Industrial SUS Water to Air Heat Exchanger for Custom Cast Silicone Processing Line
- Category: >>>
- Supplier: Changzhou Vrcoolertech Refrigeration Co. Ltd.
Share on (1601057589124):
Product Overview
Description
Product description
1. Product Application
·A heat exchanger is an energy-saving device that transfers heat between materials at two or more fluids at different temperatures. It transfers heat from a higher temperature fluid to a lower temperature fluid, allowing the fluid temperature to reach the flow. Specified indicators to meet the needs of process conditions, but also one of the main equipment to improve energy efficiency.
The AHU coil is one of the most important parts of the air handling units. and over time there is a need for AHU Cooling Coil Replacement.
VRCoolertech offers a complete Replacement service for coils in existing air handling units or ducted systems.
AHU Coil is made up of copper tubing of several turns and covered with fins to increase the heat transfer efficiency of the AHU coil. Direct expansion (DX) coils, the most common coil type of AHU, are typically either a slab coil, an A-Coil, or an N-Coil with each coil serving its own purpose for configuration and heat exchange inside the air handler.
We provide custom solutions for hot and chilled water coils for your unique business requirements.
·Mainly concentrated in the fields of petroleum, chemical, metallurgy, electric power, shipbuilding, central heating, refrigeration and air conditioning, machinery, food, pharmaceuticals, etc.
·Our factory currently focuses on large heat exchangers for various industry.
VRCoolertech offers a complete Replacement service for coils in existing air handling units or ducted systems.
AHU Coil is made up of copper tubing of several turns and covered with fins to increase the heat transfer efficiency of the AHU coil. Direct expansion (DX) coils, the most common coil type of AHU, are typically either a slab coil, an A-Coil, or an N-Coil with each coil serving its own purpose for configuration and heat exchange inside the air handler.
We provide custom solutions for hot and chilled water coils for your unique business requirements.
·Mainly concentrated in the fields of petroleum, chemical, metallurgy, electric power, shipbuilding, central heating, refrigeration and air conditioning, machinery, food, pharmaceuticals, etc.
·Our factory currently focuses on large heat exchangers for various industry.
Stainless steel coils for AHU have the following advantages:
Corrosion resistance: stainless steel coils are corrosion resistant and can therefore be used in wet or corrosive environments, making them ideal for use in high humidity environments, seaside areas and industrial areas.
Long life: stainless steel coils have a long life span, therefore reducing the number of replacements and repairs, thus saving maintenance costs.
Clean and hygienic: stainless steel coils are easy to clean and maintain a high level of hygiene standards, making them ideal for use in hospitals, laboratories and the food processing industry.
Good heat transfer: stainless steel coils have good heat transfer properties and therefore provide a more efficient heat transfer function, making them ideal for applications where efficient heat transfer is required
Corrosion resistance: stainless steel coils are corrosion resistant and can therefore be used in wet or corrosive environments, making them ideal for use in high humidity environments, seaside areas and industrial areas.
Long life: stainless steel coils have a long life span, therefore reducing the number of replacements and repairs, thus saving maintenance costs.
Clean and hygienic: stainless steel coils are easy to clean and maintain a high level of hygiene standards, making them ideal for use in hospitals, laboratories and the food processing industry.
Good heat transfer: stainless steel coils have good heat transfer properties and therefore provide a more efficient heat transfer function, making them ideal for applications where efficient heat transfer is required
Details of materials
2. Raw Materials
TUBE | Copper | Titanium | Aluminum | Carbon steel |
Stainless steel 304 | Stainless steel 316 | Cu-Ni(90/10) | Cu-Ni(70/30) | |
FIN | Copper | Aluminum | Stainless steel | |
Carbon steel | Titanium | |||
FRAME | Galvanized | Aluminum | Stainless steel |
TUBES
We make tubes of different diameters, with a greater number of thicknesses and different materials such as copper, stainless steel and cupronickel. The tube expansion, during the flaring phase, allows a perfect contact between the tubes and the fins and as a consequence it assures efficient thermal exchange.
FINS
The fins, made of aluminium, prevarnished aluminium or copper, are pressed by means of a particular ondulation that increases the thermal exchange between the air and the fin reducing the load losses on the air side and encouraging at the same time the flow of condensation or defrosting water.
The fins can also be made from 316L stainless steel for installations where the thermal exchange is in aggressive environments such as the food sector or exchangers used in salty environments.
The main geometries, achievable according to the chosen material, are reported following below; besides, according to the application chosen by the customer and to the thickness of the requested strap, it will be possible to make a major or minor pitch between the fins.
The fins can also be made from 316L stainless steel for installations where the thermal exchange is in aggressive environments such as the food sector or exchangers used in salty environments.
The main geometries, achievable according to the chosen material, are reported following below; besides, according to the application chosen by the customer and to the thickness of the requested strap, it will be possible to make a major or minor pitch between the fins.
Engineering Data
We have customized products for many customers, following are some projects we did before.
We can provide designing data and production drawings.
We promise we use the design software sold by a well-known European HAVC software company.
Through 8 years of cooperation with them, we have designed, processed and exported dry coolers to various countries all around the world.
All of customers feedback is that the actual cooling performance is almost the same as the theoretical design value.
Through 8 years of cooperation with them, we have designed, processed and exported dry coolers to various countries all around the world.
All of customers feedback is that the actual cooling performance is almost the same as the theoretical design value.
Customer feedback photos
Russia Epoxy Coating Project
Thailand Chiller Project
New Zealand Tube Fin Evaporator
Italy AHU Cooling Coil
British Blygold Project
American Vacuum Chamber
Our Company
MORE THAN 15 YEARS OF SUCCESS
Changzhou Vrcoolertech Refrigeration Co.,Ltd specializes in researching, manufacturing and exporting Heat Exchangers, Evaporators, Condensers, air cooler and other heat transfer equipments for the varied industries since 2004.
OUR MISSION
We are committed to quality products and services to meet our customer's expectations and the needs of industrial. We are dedicated to our mission and goal and we believe in long term business relationship with our customers which is based on integrity, responsiveness and quality
A STRATEGIC LOCATION
Address: Qingsitang, Henglin Town, Wujin Dist, Changzhou, Jiangsu, China.
E-mail: info@vrcooler.com / keviny@vrcooler.com
Packing and delivery
The normal package is wooden box. If export to european countries,the wooden box will be fumigated.If container is too tighter,we will use pe film for packing or pack it according to customers special request.
FAQ
1.What is your delivery time?
20---30days.
2.What are the payment terms?
50% T/T before production and balance before shipment.
3.What is your warranty?
One year after shipping.
4.What is the valid time of the quotation?
30 days.
5.Can we do our OEM logo?
Yes, we can do OEM logo for you.
20---30days.
2.What are the payment terms?
50% T/T before production and balance before shipment.
3.What is your warranty?
One year after shipping.
4.What is the valid time of the quotation?
30 days.
5.Can we do our OEM logo?
Yes, we can do OEM logo for you.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
