gel battery 12v 300ah 200ah lead acid battery

1.Converters

2.Medical Electronic Equipment

3.Ups

4.Transformer Substation,Switch Control And Accident Lighting  

5.Automobile And Vessel Starting Application

6.Fire Protecting And Safety Alarm Inspection

7.Oas System

8.Wireless Telecommunication System

9.Emergency Lighting

10.Portable Electronic Equipment And Mining System

11.Traffic And Navigation Mark Signal Lamp

Application and Maintenance

1.When cyclic charging the battery, voltage id 14.7V-14.8V per cell. It should be recharged in time after discharging with initial current not more than 0.2C(A) over 12 hours. Charging voltage should be 13.65V±0.05V per cell of float charging application and this action should be kept for long time in order to retain enough electricity.

2.Avoid upside down or charging and using in a sealed container.

3.Keep away from sparks and using in a sealed container.

4.Prevent from over discharging. It should be recharged immediately if so happens. Or it would badly effects battery capacity and service life. Terminated voltage should not be less than 9.6V per cell.

5.Keep in ventilated place since it’s well charged before delivery. Recharging one time after 6 months storage.

Red is positive terminal, while black is negative terminal.

Wrong connection/short circuit is forbidden when storing and using.

Tightening the connection parts when installing to use.

Avoid bad connection and ruin the terminals.

Note:Please contact us for technical brochures for correct using guidance and technical information.