Best choice optimal nair photo emulsion YT-1080
US $27.00-$60.00
Platen Masking Screen Printing Pallet Tape for Screen Printing Materials
- Category: >>>
- Supplier: Hebei Hanze International Trade Co. Ltd.
Share on (1601097567990):
Product Overview
Description
Product Description
Screen Printing Pallet tape for Pallet Masking
Hanze Ltd supply premium self-adhesive platen tape for use on print surfaces of textile screen printing equipment. The pallet platen tape is constructed with white translucent saturated paper and water based natural rubber adhesive,which is designed specifically as the protector for textile printing pallets from ink spills,leaks,spray adhesives ans so on.
Advantage:
Easy to Laminate:Good in adhesive,No re-laminated,Cutting is simple, not curl.
Easy to Remove:Tear off in complete piece,Easy to replace, no wastage Protect platen, reduce the solvent damage.
High temperature:High temperature conditions, still maintain its performance, Over the printing oven, will not blister. Durable:When there is cloth, wipe it When using the same positioning, do not replace.
Clean:Imported parchment and natural rubber, no residue, No need to clean the platen, save labor, Improve work
efficiency, reduce time costs.
High temperature:High temperature conditions, still maintain its performance, Over the printing oven, will not blister. Durable:When there is cloth, wipe it When using the same positioning, do not replace.
Clean:Imported parchment and natural rubber, no residue, No need to clean the platen, save labor, Improve work
efficiency, reduce time costs.
Specification
Adhesion | 400-700 (g/25mm) |
Base Weight | 70±3(g/㎡) |
Tensile strength(kg/cm) | Horizontal≥3.0;Vertical≥4.0 |
Tear strength(mN) | Horizontal≥600;Vertical≥500 |
Product process
Step 1
Make sure the platens are clean before applying the platen masking tape.
Step 2
Apply the tape from the back with the sticky side down. Cut at the top of the platen.
Step 3
Use the squeegee to slowly stick the tape to the platen ensuring there are no air bubbles. If you get an air bubble you can pull off and do again.
Step 4
Use a sharp knife to poke a hole in any remaining air bubbles and press down to smooth out.
Step 5
Mark on the tape before apply your adhesive spray.
Step 6
Just remove the tape and it keeps your platen always clean.
Application
Pallet tape designed for use in textile Screen Printing to protect the platens from spray adhesive build-up. Eliminates the need for costly solvents and rag disposal. Apply to all kinds of printing machine (oval printing machine, octopus printing
machine,etc.), as the cutting piece positioning. Can also be used for hand-printed platen, embroidery platen positioning.
machine,etc.), as the cutting piece positioning. Can also be used for hand-printed platen, embroidery platen positioning.
Packing and Delivery
Common Specification:
Width in Inch:12”,14”,16”,18”,20”,22”,24”,26”,28”,30”,32”...Max 48” or 52”
Width in Inch:12”,14”,16”,18”,20”,22”,24”,26”,28”,30”,32”...Max 48” or 52”
Width in centimeter:35 cm,40cm,45 cm,50 cm,55 cm,60cm,65 cm,70 cm....Max 120 cm or 1320 mm
Roll Length:50 meters per roll,100 meters per roll,100 yards per roll
For other special specifications can provide cutting
Storage
Do not transport or store with volatile organic solvents, avoid direct sunlight, rain. It should be stored at a temperature of 10℃ to 30℃ and a humidity of 40% to 70%. Buy for the best performance within 6 months after purchase. Storage, the platen mask should be placed, so as not to crush.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
