220V 50Hz or 110V 60Hz Dent Remover Free Painting Dent Repair Tool Induction Heater Iron Car Body Dents Repairing Tools
- Category: >>>
- Supplier: Wyco Technology Company Limited
Share on (1601040890314):
Product Overview
Description
Specification
ITEM | VALUE |
Place of Origin | China |
Guangdong | |
Warranty | 1 Years for whole device |
Product name | Car Body Dent Paintless Repair Machine |
Application | Automotive Repair Tools |
Size | 22 * 17 * 16cm |
Machine Weight: | 2.5 kg |
Input Voltage(v) | 110~220 V |
power frequency | 5-~60 Hz |
Power | 1000W |
Operating Voltage(v) | 5 V |
Power Factor | ≥0.95 |
Efficiency | ≥90% |
Cooling | Air-cooled |
Degree of Protection | IP23 |
Products Description
Feature:
1. Using the latest single-chip microcomputer program control technology to accurately control the working waveform;
2. The main components are equipped with original imported components to ensure product performance;
3. It can repair smooth dents without damaging the paint surface;
4. Suitable for smooth dents such as hail pits;
5. Fast repair and high work efficiency;
6. Low repair cost and quick results;
7. This product is a black single-adjustment screen display;
2. The main components are equipped with original imported components to ensure product performance;
3. It can repair smooth dents without damaging the paint surface;
4. Suitable for smooth dents such as hail pits;
5. Fast repair and high work efficiency;
6. Low repair cost and quick results;
7. This product is a black single-adjustment screen display;
Package List:
1× Metal Dent Repair Tool
1× Repair head
1× Power cable
1× Quick connection line
5× Repair the pen
1× Instruction manual
1× Repair head
1× Power cable
1× Quick connection line
5× Repair the pen
1× Instruction manual
Package List:
1× Metal Dent Repair Tool
1× Repair head
1× Power cable
1× Quick connection line
5× Repair the pen
1× Instruction manual
1× Repair head
1× Power cable
1× Quick connection line
5× Repair the pen
1× Instruction manual
Product Paramenters
Installing:
When installing, first confirm whether the voltage is consistent, plug in the power cord after the voltage is confirmed, and then insert the gray quick plug wire. One end of the wire is plugged into the corresponding socket on the machine panel, and the other end is inserted into the repair head socket. After the quick plug is inserted into the socket, turn it clockwise, then turn on the power switch to adjust the power and time, then you can repair it.
Note:
1. When using, please adjust the power to 60%-80%, time 1S~1.5S, and prepare a wet towel, practice
WARNING:
After the machine has been working continuously for about 20 minutes, it will overheat protection. At this
When installing, first confirm whether the voltage is consistent, plug in the power cord after the voltage is confirmed, and then insert the gray quick plug wire. One end of the wire is plugged into the corresponding socket on the machine panel, and the other end is inserted into the repair head socket. After the quick plug is inserted into the socket, turn it clockwise, then turn on the power switch to adjust the power and time, then you can repair it.
Note:
1. When using, please adjust the power to 60%-80%, time 1S~1.5S, and prepare a wet towel, practice
repeatedly to get the best repair effect
2. Wear protective mask, gloves and over-all suit to prevent burns. Do not keep metal objects with you,
2. Wear protective mask, gloves and over-all suit to prevent burns. Do not keep metal objects with you,
including watches, necklaces, rings, coins, zippers, etc.
3. Machine should not be used in areas of conductive dust, spaying work, chemical fuel work or places
3. Machine should not be used in areas of conductive dust, spaying work, chemical fuel work or places
with high temperature and humidity. Do not set combustible objects or air bags nearby
4. In the process of repairing damaged body, repair head and body will heat up rapidly. Do not touch before
4. In the process of repairing damaged body, repair head and body will heat up rapidly. Do not touch before
they’ve cooled
5. Only suitable for Iron car body
5. Only suitable for Iron car body
WARNING:
After the machine has been working continuously for about 20 minutes, it will overheat protection. At this
time,there is no output when the button is pressed. and the machine returns to standby: tick.....tick.....tick.....Please wait for about 10 minutes, the machine can resume working
Contact Us
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
