Diesel Plastering Cement Mortar Spraying Machine with Pump and Motor New and Used with Good Price for Home Use construction cont
- Category: >>>
- Supplier: Xingtai Qiji Machinery Manufacturing Co. Ltd.
Share on (1601026353078):
Product Overview
Description
Product Description
The products are mainly used for building interior and exterior walls, cement mortar spraying, mortar spraying for exterior wall insulation materials, and refractory spraying. The mortar spraying machine basically has no floor ash, water and material, which can greatly reduce the cost, simple operation, no scaffolding, no mobile equipment, no repairing and stubble, both the male and female corners and the roof can be sprayed freely, with fast speed and high efficiency , Labor intensity is low, a spraying machine can easily spray an area of 150 square meters per hour.
The main disadvantages of the artificial whitewashed wall and the previously introduced whitewashed wall machine are the low adhesion between the mortar and the wall and the low density of the mortar, the large flow rate and high pressure of the spraying equipment, which overcomes the above defects, and the mortar density far exceeds the national standard. Avoid troubles caused by quality, construction period, labor cost and other issues.
The main disadvantages of the artificial whitewashed wall and the previously introduced whitewashed wall machine are the low adhesion between the mortar and the wall and the low density of the mortar, the large flow rate and high pressure of the spraying equipment, which overcomes the above defects, and the mortar density far exceeds the national standard. Avoid troubles caused by quality, construction period, labor cost and other issues.
One machine is multi-purpose, can spray mortar, waterproof coating, refractory materials, and is not affected by regional and environmental conditions and the shape of the spray surface.
Machine
Name: Mortar spraying machineBrand: QJ-511-12C
Original: CHINA
The machine is an electric screw type high-pressure mortar spraying machine with advanced technology, simple operation and
maintenance, and can be operated skillfully without special training.
The following advantages of using rapid mortar spraying:
1. There is basically no ground ash, saving water and materials, and can reduce the cost by more than 20%.
2. The operation is simple, no need to set up a hand frame, no need to move equipment, no need to repair the stubble, the yin and
yang corners, the roof, and all can be sprayed freely, which shortens the construction period, improves the progress, and saves
the cost of the frame material.
Mortar spraying machine parameter | ||
product brand | QIJI | |
The product name | QJ-511C mortar spraying machine | |
Voltage and power | 9KW | |
Engine | 12HP/18HP/25HP | |
Air compressor power | 2.2KW | |
Spray thickness | 2.-50mm | |
Conveying flow | 6 m3/h | |
Through the particles | <6mm | |
Conveying height | 10-20 M | |
Conveying length | 10-40M | |
Bucket capacity | 60L | |
Feeding way | Blender mixing materials | |
Applied materials | Mortar cement, etc. | |
Applicable environment | Rural/construction site/tunnel/home etc. | |
Dimensions | 1920*1000*1350mm | |
Total weight | 380KG | |
Detailed Images
Pure copper core motor
This machine adopts pure copper coil motor, with stable performance, long service life and no burning.
Large flow pump head, fast discharge, stable performance, quality assurance.
Main Features
With the traditional manual white wall, plaster and market before white wall machine performance compared to using rapid mortar spraying machine has the following advantages:
1. The little French grey, save water, save material, can reduce more than 20% of the cost.
2, the operation is simple, do not need scaffolding, don't have to mobile devices, need not repair the grounds, Yin and Yang are free to spray Angle, roof, shortening the time limit for a project, to improve the schedule, and section .About the frame material expenditures.
3, the high speed, high efficiency, low labor intensity, a sprayer (multi-function control) per hour can easily spray 150 ㎡,remove preparation time, work 8 hours a day calculations,Can be sprayed over 1000 ㎡, is equivalent to 20 skilled hard day of work.
4, small investment, large gains, if each every day (multi-function control) coating equipment coating 1000 ㎡, according to the market average of $4 per ㎡, remove the worker's wages of about 500 yuan, every day
Each device can be a profit of 3000 yuan, the removal of other factors, the annual income of 500000 yuan of above, are also expected.
With the traditional manual white wall, plaster and market before white wall machine performance compared to using rapid mortar spraying machine has the following advantages:
1. The little French grey, save water, save material, can reduce more than 20% of the cost.
2, the operation is simple, do not need scaffolding, don't have to mobile devices, need not repair the grounds, Yin and Yang are free to spray Angle, roof, shortening the time limit for a project, to improve the schedule, and section .About the frame material expenditures.
3, the high speed, high efficiency, low labor intensity, a sprayer (multi-function control) per hour can easily spray 150 ㎡,remove preparation time, work 8 hours a day calculations,Can be sprayed over 1000 ㎡, is equivalent to 20 skilled hard day of work.
4, small investment, large gains, if each every day (multi-function control) coating equipment coating 1000 ㎡, according to the market average of $4 per ㎡, remove the worker's wages of about 500 yuan, every day
Each device can be a profit of 3000 yuan, the removal of other factors, the annual income of 500000 yuan of above, are also expected.
Packing&Shipping
Company Introduction
We are a manufacturer and exporter specializing in the design, development and production of construction machinery products. The company is located in Xingtai City with convenient transportation. All our products comply with international quality standards and have passed CE, SGS and other EU certifications. Our products enjoy a good reputation among customers. We welcome friends from business associations around the world to contact us and seek mutually beneficial cooperation.
Our Services & Strength
Address; Fuyang Development Zone, Xingtai City, Hebei Province
FAQ
1.Are you manufacture？
ans：Yes, we have more than 15 years of professional manufacturing experience.
ans：Yes, we have more than 15 years of professional manufacturing experience.
2.what is your terms of payment?
ans：Payment terms support TT. credit card. Bank card. LC. Wait for customer service。
ans：Payment terms support TT. credit card. Bank card. LC. Wait for customer service。
3.what is your terms of delivery？
ans：EXW，FOB, CFR, CIF, DDP, DDU.
4.About delivery time？
ans：Shipped within 3-7 days after receiving payment. Except for customized models (you can contact customer service.
5What is the warranty of our machine？
ans：ans：The machine is guaranteed for 12 months and the main parts are guaranteed for 2 years.
6.Do you test att your goods before delivery？
ans：Products will be tested before delivery.
ans：EXW，FOB, CFR, CIF, DDP, DDU.
4.About delivery time？
ans：Shipped within 3-7 days after receiving payment. Except for customized models (you can contact customer service.
5What is the warranty of our machine？
ans：ans：The machine is guaranteed for 12 months and the main parts are guaranteed for 2 years.
6.Do you test att your goods before delivery？
ans：Products will be tested before delivery.
7.What is your terms of packing？
ans：Use fumigation-free wooden box.
ans：Use fumigation-free wooden box.
8.Do you Preferrde provide wear parts for transacted clients？
ans：We provide customers with wearing parts
ans：We provide customers with wearing parts
Contact us
Contact: Wendy/ Grace
wendy@qijijixie.com
008619133953992
https://www.facebook.com/Gracehuo68
We Recommend
X5 Concrete Plastering Spraying Machine with Pump and Motor Core Components
$3,300.00-3,800.00
Multi Functional Cement Plastering Machine Mortar Gypsum Putty Machines
$4,050.00-4,250.00
New Arrivals
New products from manufacturers at wholesale prices
