Ni Mo Catalyst for Diesel Hydrofining High Hydrodesulfurization Activity Sulfur Removal Catalyst
- Category: >>>
- Supplier: Shandong Dengzhuo Chemical Co. Ltd.
Share on (1601062089170):
Product Overview
Description
Products Description
Brief Introduction
HDS-Y312 diesel hydrofining catalyst was prepared by Co-impregnation Method with g-Al2O3 as carrier and Mo and Ni as active components. It has more type II active sites and hydrodesulfurization activity for refractory sulfides. The catalyst is suitable for the hydrofining of coking diesel oil, straight-run diesel oil, catalytic diesel oil, coking gasoline and their blends.
Specification
Model | HDS-Y312 |
Appearance | Light yellow trilobe |
Size(mm) | Φ1.0-1.2×2-9 |
Specific surface area(m2/g) | ＞175 |
Pore volume (ml/g) | ＞0.34 |
Average crushing strength(N/cm) | ＞150 |
Bulk density (g/ml) | 0.69~0.81 |
Active component (wt%) | NiO：＞3.8 |
MoO3：＞20.0 |
Operation Conditions
Raw materials: straight-run diesel, coking diesel, catalytic diesel, coking gasoline and its blended oil
Operation pressure：4.0～15.0Mpa
Operation temperature：260～400℃
LHSV：1.0～2.8h－1
Raw materials: straight-run diesel, coking diesel, catalytic diesel, coking gasoline and its blended oil
Operation pressure：4.0～15.0Mpa
Operation temperature：260～400℃
LHSV：1.0～2.8h－1
Package & Transport
Company Profile
Shandong Dengzhuo Chemical Co., Ltd, with an area of 66,000 square meters, is specialized in the study and production of catalysts and molecular sieves, like Methanol Synthesis Catalyst, Ammonia Synthesis Catalyst and Steam Reforming Catalyst, FCC catalyst, FCC additives, and aluminum sol，etc. Our factory has an area of 3000 square meters of R&D Center, including technology development, FCC catalyst performance evaluation, analytic laboratory, and crude oil analysis laboratory.
Certifications
FAQ
Q1: What is your MOQ?
Typically, MOQ is 1 kilogram, which varies with different products.
Q2: How much is the shipping cost?
Shipping costs vary depending on your specific address and shipping method, please consult us for details.
Q3: What is the average lead time?
For samples, the lead time would be about 5 working days. For mass production, the lead time would be 15-30 working days after receiving the deposit payment. The lead times become effective when we have received your deposit.
Q4: What trade terms and payment methods do you support?
Typically, we collect payments through TT, wire transfer, Western Union, etc. However, the specific cooperation methods can be negotiated amicably by both parties.
Q5: How can you guarantee quality?
Usually, there are pre-test materials before mass production; There will be a final inspection before shipment.
Typically, MOQ is 1 kilogram, which varies with different products.
Q2: How much is the shipping cost?
Shipping costs vary depending on your specific address and shipping method, please consult us for details.
Q3: What is the average lead time?
For samples, the lead time would be about 5 working days. For mass production, the lead time would be 15-30 working days after receiving the deposit payment. The lead times become effective when we have received your deposit.
Q4: What trade terms and payment methods do you support?
Typically, we collect payments through TT, wire transfer, Western Union, etc. However, the specific cooperation methods can be negotiated amicably by both parties.
Q5: How can you guarantee quality?
Usually, there are pre-test materials before mass production; There will be a final inspection before shipment.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
