• Home
  • Categories
  • Electric Heating ITO Coated Conductive Glass with Bus Bar for Camera Lens
Electric Heating ITO Coated Conductive Glass with Bus Bar for Camera Lens
Electric Heating ITO Coated Conductive Glass with Bus Bar for Camera Lens
Electric Heating ITO Coated Conductive Glass with Bus Bar for Camera Lens
Electric Heating ITO Coated Conductive Glass with Bus Bar for Camera Lens
Electric Heating ITO Coated Conductive Glass with Bus Bar for Camera Lens
Electric Heating ITO Coated Conductive Glass with Bus Bar for Camera Lens
Electric Heating ITO Coated Conductive Glass with Bus Bar for Camera Lens

Electric Heating ITO Coated Conductive Glass with Bus Bar for Camera Lens

Share on (1601164036088):


Price:$2.50 - $4.00

Quantity:


Product Overview

Description



Product Description


ITO Coated Conductive Glass
ITO conductive glass is made of silicon dioxide (SiO2) and indium tin oxide (commonly known as ITO) film plated by magnetron sputtering method on the basis of soda-lime or borosilicate glass.

ITO is a metal compound with good transparent and conductive properties.
It is widely used in affirmative display devices, solar cells, and special functional window coatings. Laboratory equipment and other optoelectronic devices.
FTO conductive glass
FTO conductive glass is fluorine-doped SnO2 transparent conductive glass (SnO2: F), referred to as FTO.





ITO glass parameters


Product Name:
ITO coated glass substrate, ITO conductive glass slide
Standard Size
(Length × width):
1" x 3" (25.4x76.2 mm), 1" x 1" (25.4x25.4 mm),
10 x 10 mm, 50 x 50 mm, 100 x 100 mm, 300 x 300 mm
(Or specific size can be customized)
Standard Thickness:
0.5mm, 0.7mm, 1.1mm, 2.0mm or 3.0mm (other thickness can be customized.)
Resistance :
4~5 ohm/sq, 6~8 ohm/sq,10~15 ohm/sq,20~30 ohm/sq, 30~40 ohm/sq, 60~80 ohm/sq, 80~100 ohm/sq, 300~500 ohm/sq, or others
Transmittance:
≥87% （at 550nm wave length)
ITO thin Film thickness:
185nm ( 6~8 ohm/sq);
135nm ( 10~15 ohm/sq)
Glass substrate
soda-lime glass
Application:
Mobile phone screens, PDAs, calculators, electronic watches, electromagnetic shielding, photocatalysis, solar cells, biological
experiments, major university laboratories and other new scientific and technological fields;







How to use and store conductive glass

1. When taking and putting it down, it can only touch the four sides, not the conductive glass ITO surface;
2. Handle with care, not collide with other fixtures and machines;
3. If you store for a long time, you must pay attention to moisture, the humidity should be below 65%, so as not to affect the resistance and transmittance of the glass.
4. The glass should be placed vertically, and the stacking between the glasses should not exceed two layers.




ITO glass cleaning

During the production, packaging, and transportation of ITO/FTO conductive glass, the surface of the glass may be contaminated by impurities such as dust or grease. Before using ITO/FTO conductive glass, it is necessary to clean it. There are many cleaning methods, the most commonly used is ultrasonic cleaning with organic solvents. Grease stained on the glass surface is insoluble in water, but it is soluble in organic solvents such as toluene, acetone, and ethanol.




Product pictures
.







Detail Images


We provide ITO patterning as your designs.
Seamed edge or CND defined edge.
Drilling holes is available.


Recommend by Seller






Packing






Shipping




Company Introduction


Saida Glass founded in 2011, covered more than 8000 ㎡, over 100 employees. We fully takes your ‘’ design-to-market’’ needs and offers excellent glass deep processing services from sheet glass to customized shape with different surface treatment. A robust quality management system (QMS) and quick-response sales engineer to enable your products reach a higher level through the market. As a well-known glass supplier, we are working with many famous enterprises such as ELO, CAT, Holitech, Tefal and other companies. Wide product range to cooperate with:
● Display cover glass
● Screen protective glass
● Tempered glass for household appliance
● Smart touch light switch
● LED Lighting glass panel










Customer Visiting & Feedback




FAQ


1. who are we?
We are based in Guangdong, China, start from 2016,sell to Domestic Market(20.00%),North America(20.00%),Northern Europe(10.00%),Western Europe(10.00%),Eastern Asia(10.00%),South America(5.00%),South Asia(5.00%),Mid East(5.00%),Central America(5.00%),Southeast Asia(5.00%),Eastern Europe(5.00%). There are total about 501-1000 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Cover Glass,Cover Lens,glass panel,customized glass,custom glass

4. why should you buy from us not from other suppliers?
Real Manufacturer

China 1st Factory with Fast Delivery, Warm Service, Professional Staff,
High Quality products

Wide Product Range covers almost all glass of Thickness 0.26-15mm, Size<120"

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,DDP,DDU,Express Delivery；
Accepted Payment Currency:USD,EUR,JPY,CAD,HKD,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union,Cash;
Language Spoken:English,Chinese


We Recommend

New Arrivals

New products from manufacturers at wholesale prices

0.1539 s.