Factory Direct Sale Anionic Cationic Nonionic Polyacrylamide PAM Powder For Printing And Dyeing Industry
- Category: >>>
- Supplier: Henan Saifu Trading Co. Ltd.
Share on (1601154464255):
Product Overview
Description
Products Description
Water Treatment Polyacrylamide
Polyacrylamide referred to as PAM, is a linear polymer and one of the most widely used water-soluble polymer compounds. Polyacrylamide and its derivatives can be used as effective flocculants, thickeners, papermaking enhancers and liquid drag-reducing agents, etc., and are widely used in water treatment, papermaking, petroleum, coal, mining and metallurgy, geology, textiles, construction and other industries. department. It is insoluble in most mailing solvents and has good flocculation properties, which can reduce the frictional resistance between liquids. According to ionic properties, it can be divided into three types: cationic, anionic and nonionic.
Cationic Polyacrylamide
Cationic Polyacrylamide is Flocculant. It is a linear polymer dissolved in water. Molecular weights range from 6 million to 12 million. Mainly used for sewage treatment.
Anionic Polyacrylamide
Anionic Polyacrylamide is polymer. It dissolves in water. The molecular weight is about 18 million. It is mainly used to treat industrial waste water.
Nonionic Polyacrylamide
Nonionic Polyacrylamid is a type of Polyacrylamide. The degree of hydrolysis is between 0 and 5. And it is mainly used for oil well fluid, and acidic waste water treatment.
Poduct Name | Cationic Polyacrylamide | Anionic Polyacrylamide | Nonionic Polyacrylamide | ||
Appearance | White Powder/Granule | White Powder/Granule | White Powder/Granule | ||
Ion Degree | 5%~60% | / | / | ||
Hydrolysis Degree | / | 15%~30% | 0~5% | ||
Solid Content | ≥90% | ≥90% | ≥90% | ||
Dissolution Time | ≤90 minutes | ≤90 minutes | ≤90 minutes | ||
Polyacrylamide Application
Application in sewage treatment
Adding polyacrylamide before sludge dewatering can produce larger flocculation mass, which is not easy to disperse during pressure filtration and has high dewatering efficiency.
Application in oil extraction
Polyacrylamide is used as lubricant, suspending agent, clay stabilizer, oil displacing agent, water loss agent and thickening agent in drilling, acidizing, fracturing, water plugging, cementing and secondary oil recovery and tertiary oil recovery. Polyacrylamide has a wide range of uses and is an extremely important oilfield chemical.
Applied in industrial wastewater purification
In the industrial field, it can be used to treat waste water and circulating water produced by enterprises, and the purified water can be recycled again.
Applied in papermaking
As a retention aid in the paper industry, it can increase the retention rate of fillers and fine fibers; as a filter aid, it can make the slurry flocculate and accelerate the filtration of the wet paper layer in the paper machine mesh.
Usage of Polyacrylamide
1. Polyacrylamide cannot be put directly into sewage and should be dissolved in water before use.
2. The dissolved water must be clean and cannot be heated, but the temperature cannot be too cold. The temperature is above five degrees Celsius. Otherwise, it will dissolve very slowly. Temperatures higher than 40 degrees Celsius will affect the use effect.
3. Note: Do not use strong acids, strong alkalis, or high salt water to prepare.
4. The recommended proportion range is between 0.1% and 0.3%. For example, add 1 to 3 grams of medicine to 1 liter of water.
5. If the dispersion is not good for other reasons, it is recommended that you mix it thinner.
6. The water is warm in summer, cationic and anionic polyacrylamide should be placed strictly for about 1 hour. Non-ionic polyacrylamide should be left strictly for about 2 hours.
7. When water-cooled in winter, cationic and anionic polyacrylamide should be soaked strictly for about 1 and a half hours. Non-ionic polyacrylamide should be stored strictly for about 3 hours.
2. The dissolved water must be clean and cannot be heated, but the temperature cannot be too cold. The temperature is above five degrees Celsius. Otherwise, it will dissolve very slowly. Temperatures higher than 40 degrees Celsius will affect the use effect.
3. Note: Do not use strong acids, strong alkalis, or high salt water to prepare.
4. The recommended proportion range is between 0.1% and 0.3%. For example, add 1 to 3 grams of medicine to 1 liter of water.
5. If the dispersion is not good for other reasons, it is recommended that you mix it thinner.
6. The water is warm in summer, cationic and anionic polyacrylamide should be placed strictly for about 1 hour. Non-ionic polyacrylamide should be left strictly for about 2 hours.
7. When water-cooled in winter, cationic and anionic polyacrylamide should be soaked strictly for about 1 and a half hours. Non-ionic polyacrylamide should be stored strictly for about 3 hours.
Product packaging
Polyacrylamide is usually packed in 25kg, pp bags or paper plastic composite bags. Of course, we mainly focus on customers, packaging according to customer's requirements.
Company Profile
Certifications
Foreign Visitors
FAQ
Q1: Can I get free samples?
We can provide you with a certain number of free samples, please contact us directly.
Q2: How to get the price of PAM?
Please provide us with accurate quantity, packaging, destination port and other necessary information. We will send you a quote based on your specific requirements.
Q3: I'm not sure if your product is suitable for my situation, what should I do?
The best way is that we can provide you with a certain quantity (under 5 kg) of samples for free according to your usage. If you think it will satisfy you, we will give you a quote. Then you can place your order.
Q4: I'm a small wholesaler, do you accept small orders for cationic polyacrylamide?
If you are a small wholesaler, no problem. We would like to grow with you.
Q5: How to use PAM?
We have product details. If you are still not sure, please contact us freely.
We can provide you with a certain number of free samples, please contact us directly.
Q2: How to get the price of PAM?
Please provide us with accurate quantity, packaging, destination port and other necessary information. We will send you a quote based on your specific requirements.
Q3: I'm not sure if your product is suitable for my situation, what should I do?
The best way is that we can provide you with a certain quantity (under 5 kg) of samples for free according to your usage. If you think it will satisfy you, we will give you a quote. Then you can place your order.
Q4: I'm a small wholesaler, do you accept small orders for cationic polyacrylamide?
If you are a small wholesaler, no problem. We would like to grow with you.
Q5: How to use PAM?
We have product details. If you are still not sure, please contact us freely.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
