleaning consultation and field support
Good production environment is an important prerequisite for quality assurance, Ozzie provides the following services:
1.Inspect the factory production environment and test the degree of contamination in the production process;
2.Help to establish a biological laboratory for testing of raw materials, water and sterile conditions of the finished product;
3.Complete test method;
4.To provide targeted lectures and training of technical personnel.
Physical and chemical analysis
1.Physical phase solubility experiment;
2.Chemical analysis;
3.Process support.
Company Information
Welcome to Ozzie Chemical(Dalian) Co.,Ltd.
Ozzie Chemical is the leading supplier of biocides in Aisa. We mainly produce isothiazolinone series biocides:CMIT/MIT,MIT, OIT, DCOIT,BIT. We create added value by appreciating the needs of our customers – with competitive and innovative solutions.
We provide best-in-class products, service and knowledge to our customers, including: Formulation Expertise, Preservation and Dry Film Fungicides,Water Treatment Chemistries, Sanitizing and Disinfection Chemistries, Regulatory and Toxicology Research Expertise. We create added value by appreciating the needs of our customers - with competitive and innovative solutions.
FAQ
Q: What’s your MOQ?
Q: How can I get a free sample?
Q: Can you manufacture the Customization product?
Q: What documents you provide?
Q: What is loading port?
Q: What is the payment terms? |
Contact
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
