High Quality Guangdong Dental Chair Tooth Treatment
- Category: >>>
- Supplier: Nanjing SUNORO Medical Equipment Co. Ltd.
Share on (1601162968037):
Product Overview
Description
Product Description
High Quality Guangdong Dental Chair Tooth Treatment
Specification
Power supply:
Electrical supply: 220V/AC（110V/AC）/50/60HZ
Water supply:0.2—0.40MPa/2.0-4.0bar;4L/min
Air supply:0.55-080 Mpa ;70L/min
Master switch for air / water / electricity supply
Focus sign\tNo\tSpecific
※\t1\tIntegral patient seat lift frame and base plate, sanitary PU foot pad
※\t2\tIntegral stamped butterfly backrest without seams, patient elbow
support width 640mm
※\t3\tQuick backrest up/down, only 9 seconds from the highest position of the
backrest to the lowest position
\t4\tHeadrest with push-button adjustment, full metal pillow holder
\t5\tSeat lift range: 380~840mm; backrest pitch range: 110~183。
※\t6\tEquipped with push-pull one-key water, air and electricity main switch
※\t7\tMatte surface non-slip double handrail, the right handrail can be
automatically positioned at the upper and lower ends
\t8\tSanitary ceramic spittoon that can be rotated 180 。, the spittoon bowl
can be removed for cleaning
※\t9\tHandpiece hanger, control panel integrated dentist tray, built-in film
viewing lamp, control panel 30 。 facing the user, six hanger positions,
independent adjustment of handpiece cooling water, stainless steel tray
※\t10\ta four-way rocker foot switch in the middle of the rear end of the patient
seat base
※\t11\tfoot control and water supply control buttons on the outside of the
patient seat bottom plate
\t12\tStrong and weak suction stainless steel handle with adjustable flow rate
with silicone nozzle
※\t13\tSeat interlock safety system, the seat position control system is
completely locked when the pedal is stepped on
※\t14\tOne-key spit position, when the patient needs to spit, one-key lifts the
backrest, and one-key returns to the original treatment position after
\t\tspitting
※\t15\tReflective LED dental light, sensor switch and luminance adjustment:
yellow light/white light/mixed
\t16\tExternal one-piece strong and weak suction filter, located on the
assistant side
\t17\tIntegral assistant rack with sub-control panel, with 4 rack positions, can
be rotated 180 。 horizontally
※\t18\tMagnetic side box doors on both sides for easy opening
\t19\tBuilt-in floor box, with plastic power protection cover
※\t1\tIntegral patient seat lift frame and base plate, sanitary PU foot pad
※\t2\tIntegral stamped butterfly backrest without seams, patient elbow
support width 640mm
※\t3\tQuick backrest up/down, only 9 seconds from the highest position of the
backrest to the lowest position
\t4\tHeadrest with push-button adjustment, full metal pillow holder
\t5\tSeat lift range: 380~840mm; backrest pitch range: 110~183。
※\t6\tEquipped with push-pull one-key water, air and electricity main switch
※\t7\tMatte surface non-slip double handrail, the right handrail can be
automatically positioned at the upper and lower ends
\t8\tSanitary ceramic spittoon that can be rotated 180 。, the spittoon bowl
can be removed for cleaning
※\t9\tHandpiece hanger, control panel integrated dentist tray, built-in film
viewing lamp, control panel 30 。 facing the user, six hanger positions,
independent adjustment of handpiece cooling water, stainless steel tray
※\t10\ta four-way rocker foot switch in the middle of the rear end of the patient
seat base
※\t11\tfoot control and water supply control buttons on the outside of the
patient seat bottom plate
\t12\tStrong and weak suction stainless steel handle with adjustable flow rate
with silicone nozzle
※\t13\tSeat interlock safety system, the seat position control system is
completely locked when the pedal is stepped on
※\t14\tOne-key spit position, when the patient needs to spit, one-key lifts the
backrest, and one-key returns to the original treatment position after
\t\tspitting
※\t15\tReflective LED dental light, sensor switch and luminance adjustment:
yellow light/white light/mixed
\t16\tExternal one-piece strong and weak suction filter, located on the
assistant side
\t17\tIntegral assistant rack with sub-control panel, with 4 rack positions, can
be rotated 180 。 horizontally
※\t18\tMagnetic side box doors on both sides for easy opening
\t19\tBuilt-in floor box, with plastic power protection cover
No | Configuration | Quantity |
1 | Cast steel chair frame | 1 |
2 | Wide butterfly backrest,cast steel back support | 1 |
3 | PU cushion | 1 |
4 | Sanitary PU foot pedal | 1 |
5 | Up and down motors | 2 |
6 | Magnetic side box doors on both sides for easy opening | 1 |
7 | Reflector LED sensor dental light: yellow/white light/mixed | 1 |
8 | 24V constant temperature water heater system | 1 |
9 | Water bottle water supply system | 1 |
10 | 3-way syringe(cold/hot) with stainless steel handle | 1 |
11 | Main and assistant control system | 1 |
12 | Dentist stool | 1 |
13 | 180 。 rotatable, removable sanitary ceramic spittoon | 1 |
14 | Air and water negative pressure system | 1 |
15 | strong and weak suction stainless steel handle + silicone nozzle | 1 |
16 | Silicone handpiece tube | 1 |
17 | 4-way foot control | 1 |
18 | Foot control flush, water supply control system | 1 |
19 | Hanger integrated instrument tray | 1 |
20 | LED x-ray viewer | 1 |
Recommend Products
Company information
Production workshop
Customer feedback
Mode of transport
FAQ
1. Are you a manufacture or trader ?
----We are a professional manufacture , we have our own produce team and sales team, we also provide one-stop service.
2. What's your MOQ ?
----For this product, MOQ is 1 unit.
3. How long is the warranty time ?
----We supply 12 months warranty time ,during this time we will help you solve any problems.
4. Do you provide OEM/ODM Service ?
----Yes, we provide this service to meet different requirements , different budget to all clients.
5. How are we going to install the equipment
after purchasing ?
----We will provide user manual comes with machine ,also professional installation video to help you .
6.What payment terms you support ?
----We accept T/T, credit card ,Visa card, Paypal etc.
7. What is your delivery time ?
----It depend on your qty,if we have it in stock ,we can ship in 3 days after receive deposit ,if we don’t have it in stock
,normally production time is 7-10 working days .
8. Do you have CE and ISO certificate ?
----Yes, most of our products have the CE and ISO certificate
----We are a professional manufacture , we have our own produce team and sales team, we also provide one-stop service.
2. What's your MOQ ?
----For this product, MOQ is 1 unit.
3. How long is the warranty time ?
----We supply 12 months warranty time ,during this time we will help you solve any problems.
4. Do you provide OEM/ODM Service ?
----Yes, we provide this service to meet different requirements , different budget to all clients.
5. How are we going to install the equipment
after purchasing ?
----We will provide user manual comes with machine ,also professional installation video to help you .
6.What payment terms you support ?
----We accept T/T, credit card ,Visa card, Paypal etc.
7. What is your delivery time ?
----It depend on your qty,if we have it in stock ,we can ship in 3 days after receive deposit ,if we don’t have it in stock
,normally production time is 7-10 working days .
8. Do you have CE and ISO certificate ?
----Yes, most of our products have the CE and ISO certificate
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
