ROSIMITS New Traffic Detection System Work With Traffic Light controller

Product Overview

Description

Traffic detection system wireless magnetometer sensor for traffic  monitoring

 

(2).WAP-348x manages the network and collects data from all the sensors, and on the other hand, provides data interface to user traffic systems.

 

The traffic detection system accessory detail list

 

  

 Working principle

Wireless vehicle detector for car counting system is designed for pursuit of high efficiency and low cost traffic application systems .Based on magnetic detection and wireless networks, Wireless speed sensors acquire the dynamic traffic real-time data information and send through wireless channel to user traffic systems.

 

 

Installment:

1. wireless traffic sensor magnetic vehicle detector embed in the road

  

 

  
  

 

2.WAP connecting with SCATS controllers

 

 

ALL of the vehicles data will detected by WVD systems, The sensor manager screen shot as below:

 

 

 

 

Traffic signal controlling (the traffic lights can be auto-controlled with the change of traffic flow density) and red light enforcement

 

 

 

 

 

 

Travel detection system

 

 

 

 

 

a)  Install fast. It is only almost 6 minutes that is needed to install one wireless vehicle detector in the road, after installation, the traffic control could be released immediately;

b)  Work all-weather. Bad weather for example heavy fog, snow and rain makes no difference;

c)   No damage to the road. There’s no need to cut slots on the road surface and place cables or wires as the installation of loops, but only a tiny hole with the size Φ 120/H 100 mm, which makes WVDs become the most suitable vehicle detecting solution on the city high-way and bridges;

d)   About 10 years long life span. With high standard water proof and anti-press characteristics,  WVD wireless vehicle detector can even be used in the damaged or distorted roads where loops cannot be installed.

e)  Cost saving. You just can use the cement which is about $2 for 3-4 sensors.

f)   Easy to maintain. Unlike the loops that are easily to be damaged but difficultly to be repaired, WVD wireless vehicle detector supports firmware updating over the air. No need to re-cut the slots, no more materials needed, and all of what you need is to take almost 10 minutes for the devices wireless updating;

g)  Low operation consuming. Due to the ultra-low power design and battery supply solution, WVD wireless vehicle detector’s consumed power is very lower than any other detectors like loop detector, video, micro-wave etc. in the market. This appears more and more significantly to our environments;

h)  Replace loops seamlessly. The same installation position and compatible output signals makes it easily and simply to replace loops in  your system directly.

 

 

 

 

 Rosim ITS provides our customers high quality wireless vehicle detecting products and solutions, all the products support wireless updating, which makes it easily to maintain.

Web://www.rosimits.com

Lucy

Skype/Whatsapp/Tel:+86-18814277947

E-mail:lucy_ma at rosimits.com

Web:www.rosim-its.com